docker-calibre [BUG] Docker Container Hangs while starting up

Is there an existing issue for this?

[x] I have searched the existing issues

Current Behavior

When starting the Docker Container for Calibre, it will hang for a very long time (20-30 minutes before proceeding).

And will remain (waiting for a DRI at this point and no further.. There is nothing noticed in the logs that would give a reason for the hang.

Environment: Running under TrueNAS Scale 24.10 Intel Xeon E5-2620 v3 (Dual processor) 256GB of RAM The container is mapped to a ZFS path for the configuration/logs/files

The container is running in a privileged context

There are 22 other Docker Containers running on this server (none of which have anything close to this behaviour.

Expected Behavior

It should start up without a delay/timeout of 20-30 minutes (timed it at 26.83 minutes).

Steps To Reproduce

1: Configure the Docker Container 2: Start up Container 3: Halts at the point below. 4: After a significant amount of time (20-30 minutes) will "fail" and then proceed. 5: Once its full started, it will work "normally" (there seems to be a point in running where one MUST reboot the container otherwise its impossible to add/work with books while its unusable slow. (but that takes several days)

Environment

- OS: TrueNAS Scale 24.10 (Docker Containers)
- How docker service was installed:

CPU architecture

x86-64

Docker creation

See screen shots..

Container logs

2025-03-26 05:23:05.843113+00:00[mod-init] Running Docker Modification Logic
2025-03-26 05:23:06.134775+00:00[mod-init] Adding linuxserver/mods:universal-package-install to container
2025-03-26 05:23:06.672070+00:00[mod-init] Downloading linuxserver/mods:universal-package-install from lscr.io
2025-03-26 05:23:06.976777+00:00[mod-init] Installing linuxserver/mods:universal-package-install
2025-03-26 05:23:06.992648+00:00[mod-init] linuxserver/mods:universal-package-install applied to container
2025-03-26 05:23:07.041043+00:00[migrations] started
2025-03-26 05:23:07.041087+00:00[migrations] no migrations found
2025-03-26 05:23:07.942198+00:00usermod: no changes
2025-03-26 05:23:07.943917+00:00───────────────────────────────────────
2025-03-26 05:23:07.943995+00:002025-03-26T05:23:07.943995682Z
2025-03-26 05:23:07.944015+00:00██╗     ███████╗██╗ ██████╗
2025-03-26 05:23:07.944030+00:00██║     ██╔════╝██║██╔═══██╗
2025-03-26 05:23:07.944043+00:00██║     ███████╗██║██║   ██║
2025-03-26 05:23:07.944066+00:00██║     ╚════██║██║██║   ██║
2025-03-26 05:23:07.944081+00:00███████╗███████║██║╚██████╔╝
2025-03-26 05:23:07.944094+00:00╚══════╝╚══════╝╚═╝ ╚═════╝
2025-03-26 05:23:07.944115+00:002025-03-26T05:23:07.944115549Z
2025-03-26 05:23:07.944129+00:00Brought to you by linuxserver.io
2025-03-26 05:23:07.944143+00:00───────────────────────────────────────
2025-03-26 05:23:07.944281+00:002025-03-26T05:23:07.944281434Z
2025-03-26 05:23:07.944341+00:00To support LSIO projects visit:
2025-03-26 05:23:07.944359+00:00https://www.linuxserver.io/donate/
2025-03-26 05:23:07.944373+00:002025-03-26T05:23:07.944373241Z
2025-03-26 05:23:07.944386+00:00───────────────────────────────────────
2025-03-26 05:23:07.944400+00:00GID/UID
2025-03-26 05:23:07.944422+00:00───────────────────────────────────────
2025-03-26 05:23:07.948066+00:002025-03-26T05:23:07.948066084Z
2025-03-26 05:23:07.948104+00:00User UID:    911
2025-03-26 05:23:07.948129+00:00User GID:    911
2025-03-26 05:23:07.948143+00:00───────────────────────────────────────
2025-03-26 05:23:07.949860+00:00Linuxserver.io version: v8.0.1-ls326
2025-03-26 05:23:07.950053+00:00Build-date: 2025-03-21T09:37:50+00:00
2025-03-26 05:23:07.950105+00:00───────────────────────────────────────
2025-03-26 05:23:07.950150+00:002025-03-26T05:23:07.950150898Z
2025-03-26 05:23:08.309212+00:00**** adding /dev/dri/card0 to video group video with id 44 ****

-----------------------------------------------
Once it continues  and moves forward, this is the full log:

