rpi-wifi

rpi-wifi copied to clipboard

Dumb question... Can I set ap_ssid ap_password and client_ssid client_password the same? I use case is that I want the clients that are connected to the RPi0W to be able...

chilman408

Support for Raspberry Pi 3

17

Hi there! I forked the repo to make some test with this script. https://github.com/MkLHX/AP_STA_RPI_SAME_WIFI_CHIP I have some troubles on RPI3A who run raspbian buster, when i run the configure.sh script...

MkLHX

1. Line 89. 2. Dhcpd vs dhcpd5

1

I wanted to comment that I got this up and working on a Zero W using a Kali.rp0w.nexmon as the underlying system. It was fairly straightforward, but not easy at...

katzurki

Turn off power management

2

Hi, thanks for this nice script! It works nice on Raspberry Pi Zero wh. It seems to work better with the power management turned off. If someone wants to do...

cyp-git

I have been trying to set-up a wireless access-point on my new Raspberry Pi Zero. I stumbled up this script after reading this guide https://blog.thewalr.us/2017/09/26/raspberry-pi-zero-w-simultaneous-ap-and-managed-mode-wifi/ and decided it would be...

Xopher00

This works great on fresh Raspbian Lite install on PiZeroW. I used a too-short passphrase (

brettbeeson

WLAN0 not connecting to broader internet

1

I tried using this script with the updates @mahesh2000 [mentioned here](https://gist.github.com/lukicdarkoo/6b92d182d37d0a10400060d8344f86e4#gistcomment-3122029) on my Raspberry Pi Zero W, however I'm unable to get wlan0 to connect to the broader internet. My...

xthursdayx

Access the RPI from the WLAN0 not possible

2

Hi, I dont know exactly how this happens but there is a point when it is no longer possible to reach the raspberry thru the WLAN0 ip address when connected...

dop0qob

OpenVPN breaks client mode

1

When installing OpenVPN, the AP persists but the client capabilities disappear. However, if you remove OpenVPN, then the client comes back. Is there any fix for this? --- Want to...

43y3s

Fix hostapd and quote

1

Hello! I'm testing on a raspberry 3 model B+, with DietPI. I found these issues executing the script

kelvingl