mib2std-toolbox
mib2std-toolbox copied to clipboard
mattcabb
Progress
Wow!
Just seen on a technisat too!
Well done, care to share how its done?
Marek, nie denerwuj nas. Publikuj to!
... ciągle w fazie testów, brak czasu ;))) (... still in "testmode" I am out of time ;))))
@mattcabb how's your project going, are you doing anything at all? :)
since the mib solution leaked out, there's basically full filesystem access available for everyone that want's it. Not going to develop this tool right now as I have other projects to push forward.
@mattcabb how's your project going, are you doing anything at all? :)
since the mib solution leaked out, there's basically full filesystem access available for everyone that want's it. Not going to develop this tool right now as I have other projects to push forward.
Could you share any link for this solution or just send it to email : [email protected] ? I want to activate AA on my Leon, but I cant find toolbox for MIB2 standard. Thank you very much.
Can’t be shared on here but look on MHH auto, car-technology or xda and you will find it easy enough 👍
Can’t be shared on here but look on MHH auto, car-technology or xda and you will find it easy enough 👍
I found only posts with resellers, didnt find free software. Could you send me this toolbox if you have it?
What do you need?
Charlie
On Mon, 14 Dec 2020, 17:57 jonny190, [email protected] wrote:
Anyone found any links on how to?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/mattcabb/mib2std-toolbox/issues/5#issuecomment-744608373, or unsubscribe https://github.com/notifications/unsubscribe-auth/AF6N44VQEN4QT6SJJ6ZKUDLSUZGYTANCNFSM4PUCYIBQ .
This was my only resource for getting android auto and I can't find any other links apart from paid ones
Hi everyone,
sorry for asking once again, but I've looked into the mib solutions as mentioned by @mattcabb and I wasn't really able to find what I am looking for. I have a MIB2Std with part number 5QA035858A and I am looking for a way to add a graphic which is missing in the auxiliary heating menu of my unit. I already explained it in more detail here. Does anyone know if this is possible with the leaked mib solution and could provide me some more information about this? Basically everything I found so far was either not free or not for my specific unit. Any hint would be highly appreciated!
...同时..。))
马立克，尼德内沃吉纳斯。普立克吉托！
...Ciągle fazie testów，Brak czasu；))(.(仍然处于“测试模式”，我已经没有时间了；)
Great. Can you share how you did it?
Hello, I have MIB2 STD and basically I want to activate Full link. HU version is MST2_EU_SE_ZR_P0359T and that device does not have navigation. It has only single SD card slot. Device part no 5QA035824A.
I tried to install MIB2 toolbox and some patches but it was not successful.
I have learnt it is possible but I need to activate telnet/console for it and to do that I need to solder Hu but I could not find that how to do that. Is there any article or example for it?
I would be happy if someone show me how to do that.
Merhaba, MIB2 STD'im var ve temel olarak Tam bağlantıyı etkinleştirmek istiyorum. HU sürümü MST2_EU_SE_ZR_P0359T ve bu cihazda navigasyon yok. Sadece tek bir SD kart yuvası var. Cihaz parça numarası 5QA035824A.
MIB2 Toolbox'ı ve bazı yamaları yüklemeyi denedim ama başarılı olamadım.
Bunun mümkün olduğunu öğrendim ancak bunun için telnet/konsolu aktifleştirmem gerekiyor ve bunu yapmak için Hu'yu lehimlemem gerekiyor ancak bunu nasıl yapacağımı bulamadım. Bunun için herhangi bir makale veya örnek var mı?
Bunu nasıl yapacağımı bana birisi gösterirse mutlu olurum.
Hello, I have MIB2 STD and basically I want to activate Full link. HU version is MST2_EU_SE_ZR_P0359T and that device does not have navigation. It has only single SD card slot. Device part no 5QA035824A.
I tried to install MIB2 toolbox and some patches but it was not successful.
I have learnt it is possible but I need to activate telnet/console for it and to do that I need to solder Hu but I could not find that how to do that. Is there any article or example for it?
I would be happy if someone show me how to do that.
Hello, I have MIB2 STD and basically I want to activate Full link. HU version is MST2_EU_SE_ZR_P0359T and that device does not have navigation. It has only single SD card slot. Device part no 5QA035824A.
I tried to install MIB2 toolbox and some patches but it was not successful.
I have learnt it is possible but I need to activate telnet/console for it and to do that I need to solder Hu but I could not find that how to do that. Is there any article or example for it?
I would be happy if someone show me how to do that.
Hello Ahmet,
Have you found a toolbox for your device? My device is the same. I couldn't yet :(
Merhaba, MIB2 STD'im var ve temel olarak Tam bağlantıyı etkinleştirmek istiyorum. HU sürümü MST2_EU_SE_ZR_P0359T ve bu cihazda navigasyon yok. Sadece tek bir SD kart yuvası var. Cihaz parça numarası 5QA035824A. MIB2 Toolbox'ı ve bazı yamaları yüklemeyi denedim ama başarılı olamadım. Bunun mümkün olduğunu öğrendim ancak bunun için telnet/konsolu aktifleştirmem gerekiyor ve bunu yapmak için Hu'yu lehimlemem gerekiyor ancak bunu nasıl yapacağımı bulamadım. Bunun için herhangi bir makale veya örnek var mı? Bunu nasıl yapacağımı bana birisi gösterirse mutlu olurum.
Hello, I have MIB2 STD and basically I want to activate Full link. HU version is MST2_EU_SE_ZR_P0359T and that device does not have navigation. It has only single SD card slot. Device part no 5QA035824A. I tried to install MIB2 toolbox and some patches but it was not successful. I have learnt it is possible but I need to activate telnet/console for it and to do that I need to solder Hu but I could not find that how to do that. Is there any article or example for it? I would be happy if someone show me how to do that.
Hello, I have MIB2 STD and basically I want to activate Full link. HU version is MST2_EU_SE_ZR_P0359T and that device does not have navigation. It has only single SD card slot. Device part no 5QA035824A. I tried to install MIB2 toolbox and some patches but it was not successful. I have learnt it is possible but I need to activate telnet/console for it and to do that I need to solder Hu but I could not find that how to do that. Is there any article or example for it? I would be happy if someone show me how to do that.
Hello Ahmet,
Have you found a toolbox for your device? My device is the same. I couldn't yet :(
There is no toolboxes for your units because they are installed using POI vulnerability in navigation. You can use miv-helper though to check what are your options
Thank you for a quick reply @fikaa73 What do you mean with "miv-helper"?
Thank you for a quick reply @fikaa73 What do you mean with "miv-helper"?
Sorry, mib-helper.com it is. Be aware that everything you do, it’s on your own responsibility, and there is a chance that you will brick your unit. Read carefully and don’t start anything if you don’t understand whole process.
Thank you @fikaa73
I tried the web site and I got some results. But I don't know that it is available or not. Can you check it please?
https://mib-helper.com/index.php?train=MST2_EU_SE_ZR_P0359T#details
Thank you @fikaa73
I tried the web site and I got some results. But I don't know that it is available or not. Can you check it please?
https://mib-helper.com/index.php?train=MST2_EU_SE_ZR_P0359T#details
It’s on number 6: Activators, that’s what you’re looking for. Mibwiki.one could also be helpful