Mike Marvin

Try rebooting and the devices should show up then. Device setup happens during initialization.

The backing unique id is set by the device id and the channel id, which are pretty fixed by the hardware so the good news is that it should remap...

Odd. Could just be an API issue but could be a symptom of something more. Try reloading the integration to see if that fixes it, since that will cause it...

That's very odd. When you readd the integration and it asks for your credentials, there are checkboxes for the different scales. If you uncheck one, eg Month, then it will...

That is operating as intended. Add the Daily sensors, which are updated every minute, to the energy dashboard. The energy dashboard only breaks things down by hour.

What version of the integration are you running? There was briefly a v0.10.2pre that has a number of issues that wasn't intended to be installed widespread (but HACS was still...

Power Minute Average is the same one minute data as before. It is the average power over a minute, same as selecting the 1 minute level on the home screen...

That happens most often if the Home Assistant server's time zone does not match the time zone set for the devices in the Emporia app. If you look at the...

It's not an issue if it happens during startup and you're seeing whatever is logged still showing up as a device, in this case only the Balance sensor. Balance and...

Unfortunately no, I'll have to change it to an info level message for it to go away, sorry.