Andrew Scheller

Default boot partition specified in recovery.cmdline never gets used

5

While investigating #150 I found that if you have more than one OS installed, and you haven't yet booted any of the OSes (i.e. the countdown-timer doesn't activate on the...

Already-installed OSes appear to be re-installable from Network even with no Ethernet connection

3

Not sure if this is worth fixing, but figured I might as well report it anyway... It really only affects NOOBS Lite. Consider the following scenario: 1. User writes NOOBS...

Leave the "Edit config" button disabled for the Data Partition

2

As suggested in #166

Logic for choosing default display-mode is slightly wrong

2

Found this while investigating #142 but the issues are definitely different (but _perhaps_ the issue below is an influence on that issue?)... Try this: 1. Load NOOBS v1.3.2 onto a...

See https://github.com/raspberrypi/pico-examples/pull/229#pullrequestreview-1026221316

A ROSC DIV of 0 is okay (and sets DIV = 32) Writing ROSC DIV incorrectly sets BADWRITE, so avoid rosc_write and manually clear the BADWRITE bit

Fix link to VGA-schematic image

3

Seems like the GiHub Markdown renderer doesn't like spaces in filenames?