rtl8852au
rtl8852au copied to clipboard
Reduced speed USB-AX56
Hi,
Thanks for providing this driver.. No issues with installing, all went according to the instructions. However, I'm facing a reduced speed. Won't call it slow, as I max. at 250 mbit/s down. However, this is far behind my other wifi adapter (+-800 mbits, same location, non wifi =6).
wlx04421a5f8d5b IEEE 802.11AX ESSID:"***" Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency:5.54 GHz Access Point: 44:05:3F:94:BD:F8
Bit Rate:1.201 Gb/s Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality=74/100 Signal level=74/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0`
$ iw dev wlx04421a5f8d5b info
Interface wlx04421a5f8d5b
ifindex 6
wdev 0x300000001
addr 04:42:1a:5f:8d:5b
ssid *****
type managed
wiphy 3
channel 108 (5540 MHz), width: 80 MHz, center1: 5530 MHz
txpower 12.00 dBm
What I can see is the txpower (12.00 dBm) is less then my other adapter (22.00 dBm). However increasing the txpower didn't succeed using:
iw dev wlx04421a5f8d5b set txpower fixed 2000
Are there any (other) driver settings I can tweak, to increase the speed of my connection?