Mks-Robin-Nano-Marlin2.0-Firmware icon indicating copy to clipboard operation
Mks-Robin-Nano-Marlin2.0-Firmware copied to clipboard

Published 20 hours ago • verified publisher icon makerbase-mks

MKS_WIFI_MODULE + ESP3D

Open iNDeX999 opened this issue 3 years ago • 3 comments

Hi,

i have flashed ESP3D to my MKS WIFI (Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)

NANO V3 / TS35 #define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3 #define TFT_LVGL_UI #define MKS_WIFI_MODULE

ESP3D FW_VERSION "2.1.1.b10" with and without MKS_TFT_FEATURE compiled )

But i cannot connect to the printer in the ESP3D Gui

Did i misse something?

iNDeX999 avatar Jun 25 '21 08:06 iNDeX999

Hi,

i have flashed ESP3D to my MKS WIFI (Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)

NANO V3 / TS35 #define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3 #define TFT_LVGL_UI #define MKS_WIFI_MODULE

ESP3D FW_VERSION "2.1.1.b10" with and without MKS_TFT_FEATURE compiled )

But i cannot connect to the printer in the ESP3D Gui

Did i misse something?

esp 3.0 , not 2.1.1 https://github.com/luc-github/ESP3D/tree/3.0

DvoraNoob avatar Jun 26 '21 18:06 DvoraNoob

Ok, connection works now. But... it´s more or less useless, thx MKS.
How can i use ESP3D as im used to from my fysetc e4. Use an ESP32 and connect it to power +RX/TX from the Wifi socket off the nano v3?

iNDeX999 avatar Jun 28 '21 06:06 iNDeX999

Ok, connection works now. But... it´s more or less useless, thx MKS. How can i use ESP3D as im used to from my fysetc e4. Use an ESP32 and connect it to power +RX/TX from the Wifi socket off the nano v3?

ESP you can only use in web

DvoraNoob avatar Jun 28 '21 12:06 DvoraNoob