nrf52840-mdk-usb-dongle

nrf52840-mdk-usb-dongle copied to clipboard

Hello! I am trying to get virtual COM port working on the MDK USB dongle in hopes of using this feature in a more involved project to provide debug info....

aeozyalcin

Dongle not entering boot mode after flashin blinky.hex and not detected as serial port as well

1

Dongle not entering boot mode after flashing blinky.hex and not detected as serial port as well nRF52840-MDK USB dongle

bhanuprakash3242

Dongle is zigbee compatible ?

3

Hi I buy this dongle and try to use nRF5 Zigbee SDK I'm able successfully to build and flash examples but when it starts ZigBee part it always freezes I...

faronov

Dongle Upgrade NRF5340

1

This dongle already exists with less bugs, why not sell the upgraded version of it which uses the new chip nrf5340 instead?

adminy

Programming nrf52840

3

Hello I have bought the nrf52840 under enclosure USB I want to program this with the "nrfconnect-setup-3.12.0-ia32.exe" but impossible to access to this peripheral .... I have error message :...

titou4307

ubuntu 22.04 can not transfer the UF2 zip file into the USB drive

3

Ubuntu 22.04 can not transfer the UF2 zip file into the USB drive. after pushing the reset button and connecting it to the USB port, then trying to copy the...

Teymurian

Flashed nRF52840 MDK USB Dongle with RCP firmware, now unable to enter programming mode?

1

I flashed the nRF52840 MDK USB Dongle with a .uf2 RCP firmware according to the recipe found here: https://studiofuga.com/blog/2023-05-19-changing-firmware-of-mdk-usb-dongle/ It seems that the nRF52840 MDK USB Dongle is recognized as...

olavt

Arduino and PlatformIO support

2

Hello, I would like to program the device "nRF52840 MDK USB Dongle" with PlatformIO / Arduino libraries, is there already a solution? Thank you

electro-logic

Using nrf52840 MDK dongle as RCP in openthread border router

4

Just FYI I have made a bit of progress with this, using the dongle on a raspberry pi running the opnthread border router software with the dongle acting as an...

philb32

Hello, I can find the compiled sniffer in the repostiory, but not the source code to build it. Hence my question, how can I build it myself?

marek22k