MKS-TFT
MKS-TFT copied to clipboard
makerbase-mks
PROBLEM WITH MKS GEN L V2.1 WITH MKS TFT35 wifi
Hello, I managed to put up this sistem on a Tevo Tarantula with the latest firmware on the github...
I have some problems at printing, becouse it stops when I click on the Gcode file, with a Continue Button that does nothing, also the calibration button doesn't becouse when I enter the calib mode just freeze and don't stop the calibration process... PLEASE HELP ME, I PUT YOU HERE WHAT CONFIG I USE. THANK YOU
mks gen l v2.1 marlin that i used
Marlin.zip
tft35 firmware and setting used
TFT35_V1.0.7 Release file.zip
first photo of the tft is when I printed over usb, print blocked after few min of print... if I click confirm after some seconds a new error with a new line appear.
@onionboy69 I also faced the same 'Confirm' issue when I updated the latest firmware for TFT 35. I contact MKS, they updated the mkstft35.bin and send it to me.
you can unzip this file and update in TFT. It will solve the problem of 'Confirm' issues
hello, I updated the TFT, same problem, I think I might have someting in the marlin wrong. this problem gives me a headache, I tried various methods, only one time the tft worked and the nozzle and bed didn't read temp. but like a bigginer :)) I forgot what thing in the code I changed... this is usless.. anyways thannks for the suport @selvakumaran2016 any help someone?
@onionboy69 Download the above mkstft35.zip. Then extract it, it will come as mkstft35.bin. Copy and replace this file into the TFT firmware folder.
Delete all the contents from SD card. Copy the above TFT Firmware in the SD Card.
Insert the SD card into TFT and switch on the machine.
It will install the new firmware. The above 'Confirm' problem will be solved