0.7.36 FW perfect - 0.8.83 FW shows getNtpTime failed

[Philladelph]

My last FW 0.7.36 is running perfect. Older FW versions also always perfect. Tanks !

But when I do an update to the latest 0.8.83 FW it shows no date. The Serial/Control always shows "getNtpTime failed" My FritzBox router is working as NTP Server.

I would like to get the latest and greatest running

FW: 230817_ahoy_0.7.36_ba218ed_esp8266.bin FW: 240217_ahoy_0.8.83_5ebfe5a_esp8266-de.bin

Hardware

• [x] ESP8266
• [ ] ESP32
• [ ] Raspberry Pi

Modelname: HMS-1600-4T Retailer URL: ______

nRF24L01+ Module

• [x] nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
• [ ] square dot indicates original Nordic Semicon chip
• [ ] round dot indicates copy-cat / counterfeit SI labs chip

Antenna:

• [ ] circuit board
• [x] external antenna (SMA) I am happy with Ahoy-DTU.

Power Stabilization:

• [ ] 100uF Electrolytic Capacitor connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
• [ ] Voltage stabilizing motherboard

Version / Git SHA:

Version: ..__ Github Hash: _______

Build & Flash Method:

• [x] AhoyDTU Webinstaller
• [ ] VSCode - Platform IO
• [ ] Arduino
• [ ] ESP Tools

Debugging:

• [ ] USB Serial Log (attached)
• [ ] Setup settings (use our templates ... to be added)

[lumapu]

The it would be may of interest to test our latest development version: https://fw.ahoydtu.de/fw/dev/

[Philladelph]

Now totally struggling Now nothing works anymore, even if I downgrade the firmware to an older version Are the pictures helpful to you or do you need more from me?