Wifi name with _ not work on webpage

[dmolner]

Hello,

I test the firmware and when i put xxx_xxx in SSID not work I put in Arduino IDE Monitor serial the same and work correctly.

I can't work it in D1 mini

[martin-ger]

WPA2 password must be at least 8 chars.

Von: dmolner @.*** Gesendet: Montag, 26. April 2021 10:01 An: martin-ger/esp_wifi_repeater Cc: Subscribed Betreff: [martin-ger/esp_wifi_repeater] Wifi name with _ not work on webpage (#454)

Hello,

I test the firmware and when i put xxx_xxx in SSID not work I put in Arduino IDE Monitor serial the same and work correctly.

I can't work it in D1 mini

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/martin-ger/esp_wifi_repeater/issues/454 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AF2UTCZMPZ6SHRCDXHGNY43TKUMVRANCNFSM43SKVPHQ . https://github.com/notifications/beacon/AF2UTC7SZBKBAITEEO6YQ2LTKUMVRA5CNFSM43SKVPH2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4M5TMJPA.gif

[dmolner]

My SSID is xxxx_xxxxx 10 caracters Password is 14 caracters

[elijash]

WPA2 password must be at least 8 chars.

Von: dmolner @.*** Gesendet: Montag, 26. April 2021 10:01 An: martin-ger/esp_wifi_repeater Cc: Subscribed Betreff: [martin-ger/esp_wifi_repeater] Wifi name with _ not work on webpage (#454)

Hello,

I test the firmware and when i put xxx_xxx in SSID not work I put in Arduino IDE Monitor serial the same and work correctly.

I can't work it in D1 mini

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/martin-ger/esp_wifi_repeater/issues/454 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AF2UTCZMPZ6SHRCDXHGNY43TKUMVRANCNFSM43SKVPHQ . https://github.com/notifications/beacon/AF2UTC7SZBKBAITEEO6YQ2LTKUMVRA5CNFSM43SKVPH2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4M5TMJPA.gif

same problem with AP using space character