Guru Meditation Error on TTGO T-Beam v0.7

[dl1mx]

I have a TTGO T-Beam v0.7 with OLED attached. After compiling with VS Code and platformIO (env:ttgo-t-beam-v0_7) I get the following error after upload and monitor:

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13104
load:0x40080400,len:3036
entry 0x400805e4
[INFO][Main] LoRa APRS Tracker by OE5BPA (Peter Buchegger)
[INFO][Main] Version: 22.19.0
[INFO][LoRa] Set SPI pins!
[INFO][LoRa] Set LoRa pins!
[INFO][LoRa] frequency: 433775000
[INFO][LoRa] LoRa init done!
[INFO][Main] Smart Beacon is: On
[INFO][Main] setup done...
[INFO][Loop] GPS fix state went to VALID
Guru Meditation Error: Core  1 panic'ed (LoadProhibited). Exception was unhandled.

Core  1 register dump:
PC      : 0x400d7857  PS      : 0x00060830  A0      : 0x800d7c53  A1      : 0x3ffcc420
A2      : 0x00000000  A3      : 0x00000000  A4      : 0x00000001  A5      : 0x3ffc5d30
A6      : 0x00060823  A7      : 0x00000001  A8      : 0x800863ae  A9      : 0x3ffcc400
A10     : 0x00000001  A11     : 0x00000001  A12     : 0x3ffcc714  A13     : 0x00000000  
A14     : 0x007bf608  A15     : 0x003fffff  SAR     : 0x0000000a  EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000040  LBEG    : 0x40085b9d  LEND    : 0x40085ba5  LCOUNT  : 0x00000027

Backtrace: 0x400d7854:0x3ffcc420 0x400d7c50:0x3ffcc450 0x400d8c90:0x3ffcc470 0x400d8d7a:0x3ffcc490 0x400d728d:0x3ffcc4c0 0x400d3fed:0x3ffcc4e0 0x400e02a1:0x3ffcc680

  #0  0x400d7854:0x3ffcc420 in TwoWire::beginTransmission(unsigned short) at C:/Users/kubon/.platformio/packages/framework-arduinoespressif32/libraries/Wire/src/Wire.cpp:409
  #1  0x400d7c50:0x3ffcc450 in TwoWire::beginTransmission(unsigned char) at C:/Users/kubon/.platformio/packages/framework-arduinoespressif32/libraries/Wire/src/Wire.cpp:637
  #2  0x400d8c90:0x3ffcc470 in AXP20X_Class::_readByte(unsigned char, unsigned char, unsigned char*) at .pio/libdeps/ttgo-t-beam-v0_7/AXP202X_Library/src/axp20x.cpp:2223
      (inlined by) AXP20X_Class::_readByte(unsigned char, unsigned char, unsigned char*) at .pio/libdeps/ttgo-t-beam-v0_7/AXP202X_Library/src/axp20x.cpp:2215
  #3  0x400d8d7a:0x3ffcc490 in AXP20X_Class::setChgLEDMode(axp_chgled_mode_t) at .pio/libdeps/ttgo-t-beam-v0_7/AXP202X_Library/src/axp20x.cpp:1288
  #4  0x400d728d:0x3ffcc4c0 in PowerManagement::enableChgLed() at src/power_management.cpp:54
  #5  0x400d3fed:0x3ffcc4e0 in loop() at src/LoRa_APRS_Tracker.cpp:192
  #6  0x400e02a1:0x3ffcc680 in loopTask(void*) at C:/Users/kubon/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:50

ELF file SHA256: 51f40076d49aec6e

Rebooting...

Seems there is a problem on these boards with activating the charge LED. If comment out line 192 and 194 in LoRa_APRS_Tracker.cpp the unit is working again.

  if (powerManagement.isChargeing()) {
  //  powerManagement.enableChgLed();
  } else {
  //  powerManagement.disableChgLed();
  }

VS Code: 1.75.1 platformIO: 6.1.6/3.4.3 Sourcecode: https://github.com/lora-aprs/LoRa_APRS_Tracker/commit/e9842ea01144ae20d9f8311f226adf97ec0372a5

Best regards, Marco

[jeschofnik]

same here, thx for the hint

73 de phil, oe8jpq