2025-03-26 06:01:16.546161+00:00[mod-init] Running Docker Modification Logic
2025-03-26 06:01:16.906097+00:00[mod-init] Adding linuxserver/mods:universal-package-install to container
2025-03-26 06:01:17.428717+00:00[mod-init] Downloading linuxserver/mods:universal-package-install from lscr.io
2025-03-26 06:01:17.828437+00:00[mod-init] Installing linuxserver/mods:universal-package-install
2025-03-26 06:01:17.846097+00:00[mod-init] linuxserver/mods:universal-package-install applied to container
2025-03-26 06:01:17.907690+00:00[migrations] started
2025-03-26 06:01:17.907743+00:00[migrations] no migrations found
2025-03-26 06:01:18.823247+00:00usermod: no changes
2025-03-26 06:01:18.825141+00:00───────────────────────────────────────
2025-03-26 06:01:18.825206+00:002025-03-26T06:01:18.825206831Z
2025-03-26 06:01:18.825224+00:00██╗     ███████╗██╗ ██████╗
2025-03-26 06:01:18.825238+00:00██║     ██╔════╝██║██╔═══██╗
2025-03-26 06:01:18.825252+00:00██║     ███████╗██║██║   ██║
2025-03-26 06:01:18.825275+00:00██║     ╚════██║██║██║   ██║
2025-03-26 06:01:18.825289+00:00███████╗███████║██║╚██████╔╝
2025-03-26 06:01:18.825302+00:00╚══════╝╚══════╝╚═╝ ╚═════╝
2025-03-26 06:01:18.825323+00:002025-03-26T06:01:18.825323268Z
2025-03-26 06:01:18.825336+00:00Brought to you by linuxserver.io
2025-03-26 06:01:18.825349+00:00───────────────────────────────────────
2025-03-26 06:01:18.825534+00:002025-03-26T06:01:18.825534983Z
2025-03-26 06:01:18.825613+00:00To support LSIO projects visit:
2025-03-26 06:01:18.825643+00:00https://www.linuxserver.io/donate/
2025-03-26 06:01:18.825669+00:002025-03-26T06:01:18.825669584Z
2025-03-26 06:01:18.825694+00:00───────────────────────────────────────
2025-03-26 06:01:18.825720+00:00GID/UID
2025-03-26 06:01:18.825759+00:00───────────────────────────────────────
2025-03-26 06:01:18.830330+00:002025-03-26T06:01:18.830330582Z
2025-03-26 06:01:18.830373+00:00User UID:    911
2025-03-26 06:01:18.830390+00:00User GID:    911
2025-03-26 06:01:18.830404+00:00───────────────────────────────────────
2025-03-26 06:01:18.831450+00:00Linuxserver.io version: v8.0.1-ls326
2025-03-26 06:01:18.831567+00:00Build-date: 2025-03-21T09:37:50+00:00
2025-03-26 06:01:18.831604+00:00───────────────────────────────────────
2025-03-26 06:01:18.831634+00:002025-03-26T06:01:18.831634689Z
2025-03-26 06:01:19.414561+00:00**** adding /dev/dri/card0 to video group video with id 44 ****
2025-03-26 06:04:47.911117+00:00**** Adding fonts-noto-cjk to OS package install list ****
2025-03-26 06:04:47.911540+00:00**** Adding unzip to OS package install list ****
2025-03-26 06:04:47.911584+00:00**** Adding libui-dialog-perl to OS package install list ****
2025-03-26 06:04:47.911657+00:00**** Adding libterm-readline-gnu-perl to OS package install list ****
2025-03-26 06:04:47.911761+00:00**** Adding libfuse2 to OS package install list ****
2025-03-26 06:04:47.911852+00:00**** Adding git to OS package install list ****
2025-03-26 06:04:47.911926+00:00**** Adding gdb to OS package install list ****
2025-03-26 06:04:47.942875+00:00[pkg-install-init] **** Installing all mod packages ****
2025-03-26 06:04:49.056116+00:00Get:1 https://download.docker.com/linux/ubuntu noble InRelease [48.8 kB]
2025-03-26 06:04:49.228540+00:00Get:2 http://archive.ubuntu.com/ubuntu noble InRelease [256 kB]
2025-03-26 06:04:49.500429+00:00Get:3 https://download.docker.com/linux/ubuntu noble/stable amd64 Packages [26.2 kB]
2025-03-26 06:04:49.938530+00:00Get:4 http://archive.ubuntu.com/ubuntu noble-updates InRelease [126 kB]
2025-03-26 06:04:50.111198+00:00Get:5 http://archive.ubuntu.com/ubuntu noble-security InRelease [126 kB]
2025-03-26 06:04:50.681658+00:00Get:6 http://archive.ubuntu.com/ubuntu noble/multiverse Sources [355 kB]
2025-03-26 06:04:50.942256+00:00Get:7 http://archive.ubuntu.com/ubuntu noble/main Sources [1,713 kB]
2025-03-26 06:04:51.214001+00:00Get:8 http://archive.ubuntu.com/ubuntu noble/restricted Sources [21.8 kB]
2025-03-26 06:04:51.238598+00:00Get:9 http://archive.ubuntu.com/ubuntu noble/universe Sources [24.3 MB]
2025-03-26 06:04:52.316786+00:00Get:10 http://archive.ubuntu.com/ubuntu noble/main amd64 Packages [1,808 kB]
2025-03-26 06:04:52.366381+00:00Get:11 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages [19.3 MB]
2025-03-26 06:04:53.062988+00:00Get:12 http://archive.ubuntu.com/ubuntu noble/restricted amd64 Packages [117 kB]
2025-03-26 06:04:53.066237+00:00Get:13 http://archive.ubuntu.com/ubuntu noble/multiverse amd64 Packages [331 kB]
2025-03-26 06:04:53.074999+00:00Get:14 http://archive.ubuntu.com/ubuntu noble-updates/main Sources [490 kB]
2025-03-26 06:04:53.089517+00:00Get:15 http://archive.ubuntu.com/ubuntu noble-updates/restricted Sources [37.1 kB]
2025-03-26 06:04:53.090066+00:00Get:16 http://archive.ubuntu.com/ubuntu noble-updates/universe Sources [530 kB]
2025-03-26 06:04:53.104812+00:00Get:17 http://archive.ubuntu.com/ubuntu noble-updates/multiverse Sources [18.5 kB]
2025-03-26 06:04:53.105716+00:00Get:18 http://archive.ubuntu.com/ubuntu noble-updates/universe amd64 Packages [1,355 kB]
2025-03-26 06:04:53.167527+00:00Get:19 http://archive.ubuntu.com/ubuntu noble-updates/restricted amd64 Packages [1,050 kB]
2025-03-26 06:04:53.198405+00:00Get:20 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 Packages [1,209 kB]
2025-03-26 06:04:53.232534+00:00Get:21 http://archive.ubuntu.com/ubuntu noble-updates/multiverse amd64 Packages [31.1 kB]
2025-03-26 06:04:53.234180+00:00Get:22 http://archive.ubuntu.com/ubuntu noble-security/main Sources [195 kB]
2025-03-26 06:04:53.239369+00:00Get:23 http://archive.ubuntu.com/ubuntu noble-security/multiverse Sources [11.8 kB]
2025-03-26 06:04:53.239707+00:00Get:24 http://archive.ubuntu.com/ubuntu noble-security/restricted Sources [34.6 kB]
2025-03-26 06:04:53.240882+00:00Get:25 http://archive.ubuntu.com/ubuntu noble-security/universe Sources [384 kB]
2025-03-26 06:04:53.329744+00:00Get:26 http://archive.ubuntu.com/ubuntu noble-security/main amd64 Packages [848 kB]
2025-03-26 06:04:53.353315+00:00Get:27 http://archive.ubuntu.com/ubuntu noble-security/multiverse amd64 Packages [26.5 kB]
2025-03-26 06:04:53.354192+00:00Get:28 http://archive.ubuntu.com/ubuntu noble-security/restricted amd64 Packages [922 kB]
2025-03-26 06:04:53.446659+00:00Get:29 http://archive.ubuntu.com/ubuntu noble-security/universe amd64 Packages [1,062 kB]
2025-03-26 06:04:55.397422+00:00Fetched 56.7 MB in 7s (8,455 kB/s)
2025-03-26 06:04:56.850691+00:00Reading package lists...
2025-03-26 06:04:58.396665+00:00Reading package lists...
2025-03-26 06:04:58.680260+00:00Building dependency tree...
2025-03-26 06:04:58.699229+00:00Reading state information...
2025-03-26 06:04:58.940356+00:00The following additional packages will be installed:
2025-03-26 06:04:58.940492+00:00git-man libbabeltrace1 libdebuginfod-common libdebuginfod1t64 libdw1t64
2025-03-26 06:04:58.940950+00:00libelf1t64 liberror-perl libfile-slurp-perl libipt2 libpython3.12t64
2025-03-26 06:04:58.941914+00:00libsource-highlight-common libsource-highlight4t64 libstring-shellquote-perl
2025-03-26 06:04:58.943701+00:00Suggested packages:
2025-03-26 06:04:58.943755+00:00fonts-noto-cjk-extra gdb-doc gdbserver gettext-base git-daemon-run
2025-03-26 06:04:58.943775+00:00| git-daemon-sysvinit git-doc git-email git-gui gitk gitweb git-cvs
2025-03-26 06:04:58.943789+00:00git-mediawiki git-svn zip
2025-03-26 06:04:58.943802+00:00Recommended packages:
2025-03-26 06:04:58.943834+00:00libc-dbg patch less
2025-03-26 06:04:59.342476+00:00The following NEW packages will be installed:
2025-03-26 06:04:59.343041+00:00fonts-noto-cjk gdb git git-man libbabeltrace1 libdebuginfod-common
2025-03-26 06:04:59.343641+00:00libdebuginfod1t64 liberror-perl libfile-slurp-perl libfuse2t64 libipt2
2025-03-26 06:04:59.344579+00:00libpython3.12t64 libsource-highlight-common libsource-highlight4t64
2025-03-26 06:04:59.345920+00:00libstring-shellquote-perl libterm-readline-gnu-perl libui-dialog-perl unzip
2025-03-26 06:04:59.347719+00:00The following packages will be upgraded:
2025-03-26 06:04:59.350047+00:00libdw1t64 libelf1t64
2025-03-26 06:04:59.527089+00:002 upgraded, 18 newly installed, 0 to remove and 12 not upgraded.
2025-03-26 06:04:59.527147+00:00Need to get 73.8 MB of archives.
2025-03-26 06:04:59.527164+00:00After this operation, 143 MB of additional disk space will be used.
2025-03-26 06:04:59.527179+00:00Get:1 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdebuginfod-common all 0.190-1.1ubuntu0.1 [14.6 kB]
2025-03-26 06:04:59.657082+00:00Get:2 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdw1t64 amd64 0.190-1.1ubuntu0.1 [261 kB]
2025-03-26 06:04:59.896089+00:00Get:3 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libelf1t64 amd64 0.190-1.1ubuntu0.1 [57.8 kB]
2025-03-26 06:04:59.913659+00:00Get:4 http://archive.ubuntu.com/ubuntu noble/main amd64 fonts-noto-cjk all 1:20230817+repack1-3 [61.2 MB]
2025-03-26 06:05:01.627243+00:00Get:5 http://archive.ubuntu.com/ubuntu noble/main amd64 libbabeltrace1 amd64 1.5.11-3build3 [164 kB]
2025-03-26 06:05:01.629599+00:00Get:6 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdebuginfod1t64 amd64 0.190-1.1ubuntu0.1 [17.1 kB]
2025-03-26 06:05:01.630377+00:00Get:7 http://archive.ubuntu.com/ubuntu noble/main amd64 libipt2 amd64 2.0.6-1build1 [45.7 kB]
2025-03-26 06:05:01.631495+00:00Get:8 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libpython3.12t64 amd64 3.12.3-1ubuntu0.5 [2,339 kB]
2025-03-26 06:05:01.672409+00:00Get:9 http://archive.ubuntu.com/ubuntu noble/main amd64 libsource-highlight-common all 3.1.9-4.3build1 [64.2 kB]
2025-03-26 06:05:01.675265+00:00Get:10 http://archive.ubuntu.com/ubuntu noble/main amd64 libsource-highlight4t64 amd64 3.1.9-4.3build1 [258 kB]
2025-03-26 06:05:01.681683+00:00Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 gdb amd64 15.0.50.20240403-0ubuntu1 [4,010 kB]
2025-03-26 06:05:01.754755+00:00Get:12 http://archive.ubuntu.com/ubuntu noble/main amd64 liberror-perl all 0.17029-2 [25.6 kB]
2025-03-26 06:05:01.755351+00:00Get:13 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git-man all 1:2.43.0-1ubuntu7.2 [1,100 kB]
2025-03-26 06:05:01.834578+00:00Get:14 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git amd64 1:2.43.0-1ubuntu7.2 [3,679 kB]
2025-03-26 06:05:01.909123+00:00Get:15 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfile-slurp-perl all 9999.32-2 [21.7 kB]
2025-03-26 06:05:01.909641+00:00Get:16 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfuse2t64 amd64 2.9.9-8.1build1 [89.9 kB]
2025-03-26 06:05:01.912577+00:00Get:17 http://archive.ubuntu.com/ubuntu noble/main amd64 libstring-shellquote-perl all 1.04-3 [11.3 kB]
2025-03-26 06:05:01.912946+00:00Get:18 http://archive.ubuntu.com/ubuntu noble/universe amd64 libterm-readline-gnu-perl amd64 1.46-1build3 [89.9 kB]
2025-03-26 06:05:01.914872+00:00Get:19 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 unzip amd64 6.0-28ubuntu4.1 [174 kB]
2025-03-26 06:05:01.917525+00:00Get:20 http://archive.ubuntu.com/ubuntu noble/universe amd64 libui-dialog-perl all 1.21-0.1 [131 kB]
2025-03-26 06:05:05.937724+00:00Preconfiguring packages ...
2025-03-26 06:05:06.425432+00:00Fetched 73.8 MB in 3s (29.1 MB/s)
2025-03-26 06:05:06.930143+00:00Selecting previously unselected package libdebuginfod-common.
2025-03-26 06:05:10.079366+00:00(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 36109 files and directories currently installed.)
2025-03-26 06:05:10.081385+00:00Preparing to unpack .../00-libdebuginfod-common_0.190-1.1ubuntu0.1_all.deb ...
2025-03-26 06:05:10.091249+00:00Unpacking libdebuginfod-common (0.190-1.1ubuntu0.1) ...
2025-03-26 06:05:10.195431+00:00Preparing to unpack .../01-libdw1t64_0.190-1.1ubuntu0.1_amd64.deb ...
2025-03-26 06:05:10.228208+00:00Unpacking libdw1t64:amd64 (0.190-1.1ubuntu0.1) over (0.190-1.1build4.1) ...
