mighty-1284p
mighty-1284p copied to clipboard
maniacbug
Mighty 1284P Platform for Arduino
Hi, I have been struggling to program an ATMEGA1284P for quite some time now. I'm using an external 16MHZ crystal with relevant 22pf capacitors. I am trying to use an...
hello ... I have a problem like in the picture..after adding the "hardware" folder and placing the file I have additional board options but I cannot compile the code ......
I have followed in detail Maniacbugs forum posting for developing on the ATMEGA1284, I checked all my hardware and made sure the oscillator was working, I checked all voltages. The...
sketches over 80kb is not working on my atmega1284p(16mhz external, mighty core,bod disabled,standard pinout).if sketch size is reduced to 79kb or less, it works well. but above 80kb it dosent....
Structure changed somehow in the current nigthly builds. In order to work I had to add some files and parameters. My fork is only for my Atmega1284p 16Mhz using avrispmkii...
It would be helpful if the pins_arduino.h files for the standard and bobuino variants had license information added to them(avr-developers already has it). I realize this repository is kind of...
on a arduino nano328p this code worked fine: before setup: uint8_t my_mcusr=MCUSR; in loop: myGLCD.print("my_mcusr= ", LEFT, LINE7); sprintf(r_str, "\"%03d\"", my_mcusr); myGLCD.print(r_str, RIGHT, LINE7); connected with PC in the Arduino...
Tested 'Original Mighty 1284p 8MHz' on 1284p - working.
I lost a day, because I experienced frequent resets on serial reads. This did not occur on the pins of Serial1 only on Serial and EVEN on an empty sketch...