display 2.42 pouce

[jacques3629]

Hardware

• [ ok ] ESP32

Modelname: ______ Retailer URL: ______

nRF24L01+ Module

• [ ] nRF24L01+ you verified this is a Plus model capable of the required 256kBit/s mode
• [ ] square dot indicates original Nordic Semicon chip
• [ ] round dot indicates copy-cat / counterfeit SI labs chip

Antenna:

• [ ] circuit board
• [ ] external antenna (SMA)

Power Stabilization:

• [ ] 100uF Electrolytic Capacitor connected between +3.3V and GND (Pin 1 & 2) of the NRF Module
• [ ] Voltage stabilizing motherboard

Version / Git SHA:

Version: ..__ Github Hash: _______

Build & Flash Method:

• [ ] AhoyDTU Webinstaller
• [ ] VSCode - Platform IO
• [ ] Arduino
• [ ] ESP Tools

Debugging:

• [ ] USB Serial Log (attached)
• [ ] Setup settings (use our templates ... to be added)

Good morning

Ahoydtu Works wonderfully HM+HMS

Sorry if this question has already been asked not being very young, I would simply like to display the power in Walt on the 2.42 inch screen au maxi (exit the rest of the information). Is this possible

THANKS

[kiu77]

Not with this software - or only if you modify and compile the software yourself...

[Peertje-62]

Hallo & I am 62, You could try Ahoy 0.8.36 or 0.8.34, https://github.com/lumapu/ahoy/releases has other display information : less Back up or write down the settings before you change the firmware good luck regards

[jacques3629]

Hallo & I am 62, You could try Ahoy 0.8.36 or 0.8.34, https://github.com/lumapu/ahoy/releases has other display information : less Back up or write down the settings before you change the firmware good luck regards

thanks for the information I haven't found anything that allows me to delete information I just want to keep the WATT to be able to view further

Sincerely 08.36

8.95

[lumapu]

What do you mean by "pouce"? The display contents are fixed, so the simple answer is: no As @kiu77 mentioned your only change to do so will be compile your own firmware which simply modifies what is displayed.

[MetaChuh]

@lumapu

pouce is inches in french.

as far as i can understand, this feature request is an accessibility option request (bedienungs und sehhilfen option), to display only the current momentary wattage as large as possible. (example 6191 W at the given example picture, full screen, with no other information on the display)

@jacques3629 thank you for your picture, i love your wooden case.

greetings, metachuh

[jacques3629]

Good morning

@MetaChuh thank you for my little wooden box, it is not expensive at all, made from bamboo on AliExpress, lots of choice bedienungs und sehhilfen option is a good suggestion for the evolution of the software maybe in the future ahyo-dtu will support larger oled displays

@lumapu: create my own firmware, I don't know how to do it, I don't have your talent :)

[MetaChuh]

hi @jacques3629 i'm glad you found how to re-open this accessibility issue.

unfortunately we are currently not familiar enough with the display routines, to provide a quick and optional, customizable setting to only display a specific value as large as possible with our spare time, but we do understand such assisting needs.

@You69Man we're all still amazed by your graph and personal adjustability since day 1 of your initial pull request. if your time and personal interest allows it, could you please have a look at this and share your thoughts ? much appreciated, with no pressure, wishes, or demands.

greetings & hugs metachuh

[jacques3629]

@ MétaChuh, lumapu no worries, continue to do the excellent work I recently discovered home automation I had a lot of fun doing ahyo-dtu, I'm not at all in the programming world, that doesn't stop me from trying to follow your progress and yet I got there thanks to you, also to the forum

Sincerely