Andrew Scheller
Andrew Scheller
It's back in 2.1.3 😂 https://github.com/balena-io/etcher/releases/tag/v2.1.3
https://github.com/balena-io/etcher/blob/master/docs/USER-DOCUMENTATION.md#why-is-my-drive-not-bootable
See https://github.com/balena-io/etcher/blob/master/docs/USER-DOCUMENTATION.md#flashing-ubuntu-isos and https://blog.balena.io/did-etcher-break-my-usb-sd-card/
Similar issue to https://github.com/raspberrypi/pico-feedback/issues/440 ?
This problem has already been reported a few times before https://github.com/balena-io/etcher/issues?q=is%3Aissue+is%3Aopen+gconf2
It's up to the Diet Pi maintainers to request inclusion in https://downloads.raspberrypi.com/os_list_imagingutility_v4.json and there's some Google-form that they have to fill out to do that. I can never remember that...
I don't think Etcher provides ARM Linux builds yet? See #2870 In the meantime you could try using [Raspberry Pi Imager](https://www.raspberrypi.com/documentation/computers/getting-started.html#raspberry-pi-imager) which does much the same thing.
I believe the `--enable-sysfsgpio --enable-bcm2835gpio` options are needed if you're wanting to use the GPIO pins on a Raspberry Pi to debug a Pico (which was the recommended way of...
Also, I see that your forum thread says "if you install it with apt, then you will not get the build that comes from Raspberry pi". For Raspberry Pi OS,...
> Tried to use Imager to flash the Pi OS Lite (64-bit) to a 2.0 GB card and was told it needs to be 6.0 GB or greater.. took out...