lzhoang2801
macOS Sequoia & Tahoe crash during boot after ACPI initialization
Description: When booting macOS Sequoia or Tahoe with OpenCore, the system hangs for a few seconds right after the line:
ACPI: sleep states S3 S4 S5
At this point, the USB stick LED turns off and then the system crashes. The same issue occurs with both macOS Sequoia and Tahoe. USB mapping has been completed correctly.
System information:
CPU: AMD Ryzen 7 5700X3D (8-Core, AM4)
GPU: AMD Radeon RX 6750 XT
Connected Monitors: Acer XB323QK NV (DP), BenQ EX2710U (DP)
Audio:
RØDE XDM-100
SteelSeries Arctis Nova 5X Wireless
High Definition Audio Device
AMD High Definition Audio Device (via DisplayPort)
Network: Intel Ethernet Controller I225-V
Storage:
500 Series Chipset SATA Controller
NVMe SSD Controller SM981/PM981/PM983
OpenCore setup:
OpenCore version: 1.0.3
ACPI: SSDT-EC, SSDT-PLUG, SSDT-AWAC, SSDT-USBX
Kernel: AMD Vanilla patches
USB mapping: done with USBToolBox and UTBMap.kext
SecureBootModel: Disabled
SIP: Disabled
CFG Lock: Disabled
Fast Boot: Disabled
SMBIOS: MacPro7,1
Steps to reproduce:
Boot macOS Sequoia or Tahoe installer via OpenCore.
Wait for the system to reach the line ACPI: sleep states S3 S4 S5.
The USB stick LED turns off and the system crashes after a few seconds.
Expected behavior: System should continue the boot process and reach the installer screen.
Actual behavior: System freezes for a few seconds after ACPI: sleep states S3 S4 S5, USB power cuts off, then it crashes with no panic log or further output.
