HScope

HScope copied to clipboard

PCF8574 i/o expander on wifi connection

1

I'm trying to get additional button on hs402 wifi connection, any chance to make this work ?

warehouseElc

Request for HS104

3

First of all, I am sorry for opening an issue entry but actually I could not find any other practical method. Dear martinloren, thank you for your wonderful work. It...

zx080

i use STM32F401 and flash with HS402_V1.6_F401.bin，when connect to my phone（LG V50 with Android 11），it Cannot detect the HS402 Oscilloscope， I Check my phone with a USB disk ，the OTG...

superid888

Sept 2019 Improvements

4

**Zero Level Calibration** The pop up window says: 2) Sconnect the probe or shortcut to GND. This should probably read 'Disconnect'. Maybe it is even better to leave disconnect out...

martinloren

I am using the licensed version of HScope. But the firmware HS101_BLT_V10.1.bin does not work for me, the version HS101_BTL_v9.bin works fine. What could be the problem? Will there be...

bigalex777

Question on ASM1117

4

Hi, I wonder why you use IC AMS1117-1.2v in 5v Best Module. The output pin is not used, is 1.2v important or can it be replaced with a 1.8v or...

petanque

#### Feature request (nice to have) : First of all, thank you for a great project. Is it possible to have a custom brightness level setting instead of just a...

mmghv

Option for avoid sleep mode

1

Add an option in the Settings to avoid the sleep mode.

martinloren

HS402 firmware v 1.5 - crosstalk between channels.

1

Hello In the HS402 oscilloscope with firmware version 1.5, crosstalk is created between the channels. If both channels are enabled in the app, part of the signal connected to one...

otapix

Problem with HScope and LHT00SU1

1

I am using a Lenovo A3500FL/Android 7.1 with HScope. HScope detects the LHT00SU1 ok, but only displays a straight line, Ch1 [pk-pk 0mV DC, 8,91V]. I have tested HScope on...

rkardell