Logan Carlile

I am having the same issue with some sites. It would be nice to be able to give constraints on what symbols are used for password generation.

I am having the same problem. From what I am seeing it might require creating a custom sub driver for the usbhid-ups driver in NUT. [https://networkupstools.org/docs/developer-guide.chunked/ar01s04.html#hid-subdrivers](url)

After some further digging if found that the usbhid-ups driver for NUT reports this when trying to connect to the arduino: 0.174690 Checking device (2341/8036) (002/018) 0.177223 - VendorID: 2341...

Ok, so I found a parameter called usb_set_altinterface. According to the documentation this should allow me to change the USB interface that NUT is using. However, when I set this...

This is the related line of code in libusb /*! If needed, set the USB alternate interface. * * In NUT 2.7.2 and earlier, the following call was made unconditionally:...

Thank you for the article. Is there a way we could swap the interface numbers so that HID projects use interface 0 rather than 2. Forgive me if this is...

I managed to change the interface number of CDC ACM and CDC Data by changing two definitions in the USBDesc.h file for the Arduino IDE. However, I can't figure out...