Mark Harvey

You will need to investigate 'udev' and how to create a udev rule set. (often default is located in /etc/udev/rules.d/) The output of the 'build-persistent-tape-rules.sh' script and use the output...

The NBU command(s) To display tape devices # tpautoconf -t To display robot devices - will confirm what the GUI Wizard will discover.. # tpautoconf -r

> mark: i just rebooted the server and fixed the issue, now NBU can configure the VTL and backup successfully. i just thought uedvadm reload or trigger can create the...

Hi David, Thanks for the report. The messages are derived from the mhvtl.ko. To stop the sys_emit() from the kernel module : cat /sys/bus/mhvtl/drivers/mhvtl/opts (Should be '0' for no logging...

Thanks for the bug report. I obviously didn't think that one through :) I'll have a look at fixing this in the near future.

Hmm.. Not quite as straight forward as I was thinking..

Thanks for bug report. Hopefully it’ll be easy to implement ;) Sent from my iPhone > On 2 Mar 2020, at 08:50, scsirob wrote: > >  > This is...

Not quite that simple.. e.g. TS3100 states this contains a 72byte struct - Minutes of Operation - Number of Power-ups - Number of Firmware updates - Number of Loader moves...

Checking LTO-7 and it is stating: > 6.4.17 LP 30h: Tape Usage See LOG SELECT - 4Ch (see 5.2.7 on page 90) and LOG SENSE - 4Dh (see 5.2.8 on...

Many thanks for the bug report. I've been using vagrant recently and noticed the same thing with the Ubuntu install today. I hope to have patches ready with in the...