redox-keyboard
redox-keyboard copied to clipboard
mattdibi
Ergonomic split mechanical keyboard
Hi, I recreated the KiCad files for the redox wireless v2, the original files are lost to time. I took the KiCad from the v1 and modify until it match...
It looks like the rev 1 kicad files were updated with the 2.0 commit, but it doesn't have the actual updated files for the rev 2.0 board.
Hello, I've been working on my Redox Wireless 2.0 for the past several months. It's certainly been a journey. I didn't want to make a Github issue if I could...
CNC case
Hi there, So this is more of a request than anything else, I am busy building like my 4th redox, but I want to do something different, I want to...
So I finally have a working redox keyboard after a lot of incompetency on my part. I noticed you don't have any info about the Elite C, and my keyboard...
Hi I am very new to this and would appreciate any help if possible. Im currently trying to build a redox w keyboard, but wanted to hand wire it, (so...
Hi @mattdibi Got a general question about the comms interface between the uC running QMK firmware and the transciever. As I understand it, the interface is pretty simple — the...
See https://github.com/qmk/qmk_firmware/issues/15217 Confirmed with QMK Firmware 0.16.9 Using I2C will cause the keyboard not to be recognized. Should be fixed in QMK, but mentioned in the docs here. Would've saved...
I have completed my wireless build and the receiver doesn't seem to work. I have attached GDB via the SWD interface and it seems as though PC is stuck at...
Hi all, I have two strange random problems with my build and I would like to ask for help :) I built my Redox about 4 years ago. Since then...
