ha-emporia-vue
ha-emporia-vue copied to clipboard
magico13
Possible to turn on any of the sensors for realtime updates?
I have a single circuit that I would like to get near realtime data for. My range hood has a remote control that I have automated with Hassio, but the current state of the hood is not queryable. Luckily the hood is on an emporia dedicated circuit - so in theory I could get the state of the hood if I could read the data on that circuit in near-realtime.
The app allows me to see such information - is there a local path to do this without running thru cloud? and if not any way to add more frequent polling for a subset of sensors. Happy to draft a PR to work on this - if its technically feasible.
Sadly there's no local access and Emporia has specifically requested that we don't poll more than once a minute. I can't stop you from modifying the code to poll the one-second scale, but they have threatened to cut off third party access to the API if too many people do it.
You would think they'd prefer we pull locally so we don't have to hammer their servers with requests.
You can open device and flash esp32 onto it - only way to bypass original firmware to get real time data
From: Adam James West @.> Sent: Sunday, September 14, 2025 6:47:23 AM To: magico13/ha-emporia-vue @.> Cc: Eli Schleifer @.>; Author @.> Subject: Re: [magico13/ha-emporia-vue] Possible to turn on any of the sensors for realtime updates? (Issue #338)
[https://avatars.githubusercontent.com/u/529833?s=20&v=4]IntegersOfK left a comment (magico13/ha-emporia-vue#338)https://github.com/magico13/ha-emporia-vue/issues/338#issuecomment-3289560267
You would think they'd prefer we pull locally so we don't have to hammer their servers with requests.
— Reply to this email directly, view it on GitHubhttps://github.com/magico13/ha-emporia-vue/issues/338#issuecomment-3289560267, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AAJVCPU6Z26EQZFFJ7MVM433SVWWXAVCNFSM6AAAAACGPBJKDSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTEOBZGU3DAMRWG4. You are receiving this because you authored the thread.Message ID: @.***>