2025-03-26 06:05:11.023466+00:00Preparing to unpack .../02-libelf1t64_0.190-1.1ubuntu0.1_amd64.deb ...
2025-03-26 06:05:11.060798+00:00Unpacking libelf1t64:amd64 (0.190-1.1ubuntu0.1) over (0.190-1.1build4.1) ...
2025-03-26 06:05:11.796128+00:00Selecting previously unselected package fonts-noto-cjk.
2025-03-26 06:05:11.800534+00:00Preparing to unpack .../03-fonts-noto-cjk_1%3a20230817+repack1-3_all.deb ...
2025-03-26 06:05:11.890042+00:00Unpacking fonts-noto-cjk (1:20230817+repack1-3) ...
2025-03-26 06:05:13.102899+00:00Selecting previously unselected package libbabeltrace1:amd64.
2025-03-26 06:05:13.109508+00:00Preparing to unpack .../04-libbabeltrace1_1.5.11-3build3_amd64.deb ...
2025-03-26 06:05:13.119745+00:00Unpacking libbabeltrace1:amd64 (1.5.11-3build3) ...
2025-03-26 06:05:13.225393+00:00Selecting previously unselected package libdebuginfod1t64:amd64.
2025-03-26 06:05:13.231278+00:00Preparing to unpack .../05-libdebuginfod1t64_0.190-1.1ubuntu0.1_amd64.deb ...
2025-03-26 06:05:13.238849+00:00Unpacking libdebuginfod1t64:amd64 (0.190-1.1ubuntu0.1) ...
2025-03-26 06:05:13.308737+00:00Selecting previously unselected package libipt2.
2025-03-26 06:05:13.314001+00:00Preparing to unpack .../06-libipt2_2.0.6-1build1_amd64.deb ...
2025-03-26 06:05:13.320836+00:00Unpacking libipt2 (2.0.6-1build1) ...
2025-03-26 06:05:13.441694+00:00Selecting previously unselected package libpython3.12t64:amd64.
2025-03-26 06:05:13.449540+00:00Preparing to unpack .../07-libpython3.12t64_3.12.3-1ubuntu0.5_amd64.deb ...
2025-03-26 06:05:13.458150+00:00Unpacking libpython3.12t64:amd64 (3.12.3-1ubuntu0.5) ...
2025-03-26 06:05:13.663926+00:00Selecting previously unselected package libsource-highlight-common.
2025-03-26 06:05:13.669092+00:00Preparing to unpack .../08-libsource-highlight-common_3.1.9-4.3build1_all.deb ...
2025-03-26 06:05:13.679307+00:00Unpacking libsource-highlight-common (3.1.9-4.3build1) ...
2025-03-26 06:05:13.818656+00:00Selecting previously unselected package libsource-highlight4t64:amd64.
2025-03-26 06:05:13.823131+00:00Preparing to unpack .../09-libsource-highlight4t64_3.1.9-4.3build1_amd64.deb ...
2025-03-26 06:05:13.841265+00:00Unpacking libsource-highlight4t64:amd64 (3.1.9-4.3build1) ...
2025-03-26 06:05:14.014796+00:00Selecting previously unselected package gdb.
2025-03-26 06:05:14.020700+00:00Preparing to unpack .../10-gdb_15.0.50.20240403-0ubuntu1_amd64.deb ...
2025-03-26 06:05:14.031857+00:00Unpacking gdb (15.0.50.20240403-0ubuntu1) ...
2025-03-26 06:05:14.309022+00:00Selecting previously unselected package liberror-perl.
2025-03-26 06:05:14.313227+00:00Preparing to unpack .../11-liberror-perl_0.17029-2_all.deb ...
2025-03-26 06:05:14.322223+00:00Unpacking liberror-perl (0.17029-2) ...
2025-03-26 06:05:14.397526+00:00Selecting previously unselected package git-man.
2025-03-26 06:05:14.403018+00:00Preparing to unpack .../12-git-man_1%3a2.43.0-1ubuntu7.2_all.deb ...
2025-03-26 06:05:14.412585+00:00Unpacking git-man (1:2.43.0-1ubuntu7.2) ...
2025-03-26 06:05:14.529749+00:00Selecting previously unselected package git.
2025-03-26 06:05:14.535466+00:00Preparing to unpack .../13-git_1%3a2.43.0-1ubuntu7.2_amd64.deb ...
2025-03-26 06:05:14.552518+00:00Unpacking git (1:2.43.0-1ubuntu7.2) ...
2025-03-26 06:05:14.887377+00:00Selecting previously unselected package libfile-slurp-perl.
2025-03-26 06:05:14.891918+00:00Preparing to unpack .../14-libfile-slurp-perl_9999.32-2_all.deb ...
2025-03-26 06:05:14.900879+00:00Unpacking libfile-slurp-perl (9999.32-2) ...
2025-03-26 06:05:14.983098+00:00Selecting previously unselected package libfuse2t64:amd64.
2025-03-26 06:05:14.987606+00:00Preparing to unpack .../15-libfuse2t64_2.9.9-8.1build1_amd64.deb ...
2025-03-26 06:05:14.995698+00:00Unpacking libfuse2t64:amd64 (2.9.9-8.1build1) ...
2025-03-26 06:05:15.100346+00:00Selecting previously unselected package libstring-shellquote-perl.
2025-03-26 06:05:15.106170+00:00Preparing to unpack .../16-libstring-shellquote-perl_1.04-3_all.deb ...
2025-03-26 06:05:15.134565+00:00Unpacking libstring-shellquote-perl (1.04-3) ...
2025-03-26 06:05:15.208675+00:00Selecting previously unselected package libterm-readline-gnu-perl.
2025-03-26 06:05:15.214606+00:00Preparing to unpack .../17-libterm-readline-gnu-perl_1.46-1build3_amd64.deb ...
2025-03-26 06:05:15.224935+00:00Unpacking libterm-readline-gnu-perl (1.46-1build3) ...
2025-03-26 06:05:15.334649+00:00Selecting previously unselected package unzip.
2025-03-26 06:05:15.340620+00:00Preparing to unpack .../18-unzip_6.0-28ubuntu4.1_amd64.deb ...
2025-03-26 06:05:15.352194+00:00Unpacking unzip (6.0-28ubuntu4.1) ...
2025-03-26 06:05:15.436205+00:00Selecting previously unselected package libui-dialog-perl.
2025-03-26 06:05:15.442201+00:00Preparing to unpack .../19-libui-dialog-perl_1.21-0.1_all.deb ...
2025-03-26 06:05:15.452880+00:00Unpacking libui-dialog-perl (1.21-0.1) ...
2025-03-26 06:05:16.235574+00:00Setting up libfile-slurp-perl (9999.32-2) ...
2025-03-26 06:05:16.278326+00:00Setting up libdebuginfod-common (0.190-1.1ubuntu0.1) ...
2025-03-26 06:05:16.556359+00:00Setting up unzip (6.0-28ubuntu4.1) ...
2025-03-26 06:05:16.612075+00:00Setting up fonts-noto-cjk (1:20230817+repack1-3) ...
2025-03-26 06:05:16.649518+00:00Setting up libterm-readline-gnu-perl (1.46-1build3) ...
2025-03-26 06:05:16.677373+00:00Setting up libstring-shellquote-perl (1.04-3) ...
2025-03-26 06:05:16.708009+00:00Setting up libsource-highlight-common (3.1.9-4.3build1) ...
2025-03-26 06:05:16.735069+00:00Setting up libelf1t64:amd64 (0.190-1.1ubuntu0.1) ...
2025-03-26 06:05:16.772086+00:00Setting up libdw1t64:amd64 (0.190-1.1ubuntu0.1) ...
2025-03-26 06:05:16.802057+00:00Setting up liberror-perl (0.17029-2) ...
2025-03-26 06:05:16.835673+00:00Setting up libpython3.12t64:amd64 (3.12.3-1ubuntu0.5) ...
2025-03-26 06:05:16.877656+00:00Setting up libipt2 (2.0.6-1build1) ...
2025-03-26 06:05:16.919326+00:00Setting up libbabeltrace1:amd64 (1.5.11-3build3) ...
2025-03-26 06:05:16.950246+00:00Setting up git-man (1:2.43.0-1ubuntu7.2) ...
2025-03-26 06:05:16.995483+00:00Setting up libui-dialog-perl (1.21-0.1) ...
2025-03-26 06:05:17.026970+00:00Setting up libfuse2t64:amd64 (2.9.9-8.1build1) ...
2025-03-26 06:05:17.064889+00:00Setting up libdebuginfod1t64:amd64 (0.190-1.1ubuntu0.1) ...
2025-03-26 06:05:17.101564+00:00Setting up libsource-highlight4t64:amd64 (3.1.9-4.3build1) ...
2025-03-26 06:05:17.135497+00:00Setting up gdb (15.0.50.20240403-0ubuntu1) ...
2025-03-26 06:05:17.205619+00:00Setting up git (1:2.43.0-1ubuntu7.2) ...
2025-03-26 06:05:17.266277+00:00Processing triggers for libc-bin (2.39-0ubuntu8.4) ...
2025-03-26 06:05:25.482011+00:00Processing triggers for man-db (2.12.0-4build2) ...
2025-03-26 06:05:30.314751+00:00Processing triggers for fontconfig (2.15.0-1.1ubuntu2) ...
2025-03-26 06:05:32.052635+00:00[custom-init] No custom files found, skipping...
2025-03-26 06:05:32.100846+00:00[ls.io-init] done.
2025-03-26 06:05:32.664308+00:00Connection failure: Connection refused
2025-03-26 06:05:32.664401+00:00pa_context_connect() failed: Connection refused
2025-03-26 06:05:32.820696+00:00Openbox-Message: Failed to open the display from the DISPLAY environment variable.
2025-03-26 06:05:32.858499+00:00Connection failure: Connection refused
2025-03-26 06:05:32.858563+00:00pa_context_connect() failed: Connection refused
2025-03-26 06:05:33.947834+00:00Openbox-Message: Failed to open the display from the DISPLAY environment variable.
2025-03-26 06:05:34.733761+00:00_XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created.
2025-03-26 06:05:34.737042+00:002025-03-26T06:05:34.737042364Z
2025-03-26 06:05:34.737101+00:00Xvnc KasmVNC 1.3.3 - built Mar  8 2025 19:18:33
2025-03-26 06:05:34.737118+00:00Copyright (C) 1999-2018 KasmVNC Team and many others (see README.me)
2025-03-26 06:05:34.737133+00:00See http://kasmweb.com for information on KasmVNC.
2025-03-26 06:05:34.737183+00:00Underlying X server release 12101012
2025-03-26 06:05:34.737200+00:002025-03-26T06:05:34.737200715Z
2025-03-26 06:05:35.451844+00:00The XKEYBOARD keymap compiler (xkbcomp) reports:
2025-03-26 06:05:35.451913+00:00> Warning:          Could not resolve keysym XF86CameraAccessEnable
2025-03-26 06:05:35.451948+00:00> Warning:          Could not resolve keysym XF86CameraAccessDisable
2025-03-26 06:05:35.452017+00:00> Warning:          Could not resolve keysym XF86CameraAccessToggle
2025-03-26 06:05:35.452054+00:00> Warning:          Could not resolve keysym XF86NextElement
2025-03-26 06:05:35.452083+00:00> Warning:          Could not resolve keysym XF86PreviousElement
2025-03-26 06:05:35.452128+00:00> Warning:          Could not resolve keysym XF86AutopilotEngageToggle
2025-03-26 06:05:35.452156+00:00> Warning:          Could not resolve keysym XF86MarkWaypoint
2025-03-26 06:05:35.452180+00:00> Warning:          Could not resolve keysym XF86Sos
2025-03-26 06:05:35.452204+00:00> Warning:          Could not resolve keysym XF86NavChart
2025-03-26 06:05:35.457521+00:00> Warning:          Could not resolve keysym XF86FishingChart
2025-03-26 06:05:35.457564+00:00> Warning:          Could not resolve keysym XF86SingleRangeRadar
2025-03-26 06:05:35.457582+00:00> Warning:          Could not resolve keysym XF86DualRangeRadar
2025-03-26 06:05:35.457596+00:00> Warning:          Could not resolve keysym XF86RadarOverlay
2025-03-26 06:05:35.457648+00:00> Warning:          Could not resolve keysym XF86TraditionalSonar
2025-03-26 06:05:35.457672+00:00> Warning:          Could not resolve keysym XF86ClearvuSonar
2025-03-26 06:05:35.457687+00:00> Warning:          Could not resolve keysym XF86SidevuSonar
2025-03-26 06:05:35.457701+00:00> Warning:          Could not resolve keysym XF86NavInfo
2025-03-26 06:05:35.457729+00:00Errors from xkbcomp are not fatal to the X server
2025-03-26 06:05:35.466470+00:00[mi] mieq: warning: overriding existing handler (nil) with 0x55e6ebf7b930 for event 2
2025-03-26 06:05:35.466525+00:00[mi] mieq: warning: overriding existing handler (nil) with 0x55e6ebf7b930 for event 3
2025-03-26 06:05:35.483368+00:00Obt-Message: Xinerama extension is not present on the server
2025-03-26 06:05:42.894028+00:00time="2025-03-25T23:05:42.893742102-07:00" level=error msg="failed to mount overlay: invalid argument" storage-driver=overlay2
2025-03-26 06:06:01.417203+00:00Traceback (most recent call last):
2025-03-26 06:06:01.417276+00:00File "calibre/gui2/ui.py", line 148, in __init__
2025-03-26 06:06:01.417326+00:00File "calibre/gui2/ui.py", line 166, in init_iaction
2025-03-26 06:06:01.417343+00:00File "calibre/customize/__init__.py", line 658, in load_actual_plugin
2025-03-26 06:06:01.417356+00:00File "importlib/__init__.py", line 126, in import_module
2025-03-26 06:06:01.417372+00:00File "<frozen importlib._bootstrap>", line 1204, in _gcd_import
2025-03-26 06:06:01.417407+00:00File "<frozen importlib._bootstrap>", line 1176, in _find_and_load
2025-03-26 06:06:01.417422+00:00File "<frozen importlib._bootstrap>", line 1147, in _find_and_load_unlocked
2025-03-26 06:06:01.417442+00:00File "<frozen importlib._bootstrap>", line 690, in _load_unlocked
2025-03-26 06:06:01.417525+00:00File "calibre/customize/zipplugin.py", line 203, in exec_module
2025-03-26 06:06:01.417556+00:00File "calibre/customize/zipplugin.py", line 199, in get_code
2025-03-26 06:06:01.417572+00:00File "calibre_plugins.savetoformat.savetoformataction", line 53
2025-03-26 06:06:01.417585+00:00print 'Default saving'
2025-03-26 06:06:01.417635+00:00^^^^^^^^^^^^^^^^^^^^^^
2025-03-26 06:06:01.417657+00:00SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)?
2025-03-26 06:06:05.912124+00:00Using QT6
2025-03-26 06:06:05.912216+00:00Ya existen las librerias mutagen y rarfile
2025-03-26 06:06:05.912226+00:00Textdiff: self.menu:

