lsirec icon indicating copy to clipboard operation
lsirec copied to clipboard

LSI SAS2008/SAS2108 low-level recovery tool for Linux

Results 15 lsirec issues
Sort by recently updated
recently updated
newest added

I know this lsirec tool was not intended to be used with LSI SAS2208 chipset, but since there are lots of similarities between 2008/2108 and the 2208/2308, i tried using...

I'm not sure how to install this so I can use it.

I've upgraded the PERC firmware (https://fohdeesha.com/docs/H310.html) and have a working server again (PROXMOX installed and running). My point is related to those front LED lights. One works correctly (flashes whenever...

Hi Héctor! First thank you for doing awesome work with lsirec & Apple Mx Linux development. I'm grasping at straws here, I got for a very good price a (Dell?,...

While running `lsirec 0000:04:00.0 readsbr sas.sbr`, i am getting several lines of error that says "I2C: SCL Timeout!", then until around 100 lines, it returns "SBR saved to sas.sbr". But...

hello, I have installed a h700 raid card on the dell r610 server, but at startup it gives an error: Invalid PCIe card found in the Internal Storage slot! how...

Hello I have some trouble to flash the FCode. - x86 = mptsas2.rom - FCode = In which file is it stored? What does the FCode? - UEFI = x64sas2.rom...

Hey, thanks for making these tools! I'm running into an issue. I got a Fujitsu D2607 like you, and I've run into the same issue where only half of the...

Initially reporting as: ``` RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS 2008 [Falcon] [1000:0073] (rev 03) ``` Post flashing reporting as: ``` SCSI storage controller: Broadcom / LSI...

Hi, I have been trying to flash my PERC H710P with the LSI IT firmware for 2 days now. According to these instructions I proceed exactly as written, but after...