marshr32

I've been having similar issues with my kit. For me the DIP switches are the right way around, so 4 is calibrate and 3 is closed loop. 4 being the...

So @MetalBeard72 from your wiring pic at the top, try swapping positions of the red and black wires only. If you even still give a shit that is!

I know this is from a while back, but for any other poor bastard looking for a solution, try this https://github.com/bigtreetech/BIGTREETECH-S42B-V1.0/issues/24#issuecomment-950551658

@chrisla23 As a work around for pausing at the corners you could right click each corner and "jog to here". It's more work of course, but would get the result.

What ever happened to this idea? It's brilliant! It'd be really useful to be able to replace M06 with my tool change macro.

Gah, that's a bummer. But thanks for your work thus far :)

I know this is old but this may help someone else. Not sure about your particular setup, but I don't use the probe module. Instead I made the attached macro...

This happened again yesterday with a move on the Y axis at 1000mm/min, well below the 8000mm/min max

Hi, hope you've all had a great christmas/new year. As an update, I've had this happen a few times more when X/Y feedrate is 1000mm/min (which is below max, that's...

Hi again, I'm guessing you guys know this but I just thought I'd put it out there...... does UGS send a jog cancel command when the analog sticks are returned...