Mar 26 '25 06:03 mrdmiller2

Thanks for opening your first issue here! Be sure to follow the relevant issue templates, or risk having this issue marked as invalid.

Mar 26 '25 06:03 github-actions[bot]

The screen shots of the Docker container creation.. (I've blurred out usernames and passwords)

Mar 26 '25 06:03 mrdmiller2

One more data point.. I have Calibre Web and Radarr running (also from linuxserver) on this same system and neither one experience anything like this, so its definitely something unique to this image/container/build.

Mar 26 '25 06:03 mrdmiller2

How's the startup when you don't give the container a iGPU?

Mar 26 '25 06:03 Roxedus

How's the startup when you don't give the container a iGPU?

Same behavior... in fact, I only checked that checkbox today.. but this problem has been going on for months.

Mar 26 '25 12:03 mrdmiller2

Have you tried older tag versions?

Mar 26 '25 12:03 j0nnymoe

Have you tried older tag versions?

I have not, but considering this problem has existed since at least 7.20 (I've had this configuration running for almost a year) and as you can see, I have it set so it always pulls the image each time I restart the container so I'm constantly going up a version (because I need to reboot the container due to it becoming increasingly slow/sluggish before its unusable).

It should be noted that I have a LOT of books in Calibre (I think at last count something like 30K books spread across 4 libraries). With one library (the primary one it fires up) having close to 20K alone.

Mar 26 '25 12:03 mrdmiller2

It's not uncommon for calibre to introduce feature requirements that older CPU's aren't able to provide. Do you have any other kasm based VNC containers running?

Mar 26 '25 13:03 j0nnymoe

It's not uncommon for calibre to introduce feature requirements that older CPU's aren't able to provide. Do you have any other kasm based VNC containers running?

This is the only one.. all the others don't use kasm. But like I said, Calibre itself works fine (up until I need to bounce it), but its the 20-30 minute delay in booting the docker container (with that hang on the dri card reference) that's the primary bug I'm reporting. I can switch this to another system (one running the latest gen AMD EYPC processor, but I don't think its going to matter much since this doesn't appear to be tied to the hardware.. but for the sake of testing if needed, I can do that.. all the configurations and files are external to the system.. even if calibre doesn't like NFS file shares (one reason why I'm running this on our TrueNAS server, to eliminate the issue with Calibre and NFS shares)

Mar 26 '25 13:03 mrdmiller2

are you storing your books in /config?

Mar 26 '25 13:03 Roxedus

are you storing your books in /config?

In sub-directories under /config, but yes..

Example, this is the /config path and its contents..

drwxrwxrwx 4 911 911 4 Apr 27 2023 archive drwxrwxrwx 2 911 911 4 Apr 27 2023 ssl drwxrwxrwx 3 911 911 3 Apr 27 2023 .dbus drwxrwxrwx 2 911 911 3 Apr 28 2023 TestLib drwxrwxrwx 4 911 911 5 May 3 2023 ComicBooks <--- Placeholder, using Kavita which has its own directory and content) -rwxrwxrwx 1 911 911 153779 May 16 2023 7772.lit drwxrwxrwx 10005 911 911 10007 Jun 10 2023 'Medical Library' <--- About 4000-5000 books roughly. drwxrwxrwx 3 911 911 3 Nov 24 2023 .XDG drwxrwxrwx 4 911 911 4 May 13 2024 .local -rwxrwxrwx 1 911 911 37 May 13 2024 .bashrc drwxrwxrwx 72 911 911 121 Jan 2 00:54 12 drwxrwxrwx 5 911 911 6 Jan 4 22:09 .config drwxrwxrwx 17 911 911 19 Jan 21 22:24 . drwxrwxrwx 4 911 911 4 Jan 21 22:25 toimport drwxrwxrwx 172 911 911 173 Feb 4 05:45 'Computers and Technology' <--- 2000-3000 books drwxrwxrwx 8 911 911 8 Feb 5 10:43 .cache drwxrwxrwx 21 950 8080 21 Mar 25 21:07 .. drwxrwxrwx 3966 911 911 3968 Mar 25 23:05 General <-- The largest directory (19K books) drwxrwxrwx 389 911 911 393 Mar 26 00:46 HoldingPen <--- Maybe 500 books (waiting my deft hand at adding them)

As this is all on the NAS itself, /config is just a docker mapped location that's local.. if I move it to another server, all of this would essentially be on a NFS share mapping back.. (a 40G connection path as I have a dedicated 10/40G "backbone" for NAS connections to the servers) but its the NFS portion that always seems to lead to problems/corruption hence why I decided to just keep it as close to the file source as possible, thus eliminating another variable.

Mar 26 '25 13:03 mrdmiller2

Thats why. only appdata should reside on /config

Mar 26 '25 13:03 Roxedus

According to the log, the container started at 6:01:16 and was up at 6:05:32. I see a 3 minute gap between the dri perms and the mods, which includes the init for all kasm services as well as calibre.

But as rox pointed out, the config folder should only contain the app data (including books that are already imported into Calibre).

If you map a huge folder with many thousands of files, the chown attempt can take a few minutes.

Mar 26 '25 13:03 aptalca

According to the log, the container started at 6:01:16 and was up at 6:05:32. I see a 3 minute gap between the dri perms and the mods, which includes the init for all kasm services as well as calibre.

But as rox pointed out, the config folder should only contain the app data (including books that are already imported into Calibre).

If you map a huge folder with many thousands of files, the chown attempt can take a few minutes.

I can redo the log for better illustration (you are seeing a smaller gap in time because I restarted the container a few times). The hang points are the same regardless..

And yes, in the /config path, the only books that are there are those that calibre itself knows about.. when I talk about the HoldingPen books to be added, I should clarify..

These are books that are imported "raw" into Calibre, BUT I have not yet massaged the data, organized and cleaned them up, etc... They are just "dumped" into calibre without any consideration for anything (might be dupes, or alternatives, or even bad copies.. so I don't want to pollute the final resting place so anything I import goes into a "HoldingPen" until I've checked them out, organized, fixed them up (some epubs/mobi's are not the best).. Once I put the right metadata in, they are renamed (by Calibre) and are moved into the correct library.

The Comics folder was a library I had created in Calibre until I realized Calibre is really designed more for general books and not comics/manga... I mean I can MAKE it work with addons/plugins, I find its more stable and generally better functioning sticking to its core strengths and pushing other use cases to products like Kavita/Komga that are more dedicated for that purpose so the library was created, but its empty except for maybe 1-2 files I was using for testing.. (Calibre Web only points to the General library which is the largest... I've been thinking of just merging libraries so its single one and thus only needing a single calibre-web instance.. but I feel that might be pushing the envelope a little too much since I'm expected to be hitting 50K once I'm done bringing EVERYTHING into it.

Mar 26 '25 14:03 mrdmiller2

Thats why. only appdata should reside on /config

In an ideal world, JUST the configuration files would reside in /config with book storage being held outside of that.. but alas, calibre keeps everything in that /config path.. So what's in that directory is ONLY content that relates to Calibre and nothing else.

