lynchaj

Hi Yes, those are known issues and not the clearance violations I am concerned about. Both H3 and H4 are padless holes for routing wires between front and back of...

Hi, I have since fixed the padless hole problem by replacing H3 and H4 with holes with pads so that problem is solved.  The issue is when I load a...

Thank you! I think this looks like some sort of rounding issue or maybe a type conversion issue. Can you replicate this phenomenon using 64-bit KiCAD and/or FreeRouting? I wonder...

Hi Personally, I think this issue has been around for a long time. I've been using KiCAD and FreeRouting since 2006 and this has been a recurring problem as long...

Hi Andras, Thank you so much! I think this would be a great fix to KiCAD and FreeRouting. Even if it takes a while, at least it is acknowledged as...

Hi, Will do and report back later, hopefully today Thanks! Much appreciated, Andrew Lynch

Hi I am afraid the problem is still there. I went through the cycle of saving the .SES file from FreeRouting and then importing into KiCAD and then exporting the...

[processor-Z80-test.zip](https://github.com/freerouting/freerouting/files/11486997/processor-Z80-test.zip) This is my test .DSN file

Hi One additional thing I've noticed with this board is that if it runs in the FreeRouting trace optimizer for an extended period of time like 1 week or more...

Hi Was there ever a root cause identified for the clearance violations seen in export of .DSN, FreeRouting, export of .SES, and import of .SES into KiCAD, and re-export of...