Muhammad Arsalan Siddiqui

i have compiled pping, and make arsalan owner of LireQos directory and it compiled successfully.

I will share my result with you tommorow

> Also, going forward, whenever you see $(HOME) just replace that with your regular username (arsalan). That way it doesnt change to the root users directory by accident when you...

In previous attemt i run LibreQoS.py, graph.py and lqAPI.py when i run lqAPI.py it gives me error that flask is not installed

> Run these two lines `python3 -m pip install flask` `sudo python3 -m pip install flask` I have updated the wiki to mention flask, sorry about that. thanks :D i...

one more thing that when i run LibreQoS.py i see in dmesg that: kernel: HTB: quantum of class 10001 is big. Consider r2q change. then with increasing number it is...

**arsalan@qos:~/LibreQoS/v1.1$ ethtool -l eno3** Channel parameters for eno3: Pre-set maximums: RX: 8 TX: 8 Other: n/a Combined: n/a Current hardware settings: RX: 8 TX: 8 Other: n/a Combined: n/a **arsalan@qos:~/LibreQoS/v1.1$...

Site_1 Download: 950 to 1000 Mbps Upload: 950 to 1000 Mbps tc class add dev eno4 parent 1:1 classid 3 htb rate 950mbit ceil 1000mbit prio 3 tc class add...

I did not explain myself correclty, I'm not talking about source devices, as in the example two source devices with same circuit and different IP Address (100.64.0.5 & 100.64.0.6) is...

What about a u32 match $TC filter add dev $IMQ parent 1: protocol ip prio 1 u32 match ip dst $IP_Address flowid 1:10 Or marking traffic if they go to...