Mar 26 '25 14:03 mrdmiller2

this is a cleaner log (no extraneous reboots or delays).. and it shows a 13-15 minute pause.. I've included a "stopwatch counter" to help.

2025-03-26 14:20:42.052879+00:00[mod-init] Running Docker Modification Logic 2025-03-26 14:20:42.336291+00:00[mod-init] Adding linuxserver/mods:universal-package-install to container 2025-03-26 14:20:42.843471+00:00[mod-init] Downloading linuxserver/mods:universal-package-install from lscr.io 2025-03-26 14:20:43.261133+00:00[mod-init] Installing linuxserver/mods:universal-package-install 2025-03-26 14:20:43.278488+00:00[mod-init] linuxserver/mods:universal-package-install applied to container 2025-03-26 14:20:43.365106+00:00[migrations] started 2025-03-26 14:20:43.365165+00:00[migrations] no migrations found 2025-03-26 14:20:43.925665+00:00usermod: no changes 2025-03-26 14:20:43.927336+00:00─────────────────────────────────────── 2025-03-26 14:20:43.927377+00:002025-03-26T14:20:43.927377564Z 2025-03-26 14:20:43.927388+00:00██╗ ███████╗██╗ ██████╗ 2025-03-26 14:20:43.927396+00:00██║ ██╔════╝██║██╔═══██╗ 2025-03-26 14:20:43.927405+00:00██║ ███████╗██║██║ ██║ 2025-03-26 14:20:43.927418+00:00██║ ╚════██║██║██║ ██║ 2025-03-26 14:20:43.927427+00:00███████╗███████║██║╚██████╔╝ 2025-03-26 14:20:43.927435+00:00╚══════╝╚══════╝╚═╝ ╚═════╝ 2025-03-26 14:20:43.927447+00:002025-03-26T14:20:43.927447177Z 2025-03-26 14:20:43.927455+00:00Brought to you by linuxserver.io 2025-03-26 14:20:43.927463+00:00─────────────────────────────────────── 2025-03-26 14:20:43.927646+00:002025-03-26T14:20:43.927646360Z 2025-03-26 14:20:43.927694+00:00To support LSIO projects visit: 2025-03-26 14:20:43.927720+00:00https://www.linuxserver.io/donate/ 2025-03-26 14:20:43.927735+00:002025-03-26T14:20:43.927735014Z 2025-03-26 14:20:43.927748+00:00─────────────────────────────────────── 2025-03-26 14:20:43.927762+00:00GID/UID 2025-03-26 14:20:43.927784+00:00─────────────────────────────────────── 2025-03-26 14:20:43.931909+00:002025-03-26T14:20:43.931909670Z 2025-03-26 14:20:43.931935+00:00User UID: 911 2025-03-26 14:20:43.931944+00:00User GID: 911 2025-03-26 14:20:43.931953+00:00─────────────────────────────────────── 2025-03-26 14:20:43.933534+00:00Linuxserver.io version: v8.0.1-ls327 2025-03-26 14:20:43.933746+00:00Build-date: 2025-03-26T06:43:58+00:00 2025-03-26 14:20:43.933770+00:00─────────────────────────────────────── 2025-03-26 14:20:43.933789+00:002025-03-26T14:20:43.933789305Z 2025-03-26 14:20:44.222673+00:00**** adding /dev/dri/card0 to video group video with id 44 **** 2025-03-26 14:35:06.632239+00:00**** Adding fonts-noto-cjk to OS package install list **** 2025-03-26 14:35:06.664138+00:00**** Adding unzip to OS package install list **** 2025-03-26 14:35:06.664195+00:00**** Adding libui-dialog-perl to OS package install list **** 2025-03-26 14:35:06.664370+00:00**** Adding libterm-readline-gnu-perl to OS package install list **** 2025-03-26 14:35:06.664383+00:00**** Adding libfuse2 to OS package install list **** 2025-03-26 14:35:06.664391+00:00**** Adding git to OS package install list **** 2025-03-26 14:35:06.664424+00:00**** Adding gdb to OS package install list **** 2025-03-26 14:35:06.686401+00:00[pkg-install-init] **** Installing all mod packages **** 2025-03-26 14:35:07.380154+00:00Get:1 https://download.docker.com/linux/ubuntu noble InRelease [48.8 kB] 2025-03-26 14:35:07.620789+00:00Get:2 http://archive.ubuntu.com/ubuntu noble InRelease [256 kB] 2025-03-26 14:35:07.785390+00:00Get:3 https://download.docker.com/linux/ubuntu noble/stable amd64 Packages [26.2 kB] 2025-03-26 14:35:08.337326+00:00Get:4 http://archive.ubuntu.com/ubuntu noble-updates InRelease [126 kB] 2025-03-26 14:35:08.512527+00:00Get:5 http://archive.ubuntu.com/ubuntu noble-security InRelease [126 kB] 2025-03-26 14:35:08.808149+00:00Get:6 http://archive.ubuntu.com/ubuntu noble/universe Sources [24.3 MB] 2025-03-26 14:35:10.205539+00:00Get:7 http://archive.ubuntu.com/ubuntu noble/multiverse Sources [355 kB] 2025-03-26 14:35:10.217595+00:00Get:8 http://archive.ubuntu.com/ubuntu noble/restricted Sources [21.8 kB] 2025-03-26 14:35:10.218655+00:00Get:9 http://archive.ubuntu.com/ubuntu noble/main Sources [1,713 kB] 2025-03-26 14:35:10.278224+00:00Get:10 http://archive.ubuntu.com/ubuntu noble/multiverse amd64 Packages [331 kB] 2025-03-26 14:35:10.289429+00:00Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 Packages [1,808 kB] 2025-03-26 14:35:10.355124+00:00Get:12 http://archive.ubuntu.com/ubuntu noble/restricted amd64 Packages [117 kB] 2025-03-26 14:35:10.358184+00:00Get:13 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages [19.3 MB] 2025-03-26 14:35:11.041821+00:00Get:14 http://archive.ubuntu.com/ubuntu noble-updates/main Sources [490 kB] 2025-03-26 14:35:11.059419+00:00Get:15 http://archive.ubuntu.com/ubuntu noble-updates/restricted Sources [37.1 kB] 2025-03-26 14:35:11.060458+00:00Get:16 http://archive.ubuntu.com/ubuntu noble-updates/multiverse Sources [18.5 kB] 2025-03-26 14:35:11.061242+00:00Get:17 http://archive.ubuntu.com/ubuntu noble-updates/universe Sources [530 kB] 2025-03-26 14:35:11.078987+00:00Get:18 http://archive.ubuntu.com/ubuntu noble-updates/restricted amd64 Packages [1,050 kB] 2025-03-26 14:35:11.118406+00:00Get:19 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 Packages [1,209 kB] 2025-03-26 14:35:11.159454+00:00Get:20 http://archive.ubuntu.com/ubuntu noble-updates/multiverse amd64 Packages [31.1 kB] 2025-03-26 14:35:11.161128+00:00Get:21 http://archive.ubuntu.com/ubuntu noble-updates/universe amd64 Packages [1,355 kB] 2025-03-26 14:35:11.207650+00:00Get:22 http://archive.ubuntu.com/ubuntu noble-security/multiverse Sources [11.8 kB] 2025-03-26 14:35:11.208451+00:00Get:23 http://archive.ubuntu.com/ubuntu noble-security/main Sources [195 kB] 2025-03-26 14:35:11.287654+00:00Get:24 http://archive.ubuntu.com/ubuntu noble-security/restricted Sources [34.6 kB] 2025-03-26 14:35:11.288856+00:00Get:25 http://archive.ubuntu.com/ubuntu noble-security/universe Sources [384 kB] 2025-03-26 14:35:11.300610+00:00Get:26 http://archive.ubuntu.com/ubuntu noble-security/universe amd64 Packages [1,062 kB] 2025-03-26 14:35:11.330288+00:00Get:27 http://archive.ubuntu.com/ubuntu noble-security/main amd64 Packages [848 kB] 2025-03-26 14:35:11.353621+00:00Get:28 http://archive.ubuntu.com/ubuntu noble-security/multiverse amd64 Packages [26.5 kB] 2025-03-26 14:35:11.354495+00:00Get:29 http://archive.ubuntu.com/ubuntu noble-security/restricted amd64 Packages [922 kB] 2025-03-26 14:35:12.946236+00:00Fetched 56.7 MB in 6s (9,774 kB/s) 2025-03-26 14:35:14.023371+00:00Reading package lists... 2025-03-26 14:35:15.377542+00:00Reading package lists... 2025-03-26 14:35:15.588847+00:00Building dependency tree... 2025-03-26 14:35:15.589611+00:00Reading state information... 2025-03-26 14:35:15.876023+00:00The following additional packages will be installed: 2025-03-26 14:35:15.876133+00:00git-man libbabeltrace1 libdebuginfod-common libdebuginfod1t64 libdw1t64 2025-03-26 14:35:15.876601+00:00libelf1t64 liberror-perl libfile-slurp-perl libipt2 libpython3.12t64 2025-03-26 14:35:15.877216+00:00libsource-highlight-common libsource-highlight4t64 libstring-shellquote-perl 2025-03-26 14:35:15.878643+00:00Suggested packages: 2025-03-26 14:35:15.878693+00:00fonts-noto-cjk-extra gdb-doc gdbserver gettext-base git-daemon-run 2025-03-26 14:35:15.878719+00:00| git-daemon-sysvinit git-doc git-email git-gui gitk gitweb git-cvs 2025-03-26 14:35:15.878733+00:00git-mediawiki git-svn zip 2025-03-26 14:35:15.878746+00:00Recommended packages: 2025-03-26 14:35:15.878781+00:00libc-dbg patch less 2025-03-26 14:35:16.047391+00:00The following NEW packages will be installed: 2025-03-26 14:35:16.047975+00:00fonts-noto-cjk gdb git git-man libbabeltrace1 libdebuginfod-common 2025-03-26 14:35:16.048570+00:00libdebuginfod1t64 liberror-perl libfile-slurp-perl libfuse2t64 libipt2 2025-03-26 14:35:16.049370+00:00libpython3.12t64 libsource-highlight-common libsource-highlight4t64 2025-03-26 14:35:16.050717+00:00libstring-shellquote-perl libterm-readline-gnu-perl libui-dialog-perl unzip 2025-03-26 14:35:16.052366+00:00The following packages will be upgraded: 2025-03-26 14:35:16.054344+00:00libdw1t64 libelf1t64 2025-03-26 14:35:16.218926+00:002 upgraded, 18 newly installed, 0 to remove and 3 not upgraded. 2025-03-26 14:35:16.218982+00:00Need to get 73.8 MB of archives. 2025-03-26 14:35:16.219007+00:00After this operation, 143 MB of additional disk space will be used. 2025-03-26 14:35:16.219021+00:00Get:1 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdebuginfod-common all 0.190-1.1ubuntu0.1 [14.6 kB] 2025-03-26 14:35:16.348921+00:00Get:2 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdw1t64 amd64 0.190-1.1ubuntu0.1 [261 kB] 2025-03-26 14:35:16.587034+00:00Get:3 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libelf1t64 amd64 0.190-1.1ubuntu0.1 [57.8 kB] 2025-03-26 14:35:16.604846+00:00Get:4 http://archive.ubuntu.com/ubuntu noble/main amd64 fonts-noto-cjk all 1:20230817+repack1-3 [61.2 MB] 2025-03-26 14:35:17.891891+00:00Get:5 http://archive.ubuntu.com/ubuntu noble/main amd64 libbabeltrace1 amd64 1.5.11-3build3 [164 kB] 2025-03-26 14:35:17.894796+00:00Get:6 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdebuginfod1t64 amd64 0.190-1.1ubuntu0.1 [17.1 kB] 2025-03-26 14:35:17.895482+00:00Get:7 http://archive.ubuntu.com/ubuntu noble/main amd64 libipt2 amd64 2.0.6-1build1 [45.7 kB] 2025-03-26 14:35:17.896591+00:00Get:8 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libpython3.12t64 amd64 3.12.3-1ubuntu0.5 [2,339 kB] 2025-03-26 14:35:17.942273+00:00Get:9 http://archive.ubuntu.com/ubuntu noble/main amd64 libsource-highlight-common all 3.1.9-4.3build1 [64.2 kB] 2025-03-26 14:35:17.943635+00:00Get:10 http://archive.ubuntu.com/ubuntu noble/main amd64 libsource-highlight4t64 amd64 3.1.9-4.3build1 [258 kB] 2025-03-26 14:35:17.948017+00:00Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 gdb amd64 15.0.50.20240403-0ubuntu1 [4,010 kB] 2025-03-26 14:35:18.019439+00:00Get:12 http://archive.ubuntu.com/ubuntu noble/main amd64 liberror-perl all 0.17029-2 [25.6 kB] 2025-03-26 14:35:18.020250+00:00Get:13 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git-man all 1:2.43.0-1ubuntu7.2 [1,100 kB] 2025-03-26 14:35:18.038448+00:00Get:14 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git amd64 1:2.43.0-1ubuntu7.2 [3,679 kB] 2025-03-26 14:35:18.118651+00:00Get:15 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfile-slurp-perl all 9999.32-2 [21.7 kB] 2025-03-26 14:35:18.119146+00:00Get:16 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfuse2t64 amd64 2.9.9-8.1build1 [89.9 kB] 2025-03-26 14:35:18.120581+00:00Get:17 http://archive.ubuntu.com/ubuntu noble/main amd64 libstring-shellquote-perl all 1.04-3 [11.3 kB] 2025-03-26 14:35:18.121011+00:00Get:18 http://archive.ubuntu.com/ubuntu noble/universe amd64 libterm-readline-gnu-perl amd64 1.46-1build3 [89.9 kB] 2025-03-26 14:35:18.122091+00:00Get:19 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 unzip amd64 6.0-28ubuntu4.1 [174 kB] 2025-03-26 14:35:18.124327+00:00Get:20 http://archive.ubuntu.com/ubuntu noble/universe amd64 libui-dialog-perl all 1.21-0.1 [131 kB] 2025-03-26 14:35:20.685155+00:00Preconfiguring packages ... 2025-03-26 14:35:21.161549+00:00Fetched 73.8 MB in 2s (36.0 MB/s) 2025-03-26 14:35:21.514737+00:00Selecting previously unselected package libdebuginfod-common. 2025-03-26 14:35:21.955718+00:00(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 36109 files and directories currently installed.) 