Mike Marvin

@krazos the template sensor might be state_class `total` and the `last_reset` time isn't being set so it's all one "cycle". If that value only goes up until it resets you...

Logs should be at https://{home-assistant-url}:8123/config/logs, or under Settings -> System -> Logs. I recommend scrolling down to the bottom and loading the full logs, then look around midnight this morning...

I had issues with making these `total_increasing` due to the API giving occasional bad values or some overall energy sensors being legitimately non-monotonic so that's why they all swapped to...

The message looks like I would expect. Can you tell me what you have the time zone set to in both Home Assistant and in the Emporia settings? Here's both...

Another thing to check would be the state data in the Developer Tools in Home Assistant. When I pull up my home_1,2,3_1d sensor it looks like this. The `state_class` should...

Odd, did you somehow set it up twice? How many Vues do you have? I'm not sure how it would double, the device gid is unique for an individual device...

Unfortunately this is a pretty common issue with their API and there's not much I can do about it. I've already got retry logic but sometimes they just give back...

I'd also recommend the pre-release version which has better handling for reauthentication. I'm hoping to release that as a main release this weekend.

Odd, I'm not sure what would be different after it's been running for a while. The only tokens in play are automatically refreshed because they expire after an hour, so...

I'm not sure if anything would be logged but if there's any errors logged when you see this happen again definitely let me know. I'll try to keep an eye...