a4tech-bloody-linux-driver

a4tech-bloody-linux-driver copied to clipboard

libusb-1.0 not found

1

libusb not found while building via cmake ``` $ cmake . -- Checking for one of the modules 'libusb-1.0' CMake Error at /usr/share/cmake-3.18/Modules/FindPkgConfig.cmake:797 (message): None of the required 'libusb-1.0' found...

merajmasuk

Not connecting. LIBUSB_ERROR_TIMEOUT

1

I can't solve the problem....LIBUSB_ERROR_TIMEOUT **sudo ./bloody** _Available devices: 2:Bloody P91 Enter device address: 2 Current backlight level: LIBUSB_ERROR_TIMEOUT 239 Select backlight level(0-3):0 LIBUSB_ERROR_TIMEOUT Select backlight level(0-3)_ **Mouse.cpp** _case BLOODY_J95S_PID:...

ForumLiker

I have a J95s mouse which should be supported, but it doesn't seem to work at all. Whatever I change I get "WRONG USE OF SetSensitivity". Do you have any...

donaastor

Tested this program with Bloody A70, which should be similar to A7. Works for at least turning on/off the backlight.

vcprocles

Since it appears that A4Tech may be reusing code for different mice, would it theoretically be possible to add support for, say, the BW-35 or the RBW-5?

moriel5

add bloody r8/r80 pid 5124 Bus 001 Device 011: ID 09da:5124 A4Tech Co., Ltd. USB Device Ready to report everything you need

hinteor

Are there any plans for supporting such mouse?

sandikata

Wrong pid for V5

1

BLOODY_V5_PID = 0x172A; //Wrong BLOODY_V5_PID = 0x17A2; //Correct

RyvkinSergey

PID for T50

1

Hi! Pid for Bloody T50 - 0xf6eb Tested with Ubuntu 16.04

codeh4nter

PID for Bloody Blazing A90

1

I've found PID for Bloody Blazing A90 - 0x142c. Backlight brightness changing works fawlessly, firmware version unknown, on Windows 7 works with Bloody 6 20180312. Pozdrawiam :+1:

roko772