Llama-Mini-Firmware
Llama-Mini-Firmware copied to clipboard
matthewlloyd
Unofficial Firmware for the Prusa Mini
Hello, As I currently did a upgrade to the bear frame, the hardcoded motor current does not suffice anymore for Z. Where exactly can I edit the motor currents? M907...
Is it possible to implement the power loss recovery feature like the MK3 for example? Prusa promised this long ago but never happed for the MINI. It would be great...
Printer type: MINI Optional upgrades: PID autotune It would be great if there was an easy way to manage PID autotune from the main menu. At the moment it is...
**Printer type** - MINI+ with SuperPinda **Printer firmware version**- v1.0.7 (based on Prusa Buddy 4.3.3-final) **Custom firmware - Llama **Optional upgrades** - Filament Runout Sensor **USB drive or USB/Octoprint** USB...
Do you think we can have your modded firmware based on Prusa Buddy 4.3.4? Thanks
Printer type: MINI Optional upgrades: ESP Wifi Module It would be great if we could use the intended ESP module to enable wifi printing. I don't know what are the...
Please create an option to resize the bed. I would like to enlarge the printable area. Also, please specify that the bed is not heated. Unfortunately, the calibration is set...
Please add the option to configure the number of MBL measurement points. I see it has been requested and implemented in the MK3 firmware here: https://github.com/prusa3d/Prusa-Firmware/issues/1239 as well as requested...
I enabled the uart6, tested with ESP3D. ESP3D also work as wireless serial bridge for octoprint with OctoPrint-Network-Printing.
Hello @matthewlloyd After replacing the stock extruder with a pancake nema 17 (direct drive) , my esteps need to be set to 830 It seems that the max setting in...