2025-03-26 14:35:21.957871+00:00Preparing to unpack .../00-libdebuginfod-common_0.190-1.1ubuntu0.1_all.deb ... 2025-03-26 14:35:21.973735+00:00Unpacking libdebuginfod-common (0.190-1.1ubuntu0.1) ... 2025-03-26 14:35:22.086351+00:00Preparing to unpack .../01-libdw1t64_0.190-1.1ubuntu0.1_amd64.deb ... 2025-03-26 14:35:22.112892+00:00Unpacking libdw1t64:amd64 (0.190-1.1ubuntu0.1) over (0.190-1.1build4.1) ... 2025-03-26 14:35:22.515924+00:00Preparing to unpack .../02-libelf1t64_0.190-1.1ubuntu0.1_amd64.deb ... 2025-03-26 14:35:22.543325+00:00Unpacking libelf1t64:amd64 (0.190-1.1ubuntu0.1) over (0.190-1.1build4.1) ... 2025-03-26 14:35:23.114374+00:00Selecting previously unselected package fonts-noto-cjk. 2025-03-26 14:35:23.119134+00:00Preparing to unpack .../03-fonts-noto-cjk_1%3a20230817+repack1-3_all.deb ... 2025-03-26 14:35:23.160693+00:00Unpacking fonts-noto-cjk (1:20230817+repack1-3) ... 2025-03-26 14:35:24.488650+00:00Selecting previously unselected package libbabeltrace1:amd64. 2025-03-26 14:35:24.495457+00:00Preparing to unpack .../04-libbabeltrace1_1.5.11-3build3_amd64.deb ... 2025-03-26 14:35:24.502375+00:00Unpacking libbabeltrace1:amd64 (1.5.11-3build3) ... 2025-03-26 14:35:24.620561+00:00Selecting previously unselected package libdebuginfod1t64:amd64. 2025-03-26 14:35:24.625975+00:00Preparing to unpack .../05-libdebuginfod1t64_0.190-1.1ubuntu0.1_amd64.deb ... 2025-03-26 14:35:24.639591+00:00Unpacking libdebuginfod1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 14:35:24.756543+00:00Selecting previously unselected package libipt2. 2025-03-26 14:35:24.761105+00:00Preparing to unpack .../06-libipt2_2.0.6-1build1_amd64.deb ... 2025-03-26 14:35:24.783320+00:00Unpacking libipt2 (2.0.6-1build1) ... 2025-03-26 14:35:24.903107+00:00Selecting previously unselected package libpython3.12t64:amd64. 2025-03-26 14:35:24.907782+00:00Preparing to unpack .../07-libpython3.12t64_3.12.3-1ubuntu0.5_amd64.deb ... 2025-03-26 14:35:24.916431+00:00Unpacking libpython3.12t64:amd64 (3.12.3-1ubuntu0.5) ... 2025-03-26 14:35:25.140065+00:00Selecting previously unselected package libsource-highlight-common. 2025-03-26 14:35:25.147841+00:00Preparing to unpack .../08-libsource-highlight-common_3.1.9-4.3build1_all.deb ... 2025-03-26 14:35:25.156185+00:00Unpacking libsource-highlight-common (3.1.9-4.3build1) ... 2025-03-26 14:35:25.312504+00:00Selecting previously unselected package libsource-highlight4t64:amd64. 2025-03-26 14:35:25.319078+00:00Preparing to unpack .../09-libsource-highlight4t64_3.1.9-4.3build1_amd64.deb ... 2025-03-26 14:35:25.327877+00:00Unpacking libsource-highlight4t64:amd64 (3.1.9-4.3build1) ... 2025-03-26 14:35:25.421183+00:00Selecting previously unselected package gdb. 2025-03-26 14:35:25.426622+00:00Preparing to unpack .../10-gdb_15.0.50.20240403-0ubuntu1_amd64.deb ... 2025-03-26 14:35:25.434003+00:00Unpacking gdb (15.0.50.20240403-0ubuntu1) ... 2025-03-26 14:35:25.684280+00:00Selecting previously unselected package liberror-perl. 2025-03-26 14:35:25.689788+00:00Preparing to unpack .../11-liberror-perl_0.17029-2_all.deb ... 2025-03-26 14:35:25.697411+00:00Unpacking liberror-perl (0.17029-2) ... 2025-03-26 14:35:25.774549+00:00Selecting previously unselected package git-man. 2025-03-26 14:35:25.778748+00:00Preparing to unpack .../12-git-man_1%3a2.43.0-1ubuntu7.2_all.deb ... 2025-03-26 14:35:25.788364+00:00Unpacking git-man (1:2.43.0-1ubuntu7.2) ... 2025-03-26 14:35:25.911352+00:00Selecting previously unselected package git. 2025-03-26 14:35:25.916942+00:00Preparing to unpack .../13-git_1%3a2.43.0-1ubuntu7.2_amd64.deb ... 2025-03-26 14:35:25.939327+00:00Unpacking git (1:2.43.0-1ubuntu7.2) ... 2025-03-26 14:35:26.387173+00:00Selecting previously unselected package libfile-slurp-perl. 2025-03-26 14:35:26.393084+00:00Preparing to unpack .../14-libfile-slurp-perl_9999.32-2_all.deb ... 2025-03-26 14:35:26.400421+00:00Unpacking libfile-slurp-perl (9999.32-2) ... 2025-03-26 14:35:26.480460+00:00Selecting previously unselected package libfuse2t64:amd64. 2025-03-26 14:35:26.488398+00:00Preparing to unpack .../15-libfuse2t64_2.9.9-8.1build1_amd64.deb ... 2025-03-26 14:35:26.496550+00:00Unpacking libfuse2t64:amd64 (2.9.9-8.1build1) ... 2025-03-26 14:35:26.587493+00:00Selecting previously unselected package libstring-shellquote-perl. 2025-03-26 14:35:26.595470+00:00Preparing to unpack .../16-libstring-shellquote-perl_1.04-3_all.deb ... 2025-03-26 14:35:26.603237+00:00Unpacking libstring-shellquote-perl (1.04-3) ... 2025-03-26 14:35:26.685878+00:00Selecting previously unselected package libterm-readline-gnu-perl. 2025-03-26 14:35:26.693753+00:00Preparing to unpack .../17-libterm-readline-gnu-perl_1.46-1build3_amd64.deb ... 2025-03-26 14:35:26.702082+00:00Unpacking libterm-readline-gnu-perl (1.46-1build3) ... 2025-03-26 14:35:26.831218+00:00Selecting previously unselected package unzip. 2025-03-26 14:35:26.838811+00:00Preparing to unpack .../18-unzip_6.0-28ubuntu4.1_amd64.deb ... 2025-03-26 14:35:26.847420+00:00Unpacking unzip (6.0-28ubuntu4.1) ... 2025-03-26 14:35:26.946350+00:00Selecting previously unselected package libui-dialog-perl. 2025-03-26 14:35:26.952969+00:00Preparing to unpack .../19-libui-dialog-perl_1.21-0.1_all.deb ... 2025-03-26 14:35:26.961331+00:00Unpacking libui-dialog-perl (1.21-0.1) ... 2025-03-26 14:35:27.205925+00:00Setting up libfile-slurp-perl (9999.32-2) ... 2025-03-26 14:35:27.285811+00:00Setting up libdebuginfod-common (0.190-1.1ubuntu0.1) ... 2025-03-26 14:35:27.543727+00:00Setting up unzip (6.0-28ubuntu4.1) ... 2025-03-26 14:35:27.585033+00:00Setting up fonts-noto-cjk (1:20230817+repack1-3) ... 2025-03-26 14:35:27.616997+00:00Setting up libterm-readline-gnu-perl (1.46-1build3) ... 2025-03-26 14:35:27.660259+00:00Setting up libstring-shellquote-perl (1.04-3) ... 2025-03-26 14:35:27.685251+00:00Setting up libsource-highlight-common (3.1.9-4.3build1) ... 2025-03-26 14:35:27.710343+00:00Setting up libelf1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 14:35:27.735508+00:00Setting up libdw1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 14:35:27.760693+00:00Setting up liberror-perl (0.17029-2) ... 2025-03-26 14:35:27.805353+00:00Setting up libpython3.12t64:amd64 (3.12.3-1ubuntu0.5) ... 2025-03-26 14:35:27.835422+00:00Setting up libipt2 (2.0.6-1build1) ... 2025-03-26 14:35:27.867430+00:00Setting up libbabeltrace1:amd64 (1.5.11-3build3) ... 2025-03-26 14:35:27.911676+00:00Setting up git-man (1:2.43.0-1ubuntu7.2) ... 2025-03-26 14:35:27.950412+00:00Setting up libui-dialog-perl (1.21-0.1) ... 2025-03-26 14:35:27.976279+00:00Setting up libfuse2t64:amd64 (2.9.9-8.1build1) ... 2025-03-26 14:35:28.008828+00:00Setting up libdebuginfod1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 14:35:28.035410+00:00Setting up libsource-highlight4t64:amd64 (3.1.9-4.3build1) ... 2025-03-26 14:35:28.092762+00:00Setting up gdb (15.0.50.20240403-0ubuntu1) ... 2025-03-26 14:35:28.150209+00:00Setting up git (1:2.43.0-1ubuntu7.2) ... 2025-03-26 14:35:28.204437+00:00Processing triggers for libc-bin (2.39-0ubuntu8.4) ... 2025-03-26 14:35:28.909716+00:00Processing triggers for man-db (2.12.0-4build2) ... 2025-03-26 14:35:31.714035+00:00Processing triggers for fontconfig (2.15.0-1.1ubuntu2) ... 2025-03-26 14:35:32.145613+00:00[custom-init] No custom files found, skipping... 2025-03-26 14:35:32.181352+00:00[ls.io-init] done. 2025-03-26 14:35:32.226419+00:00Openbox-Message: Failed to open the display from the DISPLAY environment variable. 2025-03-26 14:35:32.475556+00:00_XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. 2025-03-26 14:35:32.476781+00:002025-03-26T14:35:32.476781269Z 2025-03-26 14:35:32.476879+00:00Xvnc KasmVNC 1.3.3 - built Mar 22 2025 19:06:40 2025-03-26 14:35:32.476909+00:00Copyright (C) 1999-2018 KasmVNC Team and many others (see README.me) 2025-03-26 14:35:32.476936+00:00See http://kasmweb.com for information on KasmVNC. 2025-03-26 14:35:32.476957+00:00Underlying X server release 12101012 2025-03-26 14:35:32.476998+00:002025-03-26T14:35:32.476998745Z 2025-03-26 14:35:32.538850+00:00The XKEYBOARD keymap compiler (xkbcomp) reports: 2025-03-26 14:35:32.538898+00:00> Warning: Could not resolve keysym XF86CameraAccessEnable 2025-03-26 14:35:32.538909+00:00> Warning: Could not resolve keysym XF86CameraAccessDisable 2025-03-26 14:35:32.538918+00:00> Warning: Could not resolve keysym XF86CameraAccessToggle 2025-03-26 14:35:32.538966+00:00> Warning: Could not resolve keysym XF86NextElement 2025-03-26 14:35:32.538980+00:00> Warning: Could not resolve keysym XF86PreviousElement 2025-03-26 14:35:32.538989+00:00> Warning: Could not resolve keysym XF86AutopilotEngageToggle 2025-03-26 14:35:32.539007+00:00> Warning: Could not resolve keysym XF86MarkWaypoint 2025-03-26 14:35:32.539015+00:00> Warning: Could not resolve keysym XF86Sos 2025-03-26 14:35:32.539023+00:00> Warning: Could not resolve keysym XF86NavChart 2025-03-26 14:35:32.539031+00:00> Warning: Could not resolve keysym XF86FishingChart 2025-03-26 14:35:32.539046+00:00> Warning: Could not resolve keysym XF86SingleRangeRadar 2025-03-26 14:35:32.539055+00:00> Warning: Could not resolve keysym XF86DualRangeRadar 2025-03-26 14:35:32.539066+00:00> Warning: Could not resolve keysym XF86RadarOverlay 2025-03-26 14:35:32.539075+00:00> Warning: Could not resolve keysym XF86TraditionalSonar 2025-03-26 14:35:32.539090+00:00> Warning: Could not resolve keysym XF86ClearvuSonar 2025-03-26 14:35:32.539098+00:00> Warning: Could not resolve keysym XF86SidevuSonar 2025-03-26 14:35:32.539106+00:00> Warning: Could not resolve keysym XF86NavInfo 2025-03-26 14:35:32.540192+00:00Errors from xkbcomp are not fatal to the X server 2025-03-26 14:35:32.568318+00:00[mi] mieq: warning: overriding existing handler (nil) with 0x5558502f3930 for event 2 2025-03-26 14:35:32.568379+00:00[mi] mieq: warning: overriding existing handler (nil) with 0x5558502f3930 for event 3 2025-03-26 14:35:32.714269+00:0019 2025-03-26 14:35:33.262163+00:00Obt-Message: Xinerama extension is not present on the server 2025-03-26 14:35:38.155423+00:00time="2025-03-26T07:35:38.155021248-07:00" level=error msg="failed to mount overlay: invalid argument" storage-driver=overlay2 2025-03-26 14:35:41.686207+00:00Traceback (most recent call last): 2025-03-26 14:35:41.686256+00:00File "calibre/gui2/ui.py", line 148, in init 2025-03-26 14:35:41.686311+00:00File "calibre/gui2/ui.py", line 166, in init_iaction 2025-03-26 14:35:41.686321+00:00File "calibre/customize/init.py", line 658, in load_actual_plugin 2025-03-26 14:35:41.686330+00:00File "importlib/init.py", line 126, in import_module 2025-03-26 14:35:41.686338+00:00File "", line 1204, in _gcd_import 2025-03-26 14:35:41.686361+00:00File "", line 1176, in _find_and_load 2025-03-26 14:35:41.686370+00:00File "", line 1147, in _find_and_load_unlocked 2025-03-26 14:35:41.686379+00:00File "", line 690, in _load_unlocked 2025-03-26 14:35:41.686424+00:00File "calibre/customize/zipplugin.py", line 203, in exec_module 2025-03-26 14:35:41.686441+00:00File "calibre/customize/zipplugin.py", line 199, in get_code 2025-03-26 14:35:41.686456+00:00File "calibre_plugins.savetoformat.savetoformataction", line 53 2025-03-26 14:35:41.686469+00:00print 'Default saving' 2025-03-26 14:35:41.686497+00:00^^^^^^^^^^^^^^^^^^^^^^ 2025-03-26 14:35:41.686513+00:00SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? 2025-03-26 14:35:44.404224+00:00Using QT6 2025-03-26 14:35:44.404301+00:00Ya existen las librerias mutagen y rarfile 2025-03-26 14:35:44.404321+00:00Textdiff: self.menu:

