mattreim

Hey @Smanar, since this device is new, it's possible it uses the same divisor as IKEA or LEDVANCE, but that's resolved now. I also think it's more likely a problem...

@1100101 The second DDF was not detected. Please check if the old DDF has been removed. And make sure that the individual sockets can be switched on and off. They...

Now I remember, the default value doesn't work. Mine was always open anyway before I fixed it with HA. The Parasoll isn't very good and causes problems for many people....

@rootiam The `python_script.set_state` function allows you to temporarily override the value, and it will remain that way as long as HA is running.

@manup There could be a bug in the startup routine for all sensors because my Parasoll also always goes from unavailable to true at startup. Or is it the faulty...

Try: `http://IP:PORT/apiKEY/sensors/205/config` => `{"devicemode":"click or switch"} `

Sorry @Smanar, this device really interested me because it has a radar and a PIR sensor. The idea is to introduce two "$TYPE_PRESENCE_SENSOR" sensors, one with a Tuya cluster and...

@Smanar At least that's what [Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/ZG-204ZM.html) says, and it would fit with saxn-paule's statement (Tuya). The screenshots also point to a generic presence sensor (IAS with sensitivity). Of course, I...

Further information can be found here [Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/ZG-204ZM.html). Regarding the Illuminance sensor, I think you are missing the script again; please try the DDB. - Firmware -> ok - Battery ->...

Sorry @Drapiece for the delay. Please try uploading the DDB file in the zip archive directly to Phoscon. Then delete the sensor and reconnect. > [pir_presence_and_light_sensor.zip](https://github.com/user-attachments/files/23755733/pir_presence_and_light_sensor.zip)