esp32_nat_router
esp32_nat_router copied to clipboard
martin-ger
A simple NAT Router for the ESP32
Hi, l would like to create on AP side of ESP32 NAT Router a network based on fixed IP address for the devices. I don't find any command to create...
Dear Martin, I have a wifi adhoc network working as an access point. Its IP address is 192.168.4.1. It streams a set of data on port 5 when a client...
I installed this and connected one esp cam but I can't find the cam. I can however use the wifi on my phone. Any ideas?
Hi there, i am using a '%' in my Wifiname and everthing behind it is cutoff. Example ABC%123 then only ABC% will be stored. how to solve this? thanks Peter
1. Flashed firmware 2. Connected to `ESP32_NAT_Router` AP 3. Setting STA Settings: SSID=foobar Password=[63 ASCII chars] 4. Click connect The I get `Header fields are too long for server to...
Honeygain is a service which requires one device per IP to work. I was wondering if this project would allow me to do so by creating multiple mini routers. Thanks...
How to use esp32_nat_router as a library and how to use gpio with it and how to use other libraries with esp32_nat_router.
Setting Default Log Verbosity to "No output" in menuconfig causes no internet. I am looking through and do not see a reason for this to happen. Is there a place...
Is it possible to include ESP32 Wireguard library to be able to connect to private network and allow all AP clients to reach the private LAN?
The esp32 setup connects to the internet without setting a static ip. But as soon as I set it, connection to the internet stops. It is connected to my router,...
