MKS-TinyBee

MKS-TinyBee copied to clipboard

Temp error / USB error

1

My Tinybee is not able to show temperature correctly (EXT1,EXT2,BED are usually between 0° and 5° instead of 19°/20°), while when I warm up bed at 60°, I have a...

carlosm180

Error writing sd card using wifi

10

I try to send a file (a g-code) using web ui, but it is not able to write sd card (trying with differents sd card)....transfert is shown completed (100%), but...

carlosm180

Filament Runout Sensor is not working on MKS Tinybee and H43 Display

9

I am using "MKS Tinybee marlin" firmware. I could make everything work except "FILAMENT RUNOUT SENSOR" I pluged the cable to "MT det" Pin. I changed parameter that showed me...

Moditek

Couldn't connect H43 or TS35

3

I couldnt connect or initialize both of these display sets. Of course I will use only one, Do you know any solution?

deadstarcan

No Screens seem to work on my TinyBee :( 2004 12684 - Reprap Discount and Full Graphic)

1

None of these seem to work . All end up sending beeps and then long beep. There is 3 red lights flashing on the controller - not sure if this...

jaymcd

Screen Compatibility queery

7

Hardware wise, Is TinyBee compatible with the MKS TS35-R screen?

MTRatcliffe

128x64 lcd does not work with mks tinybee

2

Hi 128x64 reprap discount smart controller does not work with mks tinybee I think maybe the boards have issue https://user-images.githubusercontent.com/75531691/182786655-e797d8af-61bb-47b1-9b85-4e915036bab4.mp4 [config.zip](https://github.com/makerbase-mks/MKS-TinyBee/files/9257479/config.zip)

Enzo-Enz

My board is flashing three red lights . I can't find any info on this .....????

jaymcd

Not working OLED ssd1306 display

1

Connect display ssd1306 Tiny oled. Activated in marlin #define U8GLIB_SSD1306 Nothing happens. Display connected GND -> EXP1_9 VCC -> EXP1_10 SCK -> EXP1_04 SDA -> EXP1_06 I'm try to set...

Maksimius

BABYSTEPPING cause crash

12

problem when I use Marlin's Baby stepping that crash the board panic error

jaeuwi74