MKS-DLC

MKS-DLC copied to clipboard

Z probe

3

Hello everyone. which pin is responsible for the Z probe on the MKS-DLC board. I didn't find pin A5

SlavaKot

Problem with DLC V2.1 board and TFT32

1

I flashed the TFT32 with the "laser" option. I connected it to my DLC V 2.1 board as per the instructions. My stepper motors do not move and the laser...

cgmllr100

Endstops on v2.1

3

Hi I have a laser with a mks dlc v2.0 on grbl 1.1h, I have x ,y endstops perfectly working. I wanted to build the same setup for a friend,...

RemyBaligant

Extended Pins

6

Please explain the usage the Extended Pins or Reserved Pins Is that the same as all the ATMEGA328P boards ? A5 : Probe A2 : Start A1 : Stop RST...

sarhadi

[HELP] The result is distorded

2

Hi Everybody, I'm Nathan, an automatician and I'm here to get help on a problem with a custom laser engraver. I built a laser engraver to make customized 3 by...

Nalofox

How do i set up corexy?

1

Hello, I have a Mks dlc 2.0 board, I have been looking into turning my machine into a core xy laser and wasn't sure where I need to define the...

zoidbergwastaken

CoreXY - Dual Endstop

2

Hello Guys, I am currently building a laser engraver, two Y-Steppers and one X-Stepper. What do I have to change in the firmware so that I can use the Auto...

svenboeer

hi, i'm trying to add a servo to go "down and up" (Z) axis to a cnc to make it multipurpose láser and drawing_pen. and I don't know how to...

JulioIS

laser 3 pins

18

how to wire a 3 pins laser .

danyal-hmeedan

Servo pin not workin.

5

The A5 input is not working with a servo (SG90) Cant make writing machine

Damnned