lucasromeiro

> I do not know, what changes were done with different releases. But if am older one works I would guess the board autodetection is confused. > > But you...

> There is no clear change history for the commits to trace this back to a code change. > > The chip version should not affect this. Looks also more...

> There is no clear change history for the commits to trace this back to a code change. > > The chip version should not affect this. Looks also more...

> I do not know, what changes were done with different releases. But if am older one works I would guess the board autodetection is confused. > > But you...

> I think, I found the issue with the TINY. > > @lucasromeiro  Please measure resistance between GPIO25 and GND. For the TINY it should be connected to GND...

@Quas7 You understood correctly, there is a resistance of 540 ohm between the GPIO25 pin and GND! But I believe this was an error, I got another new board and...

@112cxyz @Ansem-SoD I have the same problem in my LITE... I already checked everything and didn't find anything wrong. I changed everything and the error continued. any tips on how...

i find this. is the best option? seems too limited: https://github.com/teeminus/NoTouchScreenFirmware

@JoeTodes How did you burn it gave RPI? Do I need to be careful about something? I'm doing your tutorial right now to try to convert my printer and use...

> Oh it was just a silly mistake on my part. I had unplugged the pi to put it in a case that I printed and accidentally plugged the connector...