Mar 26 '25 14:03 mrdmiller2

Just noticed a couple of things.

You did not set PUID/PGID so the container is running with uid/gid 911:911. That's what it's trying to chown the config folder as. Just fyi at this point.

Also, you have set CUSTOM_USER which is a function of the baseimage but not something I've ever played with. I remember there was a behavior we noticed a while back with the usermod steps in the baseimage where it would recursively force chown the user's home folder. That could be a factor here. Would need to do some testing.

In the meantime, please recreate the container with the env var S6_VERBOSITY=2 so we can see exactly which init step is causing the delay and then we can focus there.

Mar 26 '25 15:03 aptalca

Just noticed a couple of things.

You did not set PUID/PGID so the container is running with uid/gid 911:911. That's what it's trying to chown the config folder as. Just fyi at this point.

Also, you have set CUSTOM_USER which is a function of the baseimage but not something I've ever played with. I remember there was a behavior we noticed a while back with the usermod steps in the baseimage where it would recursively force chown the user's home folder. That could be a factor here. Would need to do some testing.

In the meantime, please recreate the container with the env var S6_VERBOSITY=2 so we can see exactly which init step is causing the delay and then we can focus there.

When I first configured the container a long time back, I noticed if I add a PUID/PGID value (most of my other containers are running as 911:911) it wouldn't even start (Even if I CHOWNed the files to match, it would actually never start the container, so I pulled out trying to set the value and let the "default" stand and that seems to be better.. The calibre container seems to be the most fickle of all the containers.. (too "much" of anything seems to break things, so finding that sweet spot has been a bit of a challenge.

Let me add the env variable as suggested so we can get more detailed information.

Thank you

Mar 26 '25 15:03 mrdmiller2

Just noticed a couple of things.

You did not set PUID/PGID so the container is running with uid/gid 911:911. That's what it's trying to chown the config folder as. Just fyi at this point.

