diy-thermocam

diy-thermocam copied to clipboard

Hey Max, hey git hub community, many thx for the really nice Thermocam! What i did so far... - I build up the Thermocam V3 from groupgets as your introduction...

aiermandi

Lepton 3.5

10

Hi, in the description it is stated the Lepton "including the radiometric versions (Lepton2.5 only at the moment)" are supported. Is this still correct or is Lepton 3.5 (the radiometric...

WolfZ

MTP device Windows 10

5

hi, i just got my teensy 4.1 and first wanted to try out loading the firmware. so i plugged it in and loaded the v3 hex-file (using Teensy Loader 1.52...

helmarw

psarossy

finished my Themocam, a few remarks for the Enclosure

5

got my display finally :) every thing is working fine !  i decided to 3D-print the enclosure first before i order a laser cut (if any) good thing i...

helmarw

Image transmission via wifi

2

hi Max I put together a Diy-Thermocam according to your design and it works fine. Have you ever wondered whether to use diy-thermocam to send an image via wifi. It...

Janusz-Janiec

Cam hangs on Boot Screen, Hardware Issue?

13

Hello together, my Thermocam won't boot, what I see is the Boot Screen. I guess it's is a hardware problem. I use the PCB Rev 2.3 with the new Lepton...

Catarallus

DiyThermocam V2 Touch lcd

2

Hi. Diythermocam V2. 0 can work with the screen where is the capacitive sensor installed? Or just resistive? Thanks.

Primergi

Arducam 2mp mini plus ov2640

4

Need help! There is no image from the camera arducam 2mp plus-rev-A working camera checked on arduino uno. What needs to be changed in firmware 2.48 to make it work?...

ncbelov

Camera not working

2

We used the flip lepton 2 and the firmware doesn’t appear to work. Please help!

gregg26