arduino-lmic

arduino-lmic copied to clipboard

AS923

1

Hello, Is there a way to set the frequency plan to AS923? More specifically, I'm interested in the 920-923 frequency range. Best regards

maximemoreillon

Packet transmission fails after ~200 successful transmissions.

2

ABP Node starts off sending data on a 30-second interval but fails after sending around 200 packets. LMIC Debug data show “uplink delayed until …” error. Last few lines of...

akshaim

LoRaWAN v1.0.2 > _14 The margin (Margin) is the demodulation signal-to-noise ratio in dB rounded to the nearest 15 integer value for the last successfully received DevStatusReq command. It is...

ghost

I have a dual channel gateway. Thus, i can configure two channels in parallel. I configured 868.3 MHz on one radio module and 868.1 Mhz on the other. OTAA worked...

ghost

EV_JOINING block

3

Hello, I saw quite a lot of tutorials, advices, DIY, to solve my problem, but I still can't reach the solution. I have an Adafruit 32u4, wired IO1 to 6,...

N4zbr0cK

Hello everyone. I'm using heltec's ESP32 for testing, together with LMIC. I'm currently using the OTAA example to try to forward a data up in the TTN. I get confirmation...

genoinosonda

Hello, i want connect some lora modules that i have at home. But problem ist that all of software stuff are for rfm95/96. My biggest problem ist connection to Arduino...

shajek

my node's downlink message keep waits message to uplink message.. This is lame on smart city command via light or electricty so how can we change it to Class-C ?...

halukmy

Can have that library a TX_INTERVAL over 3600?

11

Hello, (can you read my fift post?) I actually have a problem and I have pain to debug or to find the start point to debug it. I am collecting...

pierrot10

config.h to support sub-bands

1

Hi, TTN in Australia utilizes 915 sub-band 2 for gateways... https://github.com/TheThingsNetwork/gateway-conf/blob/master/AU-global_conf.json Can this be added as an option in config.h or does the frequency range need to be added explicitly...

robertsmarty