Probe offset XY

[ManiekJG]

Don't know if it is normal behavior but looks like the y_offset: is not being applied during QGL nor bed mesh. I have set it to -23mm as it is in the back of the nozzle (Voron 2.4) but during QGL and Bed_Mesh it does not apply this offset i.e. when during QGL it the corner is X:50, Y:35 so my assuption is the probe should be in this location and hence it should be Y:12 but it is moving nozzle to Y:35 and do the QGL. This has caused the probe to leave bed and klipper restart even though the Probe point was withing the build surface.