MKS-DLC32
MKS-DLC32 copied to clipboard
makerbase-mks
CUSTOMIZE IMAGE MKS TFT35
Is it possible to change the start screen to a personalized one, as it was possible to do in the MKS TFT35?
Yes, of course, if MKS (in quotation marks) would release the source code. But I think you can only wait for years. That is your business
They have released some firmware. I see some display configs but didnt see the TFT35 https://github.com/makerbase-mks/MKS-DLC32-FIRMWARE
thank you, I've already edited the image, how do I reassemble in the fil bin?Inviato dal mio Galaxy -------- Messaggio originale --------Da: Mungbeanz @.> Data: 15/11/22 04:08 (GMT+01:00) A: makerbase-mks/MKS-DLC32 @.> Cc: PaoloViper74 @.>, Author @.> Oggetto: Re: [makerbase-mks/MKS-DLC32] CUSTOMIZE IMAGE MKS TFT35 (Issue #298) They have released some firmware. I see some display configs but didnt see the TFT35 https://github.com/makerbase-mks/MKS-DLC32-FIRMWARE
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
Sorry have not looked deeply into this. I noticed .ino files. Cant you compile with arduino ide and extract bin from your appdata folder or flash directly?
i managed to create the .bin file but besides being half the original size it doesn't work
I have compiled the firmware, with no errors. TFT35, but the same happen. Half the size, uploaded the firmware to the board and besides LED blinking, no image on TFT, and no response after from the board. Good news, using an already compiled firmware board come back alive
For compiling you have to use VScode , but the source data contains many errors , old version.Br Paolo Inviato dal mio Galaxy -------- Messaggio originale --------Da: Medina-ui @.> Data: 29/11/22 23:41 (GMT+01:00) A: makerbase-mks/MKS-DLC32 @.> Cc: PaoloViper74 @.>, Author @.> Oggetto: Re: [makerbase-mks/MKS-DLC32] CUSTOMIZE IMAGE MKS TFT35 (Issue #298) I have compiled the firmware, with no errors. TFT35, but the same happen. Half the size, uploaded the firmware to the board and besides LED blinking, no image on TFT, and no response after from the board. Good news, using an already compiled firmware board come back alive
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
try to upload it using platform.io directly (the little upload error next to the build button) make sure to set your comport in mksdlc32.ini it uploaded for me as long as I didnt touch it. I convert a jpg to a c file replaced mks_logo.c with the one I had and got an error. If somebody has the steps how to change the logo out I will see if I can figure out how to "burn" it into the board
There is a very simple way and that each of us can change very simply. Soon I will insert a guide to replace the personalized start screen.
GO HERE: https://github.com/makerbase-mks/MKS-DLC32/issues/390
