Bed_Distance_sensor icon indicating copy to clipboard operation
Bed_Distance_sensor copied to clipboard
verified publisher icon markniu

Real Time leveling

Open Val-dose-things opened this issue 10 months ago • 2 comments

G28 BDSENSOR_SET REAL_TIME_HEIGHT=0.3 G1 Z0.2

results in:

Image

Image

klippy.log

i believe its and issue with it triggering to protect it from crashing any ideas? everything else is working great.

Val-dose-things avatar Feb 25 '25 18:02 Val-dose-things

this is because the sensor and the z motors are not connected in the same MCU. it's not possible to do real time adjust from the high level python between different MCU during printing. so you need to change the connection from the extra mcu to the mcu of z motors.

markniu avatar Feb 26 '25 01:02 markniu

ahhhh ok that would make sense. this is what i get for trying to be fancy and us the extra mcu bltouch connection.

Val-dose-things avatar Feb 26 '25 07:02 Val-dose-things