lora_pkt_fwd not starting with European configuration

[davidrib]

After resolving the commas issue, that is the result :

pi@RK01:~/sx1302_hal/bin $ ./lora_pkt_fwd *** Packet Forwarder *** Version: 1.0.5 *** SX1302 HAL library version info *** Version: 1.0.5;

---

INFO: Little endian host INFO: found configuration file global_conf.json, parsing it INFO: global_conf.json does contain a JSON object named SX130x_conf, parsing SX1302 parameters INFO: spidev_path /dev/spidev0.0, lorawan_public 1, clksrc 0, full_duplex 0 INFO: antenna_gain 0 dBi INFO: Configuring legacy timestamp INFO: Configuring Tx Gain LUT for rf_chain 0 with 16 indexes for sx1250 INFO: radio 0 enabled (type SX1250), center frequency 867500000, RSSI offset -215.399994, tx enabled 1, single input mode 0 INFO: radio 1 enabled (type SX1250), center frequency 868500000, RSSI offset -215.399994, tx enabled 0, single input mode 0 INFO: Lora multi-SF channel 0> radio 1, IF -400000 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora multi-SF channel 1> radio 1, IF -200000 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora multi-SF channel 2> radio 1, IF 0 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora multi-SF channel 3> radio 0, IF -400000 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora multi-SF channel 4> radio 0, IF -200000 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora multi-SF channel 5> radio 0, IF 0 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora multi-SF channel 6> radio 0, IF 200000 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora multi-SF channel 7> radio 0, IF 400000 Hz, 125 kHz bw, SF 5 to 12 INFO: Lora std channel> radio 1, IF -200000 Hz, 250000 Hz bw, SF 7, Explicit header INFO: FSK channel> radio 1, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate INFO: global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters INFO: gateway MAC address is configured to AA555A0000000000 INFO: server hostname or IP address is configured to "localhost" INFO: upstream port is configured to "1680" INFO: downstream port is configured to "1680" INFO: downstream keep-alive interval is configured to 10 seconds INFO: statistics display interval is configured to 30 seconds INFO: upstream PUSH_DATA time-out is configured to 100 ms INFO: packets received with a valid CRC will be forwarded INFO: packets received with a CRC error will NOT be forwarded INFO: packets received with no CRC will NOT be forwarded INFO: global_conf.json does not contain a JSON object named debug_conf INFO: no debug configuration CoreCell reset through GPIO17... CoreCell power enable through GPIO2... ERROR: [main] failed to start the concentrator

Can't find a solution :(

Help appreciated

Note: the module works nicely in the things network and the official configuration from Helium, not this one.

[maco2035]

Did you get this working?

[sajin-parsedata]

Hi, Did you find a way to fix this? I am getting the same issue.

[Airrwalkk]

This is still an Issue I am facing atm. Need help on this. Can I use another conf for EU?

Fast help would be appreciated. Will tip.

Edit: tried out other confs im regionally in EU they all trigger the same error as stated above

[...] INFO: no debug configuration CoreCell reset through GPIO17... CoreCell power enable through GPIO2... ERROR: [main] failed to start the concentrator

added you on disc