majuss

Yes it's not booting. It's also my guess. I'am using a generic WEMOS type board.

Yes ESPHome for example works. Blue LED is lit up constanly. Do I need connected hardware (in my case wiegand) while booting? Now I'am getting an endless loop of gibberish...

Update on my side. I flashed with address 0x00000 like in the flash.bat and now it worked fine! Maybe include a flashing example in the README. Is there a way...

   So I figured that the configuration of the virtual switch (with the VLAN ID 7) is somewhat the problem. But I'am not experienced enough...

So this is the output of `ifconfig` on a original FW easybox. I think with that information someone could reconstruct the Switch settings for openWRT. What is also wierd: The...

How did you manage to login?! I tried every combination with and without # etc. it never worked... Could you implement the new modem firmware to your openWRT release?

I tried the latest image, but no luck. Still 20 mbit and the version is very buggy. Always crashes when you try edit the config. Still couldn't log into my...

I tried the latest version from 4th of july but no luck, can't log the ppoe in. I cant add a new VLAN id, when I click the add button...

Thanks for the help with the VLAN setup! I finally got everything working also with 100 Mbit, connection was stable for 6 minutes, intense download, tomorrow I will test it...

So after some intense testing I can say that it works, but you're not able to get 100 Mbit only ~76 Mbit/s. The `sirq` and `ksoftirqd` are then eating 100...