MKS-Monster8

MKS-Monster8 copied to clipboard

Can you mount the onboard Monster8 MicroSD via the USB-C interface in Marlin?

1

I'm running a recent version of Marlin on a MKS SGEN_L V2.0, it will mount the onboard MicroSD via the USB interface. This makes it easy to update the firmware...

rondlh

klipper 更新后报错

2

mcu 'mcu': Command format mismatch: config is_config=%c crc=%u is_shutdown=%c move_count=%hu vs config is_config=%c crc=%u move_count=%hu is_shutdown=%c This type of error is frequently caused by running an older version of the...

dflstone

RRF port support?

4

Goid board with good mcu, but im not find RRF firmware for this

whoim2

V2 board starts burning when attempting dfu mode

6

My monster8 v2 starts burning on the marked piece after holding the boot button while the board is off and turning it on with the button pressed. I'm trying to...

boannarrow

[Error.txt](https://github.com/makerbase-mks/MKS-Monster8/files/14499569/Error.txt) [Configuration.txt](https://github.com/makerbase-mks/MKS-Monster8/files/14499582/Configuration.txt) [Configuration adv.txt](https://github.com/makerbase-mks/MKS-Monster8/files/14499614/Configuration.adv.txt) Hi I need help I simply do not see a place where is error. I am making dual Z DIY printer. Can anybody check where is...

Startbh

Using MKS TFT35 display in MKS Monster8 V2

5

I've been looking for the last few days how to use a MKS TFT35 touch screen display on the MKS Monster8 board without success. I finally figured out how to...

marcoslajovic

Sensorless homing for x & y

1

I have TMC2209 on uart mode for x & y drive. Do I need 3,3V or 5V on drive ic- pwr jumper to use sensorless homing? I'm using klipper.

kvng1

Hi, I'm building a new machine and I having a little bit of a problem with the Monster 8 + TMC2160 drivers. I'm using lastes Marlin version 2.1.2.1. I got...

AlvaroRey

想使用uart连接，不使用usb 

windy0220

mks robin wifi on monster 8

2

failed to make mks robin wifi to work with mks monster 8 failed to make MKS TS35 V2 to work in TFT_LVGL_UI mode need manual / instructions / ideas I...

mozg4D