skymax-demo

skymax-demo copied to clipboard

Zero SCC-voltage

2

Hello! New problem with Voltronic Axpert King II. As I can see in your code, pv_input_watts = (scc_voltage * pv_input_current) * wattfactor; But SCC voltage always returns 0. Accordingly, there...

melnik-cto

Hello, trying to apply to a MasterPower (also Voltronic) [MasterPower PMS 5K-48TOP Off-Grid](https://duckduckgo.com/?t=ffab&q=MasterPower+PMS+5K-48TOP+Off-Grid) HINT: does this also work with USB-to-USB-Cable (Voltronic internal USB to Serial Cypress adapter) or only with...

Edgepath

Invalid JSON in hex stream

5

I have an MPP Solar LV 5048. It's a split phase unit containing two inverters and two charge controllers. It shares the same comms protocol as the supported models listed...

cowpen

plz update (simplify) build instructions :D

1

Hello, thanks for the awesome software work :dancing_women: please update build instructions: like this: ``` # -1) tested on hostnamectrl; # Debian GNU/Linux 11 (bullseye) # 0) have cmake installed...

Edgepath

Help me! The program does not work...

10

Hi Manio. MPP Solar / Infinisolar MPI 10k hybrid inverter pi@raspberrypi:~/skymax-demo/build $ sudo ./inverter_poller -1 -d Thu Jun 2 11:13:12 2022 INVERTER: Debug set Thu Jun 2 11:13:12 2022 INVERTER:...

zavoyko70

arduino

1

Hi, I'm trying to connect via arduino to the ivertor. Unfortunately, so far without success. Could I ask you for one raw command to read the firmware version, including the...

hedva92

Can't read data from Voltronic AXPERT MKS IV 5.6KW

6

I have tried to connect to a Voltronic AXPERT MKS IV 5.6KW but I get the following error message `INVERTER: Unable to open device file (errno=2 No such file or...

sebashb