Unknown command: Z_Move_Live

[drupi79]

Klipper version v0.12.0-179-g434770ea with the latest install of the stable BD Seneor apparently don't get along. I get the following error after flashing my board mcu 'mcu': Unknown command: Z_Move_Live

[markniu]

seems that the mcu didn't flash success or check if there is BD_sensor.o on the SSH while run compile command make

[LAZER555]

i have the same thing, and when i try to make the klipper.bin i get this error

Preprocessing out/src/generic/armcm_link.ld Building out/compile_time_request.o Too many message ids make: *** [Makefile:84: out/compile_time_request.o] Error 255

[LAZER555]

I tried to make without bdsensor, and it worked. It means something in your update was faulty

Building out/compile_time_request.o Version: v0.12.0-180-g79930ed9 Linking out/klipper.elf Creating hex file out/klipper.bin

Can you please revert back to when it worked?

[LAZER555]

seems that the mcu didn't flash success or check if there is BD_sensor.o on the SSH while run compile command make

there is a BD_sensor.o , but there's an error anyway

fly@flygemini:~/klipper$ make clean make -j4 Creating symbolic link out/board Creating symbolic link out/board Building out/autoconf.h Compiling out/src/sched.o Compiling out/src/command.o Compiling out/src/basecmd.o Compiling out/src/debugcmds.o Compiling out/src/initial_pins.o Compiling out/src/gpiocmds.o Compiling out/src/stepper.o Compiling out/src/endstop.o Compiling out/src/trsync.o Compiling out/src/adccmds.o Compiling out/src/spicmds.o Compiling out/src/sdiocmds.o Compiling out/src/i2ccmds.o Compiling out/src/pwmcmds.o Compiling out/src/buttons.o Compiling out/src/tmcuart.o Compiling out/src/neopixel.o Compiling out/src/pulse_counter.o Compiling out/src/lcd_st7920.o Compiling out/src/lcd_hd44780.o Compiling out/src/spi_software.o Compiling out/src/i2c_software.o Compiling out/src/thermocouple.o Compiling out/src/sensor_adxl345.o Compiling out/src/sensor_angle.o Compiling out/src/sensor_mpu9250.o Compiling out/src/sensor_lis2dw.o Compiling out/src/sensor_ldc1612.o Compiling out/src/sensor_bulk.o Compiling out/src/BD_sensor.o Compiling out/src/stm32/watchdog.o Compiling out/src/stm32/gpio.o Compiling out/src/stm32/clockline.o Compiling out/src/stm32/dfu_reboot.o Compiling out/src/generic/crc16_ccitt.o Compiling out/src/generic/armcm_boot.o Compiling out/src/generic/armcm_irq.o Compiling out/src/generic/armcm_reset.o Compiling out/src/../lib/stm32f4/system_stm32f4xx.o Compiling out/src/stm32/stm32f4.o Compiling out/src/generic/armcm_timer.o Compiling out/src/stm32/gpioperiph.o Compiling out/src/stm32/adc.o Compiling out/src/stm32/i2c.o Compiling out/src/stm32/spi.o Compiling out/src/stm32/sdio.o Compiling out/src/stm32/usbotg.o Compiling out/src/stm32/chipid.o Compiling out/src/generic/usb_cdc.o Compiling out/src/stm32/hard_pwm.o Preprocessing out/src/generic/armcm_link.ld Building out/compile_time_request.o Too many message ids make: *** [Makefile:84: out/compile_time_request.o] Error 255