Boris Lovosevic
Boris Lovosevic
@nalzok You could probably succeed to flash the firmware if you bend the pins from the adapter a little so that you get the good and stable contacts with the...
Sorry for late reply. I can't reproduce this issue. Does it occur every time you try the https request? Here is my log, I've tried to repeat the request 10...
It looks the WiFi firmware flash was OK. It is strange that you can't get any response from ESP8285. I'll try to look into it. I'm using M1W for 10...
Thanks for the comments about flashing process. I'll use them to update the instructions for the next update.
"_I'm just confused why if i set everything back to factory it still does not work?_" Was it ever working?
It is impossible to destroy ESP8285 by flashing! But it is possible it was not flashed correctly. You can try some other flashing method. You can try to attach usb->uart...
With my firmware flashed, you should get the following messages after esp8285 reset (pin8_lo -> pin8_hi): ``` ���� ============================== LoBo ESP8266 Bootloader v1.2.0 ============================== Flash map: 2, 1MB (512+512) Flash...
ESP8285 has 1MB Flash 8Mbit === 1Mbyte, it's ok
It looks there is some issue with WiFi firmware provided in this repository's `firmware/wifi/upgrade/` directory. Could you, please, try to flash the firmware from [ESP8266_AT_LoBo](https://github.com/loboris/ESP8266_AT_LoBo). Just clone the repository, change...
I'm quite sure it will work as I've tested it today on a new M1W module, not previously flashed...