Simon Eisenmann
Simon Eisenmann
@RyanRamchandar - so far i have seen no indication that there is a general issue with my image. I strongly suggest you get a better power supply or a lower...
> I didn't want to think it was a power supply issue either, but when running off a bench power supply (5A, good filtering), my previously 100% repro crash went...
@whongx yes - Ethernet draws quite some power and Gigabit Ethernet even more.
@whongx what does it mean "cannot boot up" ? Do you have logs or at least an error message?
I was able to reproduce a boot-up panic with a specific USB device connected. PR https://github.com/longsleep/linux-pine64/pull/56 seems to fix that. If you can please try if that change also fixes...
Yes - i doubt that the USB change does fix lock-ups which happen later. I will also merge your backport-fsl-errata.patch now after reading up on the issue. But as you...
> I was able to reproduce a boot-up panic with a specific USB device connected. PR longsleep/linux-pine64#56 seems to fix that. If you can please try if that change also...
Btw, on Pinebook with exactly same Kernel - it works just fine every time.
> @longsleep > Are you getting lockups with stack traces similar to posted previously with disp2 HDMI functions in them? @zador-blood-stained - Yes, very similar to pine64-lockup-debug3.txt - it has...
I tested this in detail yesterday. It still can crash exactly like with even when powered at 5.2V via Euler. It never draws more than 400mA during bootup either.