Issue booting, "open: no such file or directory"

[cbarratt]

(default) Generate UUID...
(default) DBG | Generated UUID: ACB20647-A8F7-45E4-8F52-3B30068D4F62
(default) Convert UUID to MAC address...
open : no such file or directory
notifying bugsnag: [Error in driver during machine creation: exit status 2]
Error creating machine: Error in driver during machine creation: exit status 2

I think it may be related to the fact I emptied /var/db/dhcpd_leases

The file exists but now has no content.

The docs confused me a little :( I did this because when I rebooted my machine, it wouldn't start xhyve - it would just hang and the process would exit/timeout

[zchee]

@cbarratt Thanks issue :)

Ah, good catch. I have not yet tested, but there is that possibility. and, did not error handling of this points. sorry.

I will debug and fix later!

[zchee]

@cbarratt and, I do not yet implement the functions of the cleaning of vmnet. https://github.com/zchee/docker-machine-driver-xhyve#does-not-clean-up-the-vmnet-when-remove-a-vm

Because that could be the cleaning of vmnet by editing the /var/db/dhcpd_leases and plist, I'll proceed with it after resolved this issue.

[cbarratt]

@zchee No problem - is there any work around that I can do now on my machine to try and get it to boot?

[zchee]

@cbarratt OK.

I want to re-check the current of your situation and environment.

1. Exists doubtless /var/db/dhcpd_leases file, but it is empty?
2. Result of sw_vers command
3. Result of system_profiler SPHardwareDataType
   • but DO NOT POST Serial Number and Hardware UUID
   • That is very sensitive data
4. Original xhyve with -s 2:0,virtio-net flag be fully working?

[cbarratt]

@zchee Here are the results:

1. Correct, file exists but is empty.
2. ProductName: Mac OS X ProductVersion: 10.11.4 BuildVersion: 15E27e
3. Hardware: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro11,4 Processor Name: Intel Core i7 Processor Speed: 2.2 GHz Number of Processors: 1 Total Number of Cores: 4 L2 Cache (per Core): 256 KB L3 Cache: 6 MB Memory: 16 GB Boot ROM Version: MBP114.0172.B07 SMC Version (system): 2.29f24 Serial Number (system): XXXXXXXXXXXXX Hardware UUID: XXXXXXXXXXXXX
4. Just figuring out how to do this one, reading xhyve documentation

[cbarratt]

~/projects/xhyve $ sudo build/xhyve -A -m 4G -c 4 -s 0:0,hostbridge -s 31,lpc -l com1,stdio -s 2:1,virtio-net -f "kexec,test/vmlinuz,test/initrd.gz,earlyprintk=serial console=ttyS0"
Password:
hv_vm_create failed

[zchee]

@cbarratt

Just figuring out how to do this one, reading xhyve documentation

i.g., run original xhyve with vmnet shared network.

$ git clone https://github.com/mist64/xhyve
$ cd xhyve
$ make
$ cp ./build/xhyve /usr/local/bin/xhyve
# booting tinycorelinux...
$ sudo build/xhyve -A -m 4G -c 4 -s 0:0,hostbridge -s 31,lpc -l com1,stdio -s 2:1,virtio-net -f "kexec,test/vmlinuz,test/initrd.gz,earlyprintk=serial console=ttyS0"
# in the tinycorelinux
$ ifconfig
$ ping google.com
$ sudo halt

[cbarratt]

Fails to boot :-1:

hv_vm_create failed

[zchee]

@cbarratt Hmm... The cause of this issue does not seem to be a docker-machine-driver-xhyve.

Do you have disabled the SIP (System Integrity Protection)?

sudo csrutil status

[cbarratt]

SIP is enabled, I had xhyve and the docker-machine driver working perfectly ok yesterday, after rebooting my machine today and trying to start the machine back up it failed, so then i deleted it and re-created and have been unsuccessful so far :(

I can try disable SIP and see if that helps?

[zchee]

@cbarratt Oh, I checked now, I also was enable SIP :(

Anyway, if the original xhyve does not start, strange something in your environment. I will cooperate in the improvement as much as possible, please feel free to comment.

[zchee]

@cbarratt Sorry, I'm not good at English.

I can try disable SIP and see if that helps?

Do you not know how to disable the SIP?

[cbarratt]

I was saying I could try run xhyve with SIP disabled, but as you said it is enabled for you also. I'm attempting to debug xhyve still.

It must be related to my vmnet

[zchee]

@cbarratt I understand. Thanks.

I also debug xhyve now. hv_vm_create is src/vmm/intel/vmx.c +467. Why this error handle is executed... :(

[zchee]

@cbarratt FYI, I and your difference is this points.

ProductName:    Mac OS X
ProductVersion: 10.11.3 # Not beta
BuildVersion:   15D13b

Did you update OS yesterday?

[cbarratt]

@zchee - I have only just recently updated today.

I updated after docker xhyve was already broken, I don't believe the beta has broken it. I think it was my own fault for amending the vmnet file

[zchee]

@cbarratt I was updated to 15E27e(beta) by mistake yesterday :scream_cat: It could not also be started.

This would be a apple's bug.

[zchee]

@cbarratt I have prepared a bootable install OS X USB, and forcible downgrade. (Not delete HDD, overwrite install) Improved, but it is not recommended.