MKS-Robin-Nano-V3.X icon indicating copy to clipboard operation
MKS-Robin-Nano-V3.X copied to clipboard

Published 20 hours ago • verified publisher icon makerbase-mks

Robin nano v3.1 BL Touch failure

Open Barackazarc opened this issue 2 years ago • 2 comments

Hello!

I have an issue with this board and antclab bl touch 3.1 (https://www.antclabs.com/bltouch-v3).

When I try to plug it in and power up the board, the BL Touch literally does nothing. I have checked and the wire that is okay. I have meassured it in multimeter. Basically when powering on the board the BL Touch does not test itself. Nothing happening.

Any idea how to solve this? I thought it is much easier but it seems I'm having hard time to use this.

Also forgot to mention that I'm running klipper on that board.

Thanks in advance.

Barackazarc avatar Apr 28 '22 09:04 Barackazarc

The sensor will self-test when it is powered on. It does not self-test. You can contact the seller of the sensor. There should be a problem with the sensor.

MKS-hosiey avatar Apr 30 '22 01:04 MKS-hosiey

Verify your wiring connections. This will usually happen if the wires are not connected in the correct order. ALso, what pins are you connecting to?

mdunfee3016 avatar Jul 26 '22 17:07 mdunfee3016