Mario Ruiz

Hi @sergey-gra There is a new C++ driver here https://github.com/Xilinx/xup_vitis_network_example/tree/master/xrt_host_api, unrelated to the one you have tried. Mario

This PR needs to be merged first https://github.com/Xilinx/PYNQ/pull/1368

Hi @victornvq2, You may need to provide more information. What is your setup? Where did you connected the QSFP28 port to? Mario

Hi Victor, As you are using the switch, you need to read this part of the FAQ https://github.com/Xilinx/xup_vitis_network_example#alveo-card-connected-to-a-100g-capable-switchnic-is-not-getting-link FEC and Auto negotiation aren't enable in VNx, so the switch has...

From the little information you are providing, I think VNx could work. However, you should do your own investigation to understand if VNx is suitable.

Hi @lizajoseph, This repository and associated IP will only work for 100 G. There is no current plan to support any other speed. There is a substantial body of work...

Closing at no activity has been seen in a long time.

Closing this as the solution is part of XRT 2022.2

Hi @sergey-gra, You need a standard NIC in the same server within the same sub network that is connected to the FPGA via QSFP26 to be able to run the...

Closing this issue as the C++ driver supports all the boards.