m5-docs
m5-docs copied to clipboard
m5stack
Which pins can be used?
Hi, at the moment this is really quite difficult to figure out. There were people on the forums having trouble too. I think it would be useful if there was a straightforward list of all the exposed pins, stating for each pin whether it can be used freely, or whether there is something to watch out for.
For example, looking at the Basic,
In core/basic.md:
- 18,19,23 are SPI shared with the LCD and TF card (can they be used for additional SPI?)
- 25 is connected to the speaker
- 21,22 are I2C connected to the GROVE port (can they be used as GPIO if not using GROVE?)
ESP32 info:
- 0,1,3,12 have something to do with the boot sequence
- 35,36 are input-only without pullups
In the schematic:
- 1,3 are connected to the CP2104 USB serial
- ???
Trial and error:
- I tried to use 2 as an output, it didn't seem to work, but I couldn't find any info about it.
api/gpio.md gives some info about what the different pins are for, but doesn't answer this question. For example, it labels 1,3,16,17 as "UART", but as far as I can tell 16,17 are available for GPIO while 1,3 are not.
The ESP32 chip has the below list of pins exposed from the MCU. Per the product page for the M5Stack Basic, additional functions have been listed to the specified pins. Further details on functionality and mapping in the ESP32 available in the datasheet. Many functions can be mapped to any available pin by setting it in your code (e.g: using 3&1, 2&5, or 16&17 for a secondary I2C port)
https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf
GP0 = Pin(0) GP1 = Pin(1) # TXD1, I/O/T (Input/Output/Touch sensor) GP2 = Pin(2) # GPIO, ADC2_CH2/T2, I/O/T GP3 = Pin(3) # RXD1, I/O/T GP4 = Pin(4) # CS TF Card GP5 = Pin(5) # GPIO, I/O/T GP6 = Pin(6) GP7 = Pin(7) GP8 = Pin(8) GP9 = Pin(9) GP10 = Pin(10) GP11 = Pin(11) GP12 = Pin(12) # IIS_SK, ADC2_CH5, I/O/T GP13 = Pin(13) # IIS_WS, ADC2_CH4/T4, I/O/T GP14 = Pin(14) # CS GP15 = Pin(15) # IIS_OUT, ADC2_CH3/T3, I/O/T GP16 = Pin(16) # RXD2, I/O/T, I/O/T GP17 = Pin(17) # TXD2, I/O/T GP18 = Pin(18) # ILI9342C LCD CLK, SCK, I/O/T GP19 = Pin(19) # MISO TF Card, MISO, I/O/T GP21 = Pin(21) # SDA, Grove Port-A (Red), IPS306 charging/discharging circuit GP22 = Pin(22) # SCL, Grove Port-A (Red), IPS306 charging/discharging circuit GP23 = Pin(23) # MOSI TF Card, ILI9342C LCD MOSI/MISO, MOSI, I/O/T GP25 = Pin(25) # DAC Pin, connected to speaker, DAC_1, ADC2_CH8, I/O/T GP26 = Pin(26) # Grove Port-B (Black), DAC/ADC, DAC_2, ADC2_CH9, I/O/T GP27 = Pin(27) # ILI9342C LCD DC GP32 = Pin(32) # ILI9342C LCD BL GP33 = Pin(33) # ILI9342C LDC RST GP34 = Pin(34) # IIS_IN, ADC1_CH6, I GP35 = Pin(35) # ADC, ADC1_CH7, I GP36 = Pin(36) # Grove Port-B (Black), DAC/ADC, I GP37 = Pin(37) # Button C GP38 = Pin(38) # Button B GP39 = Pin(39) # Button A
