make-all
Request support for Loratap sc400w eu(reopen with id)
Log message
Регистратор: custom_components.tuya_local.config_flow
Источник: custom_components/tuya_local/config_flow.py:434
интеграция: Tuya Local (документация, проблемы)
Зафиксировано первый раз: 20:57:05 (1 случай)
Зафиксировано последний раз: 20:57:05
Include the previous log messages with any new device request to https://github.com/make-all/tuya-local/issues/
Регистратор: custom_components.tuya_local.config_flow
Источник: custom_components/tuya_local/config_flow.py:428
интеграция: Tuya Local (документация, проблемы)
Зафиксировано первый раз: 20:57:05 (1 случай)
Зафиксировано последний раз: 20:57:05
Device matches hircr_remote_control with quality of 100%. DPS: {"updated_at": 1750355821.3361318, "1": "stop", "8": "forward", "10": 22}
Регистратор: custom_components.tuya_local.config_flow
Источник: custom_components/tuya_local/config_flow.py:422
интеграция: Tuya Local (документация, проблемы)
Зафиксировано первый раз: 20:57:05 (1 случай)
Зафиксировано последний раз: 20:57:05
Cloud device spec: [{"id": 1, "name": "control", "type": "Enum", "format": "{\"range\":[\"open\",\"stop\",\"close\"]}", "enumMap": {}}, {"id": 8, "name": "control_back", "type": "Enum", "format": "{\"range\":[\"forward\",\"back\"]}", "enumMap": {}}, {"id": 10, "name": "tr_timecon", "type": "Integer", "format": "{\"unit\":\"s\",\"min\":1,\"max\":120,\"scale\":0,\"step\":1}", "enumMap": {}}]
Product ID
cqcew2xvoqjdaixe
Product Name
LORATAP SC400W EU V5
DPS information
{
"result": {
"category": "clkg",
"functions": [
{
"code": "control",
"desc": "{\"range\":[\"open\",\"stop\",\"close\"]}",
"name": "设备控制",
"type": "Enum",
"values": "{\"range\":[\"open\",\"stop\",\"close\"]}"
},
{
"code": "control_back_mode",
"desc": "{\"range\":[\"forward\",\"back\"]}",
"name": "电机反转模式",
"type": "Enum",
"values": "{\"range\":[\"forward\",\"back\"]}"
},
{
"code": "tr_timecon",
"desc": "{\"unit\":\"s\",\"min\":1,\"max\":120,\"scale\":0,\"step\":1}",
"name": "行程时间配置",
"type": "Integer",
"values": "{\"unit\":\"s\",\"min\":1,\"max\":120,\"scale\":0,\"step\":1}"
}
],
"status": [
{
"code": "control",
"name": "设备控制",
"type": "Enum",
"values": "{\"range\":[\"open\",\"stop\",\"close\"]}"
},
{
"code": "control_back_mode",
"name": "电机反转模式",
"type": "Enum",
"values": "{\"range\":[\"forward\",\"back\"]}"
},
{
"code": "tr_timecon",
"name": "行程时间配置",
"type": "Integer",
"values": "{\"unit\":\"s\",\"min\":1,\"max\":120,\"scale\":0,\"step\":1}"
}
]
},
"success": true,
"t": 1750169341210,
"tid": "9e3cf59f4b8411f0b492d6238a027bdd"
}
Information about how the device functions
Good eveningand today! (same text with previous witout id)
I have this curtain switch but not working set position or to see position,my example is opening curtain full 22sec,now it working only Up down stop and unknown position, tried this setting from up hircr_remote_control but not working, working with curtain switch (not v2) from your integration,before, the position was possible to open to set position in local tuya.
Good evening! I see now your history about ZB version (log from here) this is wifi version of curtain switch,not zigbee, If you need i give and photo with full version description model of curtain from curtain board