Also, you have set CUSTOM_USER which is a function of the baseimage but not something I've ever played with. I remember there was a behavior we noticed a while back with the usermod steps in the baseimage where it would recursively force chown the user's home folder. That could be a factor here. Would need to do some testing.

In the meantime, please recreate the container with the env var S6_VERBOSITY=2 so we can see exactly which init step is causing the delay and then we can focus there.

I don't see how a debug flag is actually helping, but it loads significantly faster now.. (on-par with the rest of my docker containers).

2025-03-26 15:10:34.286621+00:00/package/admin/s6-overlay/libexec/preinit: info: container permissions: uid=0 (root), euid=0, gid=0 (root), egid=0 2025-03-26 15:10:34.286672+00:00/package/admin/s6-overlay/libexec/preinit: info: /run permissions: uid=0 (root), gid=0 (root), perms=oxorgxgruxuwur 2025-03-26 15:10:34.476257+00:00[mod-init] Running Docker Modification Logic 2025-03-26 15:10:34.762844+00:00[mod-init] Adding linuxserver/mods:universal-package-install to container 2025-03-26 15:10:35.244929+00:00[mod-init] Downloading linuxserver/mods:universal-package-install from lscr.io 2025-03-26 15:10:35.606369+00:00[mod-init] Installing linuxserver/mods:universal-package-install 2025-03-26 15:10:35.626594+00:00[mod-init] linuxserver/mods:universal-package-install applied to container 2025-03-26 15:10:35.682995+00:00s6-rc: info: service s6rc-oneshot-runner: starting 2025-03-26 15:10:35.685739+00:00s6-rc: info: service s6rc-oneshot-runner successfully started 2025-03-26 15:10:35.685848+00:00s6-rc: info: service fix-attrs: starting 2025-03-26 15:10:35.686010+00:00s6-rc: info: service init-migrations: starting 2025-03-26 15:10:35.686190+00:00s6-rc: info: service init-envfile: starting 2025-03-26 15:10:35.691943+00:00s6-rc: info: service fix-attrs successfully started 2025-03-26 15:10:35.692030+00:00s6-rc: info: service legacy-cont-init: starting 2025-03-26 15:10:35.693088+00:00[migrations] started 2025-03-26 15:10:35.693153+00:00[migrations] no migrations found 2025-03-26 15:10:35.693612+00:00s6-rc: info: service init-migrations successfully started 2025-03-26 15:10:35.693744+00:00s6-rc: info: service init-adduser: starting 2025-03-26 15:10:35.696497+00:00s6-rc: info: service init-envfile successfully started 2025-03-26 15:10:35.698099+00:00s6-rc: info: service legacy-cont-init successfully started 2025-03-26 15:10:36.271360+00:00usermod: no changes 2025-03-26 15:10:36.273428+00:00─────────────────────────────────────── 2025-03-26 15:10:36.273488+00:002025-03-26T15:10:36.273488886Z 2025-03-26 15:10:36.273508+00:00██╗ ███████╗██╗ ██████╗ 2025-03-26 15:10:36.273541+00:00██║ ██╔════╝██║██╔═══██╗ 2025-03-26 15:10:36.273556+00:00██║ ███████╗██║██║ ██║ 2025-03-26 15:10:36.273569+00:00██║ ╚════██║██║██║ ██║ 2025-03-26 15:10:36.273582+00:00███████╗███████║██║╚██████╔╝ 2025-03-26 15:10:36.273602+00:00╚══════╝╚══════╝╚═╝ ╚═════╝ 2025-03-26 15:10:36.273615+00:002025-03-26T15:10:36.273615179Z 2025-03-26 15:10:36.273627+00:00Brought to you by linuxserver.io 2025-03-26 15:10:36.273641+00:00─────────────────────────────────────── 2025-03-26 15:10:36.273970+00:002025-03-26T15:10:36.273970936Z 2025-03-26 15:10:36.274004+00:00To support LSIO projects visit: 2025-03-26 15:10:36.274018+00:00https://www.linuxserver.io/donate/ 2025-03-26 15:10:36.274029+00:002025-03-26T15:10:36.274029846Z 2025-03-26 15:10:36.274041+00:00─────────────────────────────────────── 2025-03-26 15:10:36.274066+00:00GID/UID 2025-03-26 15:10:36.274080+00:00─────────────────────────────────────── 2025-03-26 15:10:36.278462+00:002025-03-26T15:10:36.278462864Z 2025-03-26 15:10:36.278484+00:00User UID: 911 2025-03-26 15:10:36.278501+00:00User GID: 911 2025-03-26 15:10:36.278509+00:00─────────────────────────────────────── 2025-03-26 15:10:36.279904+00:00Linuxserver.io version: v8.0.1-ls327 2025-03-26 15:10:36.280034+00:00Build-date: 2025-03-26T06:43:58+00:00 2025-03-26 15:10:36.280067+00:00─────────────────────────────────────── 2025-03-26 15:10:36.280077+00:002025-03-26T15:10:36.280077431Z 2025-03-26 15:10:36.297051+00:00s6-rc: info: service init-adduser successfully started 2025-03-26 15:10:36.297106+00:00s6-rc: info: service init-os-end: starting 2025-03-26 15:10:36.298782+00:00s6-rc: info: service init-os-end successfully started 2025-03-26 15:10:36.299029+00:00s6-rc: info: service init-kasmvnc: starting 2025-03-26 15:10:36.300795+00:00s6-rc: info: service init-kasmvnc successfully started 2025-03-26 15:10:36.300928+00:00s6-rc: info: service init-nginx: starting 2025-03-26 15:10:36.449035+00:00s6-rc: info: service init-nginx successfully started 2025-03-26 15:10:36.449137+00:00s6-rc: info: service init-kasmvnc-config: starting 2025-03-26 15:10:36.563831+00:00s6-rc: info: service init-kasmvnc-config successfully started 2025-03-26 15:10:36.563944+00:00s6-rc: info: service init-video: starting 2025-03-26 15:10:36.585888+00:00**** adding /dev/dri/card0 to video group video with id 44 **** 2025-03-26 15:10:36.951663+00:00s6-rc: info: service init-video successfully started 2025-03-26 15:10:36.951903+00:00s6-rc: info: service init-kasmvnc-end: starting 2025-03-26 15:10:36.953611+00:00s6-rc: info: service init-kasmvnc-end successfully started 2025-03-26 15:10:36.953909+00:00s6-rc: info: service init-config: starting 2025-03-26 15:10:36.954151+00:00s6-rc: info: service init-calibre-config: starting 2025-03-26 15:10:36.956253+00:00s6-rc: info: service init-config successfully started 2025-03-26 15:10:36.956398+00:00s6-rc: info: service init-crontab-config: starting 2025-03-26 15:10:36.962854+00:00s6-rc: info: service init-crontab-config successfully started 2025-03-26 15:12:54.550502+00:00s6-rc: info: service init-calibre-config successfully started 2025-03-26 15:12:54.550877+00:00s6-rc: info: service init-config-end: starting 2025-03-26 15:12:54.553016+00:00s6-rc: info: service init-config-end successfully started 2025-03-26 15:12:54.553740+00:00s6-rc: info: service init-mods: starting 2025-03-26 15:12:54.556960+00:00s6-rc: info: service init-mods successfully started 2025-03-26 15:12:54.556998+00:00s6-rc: info: service init-mod-universal-package-install-add-package: starting 2025-03-26 15:12:54.562894+00:00**** Adding fonts-noto-cjk to OS package install list **** 2025-03-26 15:12:54.563480+00:00**** Adding unzip to OS package install list **** 2025-03-26 15:12:54.563548+00:00**** Adding libui-dialog-perl to OS package install list **** 2025-03-26 15:12:54.563574+00:00**** Adding libterm-readline-gnu-perl to OS package install list **** 2025-03-26 15:12:54.563589+00:00**** Adding libfuse2 to OS package install list **** 2025-03-26 15:12:54.563609+00:00**** Adding git to OS package install list **** 2025-03-26 15:12:54.563668+00:00**** Adding gdb to OS package install list **** 2025-03-26 15:12:54.564463+00:00s6-rc: info: service init-mod-universal-package-install-add-package successfully started 2025-03-26 15:12:54.564647+00:00s6-rc: info: service init-mods-package-install: starting 2025-03-26 15:12:54.573392+00:00[pkg-install-init] **** Installing all mod packages **** 2025-03-26 15:12:54.847485+00:00Get:1 https://download.docker.com/linux/ubuntu noble InRelease [48.8 kB] 2025-03-26 15:12:54.996648+00:00Get:2 https://download.docker.com/linux/ubuntu noble/stable amd64 Packages [26.2 kB] 2025-03-26 15:12:55.115304+00:00Get:3 http://archive.ubuntu.com/ubuntu noble InRelease [256 kB] 2025-03-26 15:12:55.824053+00:00Get:4 http://archive.ubuntu.com/ubuntu noble-updates InRelease [126 kB] 2025-03-26 15:12:55.996620+00:00Get:5 http://archive.ubuntu.com/ubuntu noble-security InRelease [126 kB] 2025-03-26 15:12:56.285962+00:00Get:6 http://archive.ubuntu.com/ubuntu noble/restricted Sources [21.8 kB] 2025-03-26 15:12:56.420229+00:00Get:7 http://archive.ubuntu.com/ubuntu noble/main Sources [1,713 kB] 2025-03-26 15:12:56.813532+00:00Get:8 http://archive.ubuntu.com/ubuntu noble/universe Sources [24.3 MB] 2025-03-26 15:12:57.734199+00:00Get:9 http://archive.ubuntu.com/ubuntu noble/multiverse Sources [355 kB] 2025-03-26 15:12:57.747201+00:00Get:10 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages [19.3 MB] 2025-03-26 15:12:58.422673+00:00Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 Packages [1,808 kB] 2025-03-26 15:12:58.484914+00:00Get:12 http://archive.ubuntu.com/ubuntu noble/multiverse amd64 Packages [331 kB] 2025-03-26 15:12:58.495813+00:00Get:13 http://archive.ubuntu.com/ubuntu noble/restricted amd64 Packages [117 kB] 2025-03-26 15:12:58.500112+00:00Get:14 http://archive.ubuntu.com/ubuntu noble-updates/main Sources [490 kB] 2025-03-26 15:12:58.519038+00:00Get:15 http://archive.ubuntu.com/ubuntu noble-updates/universe Sources [530 kB] 2025-03-26 15:12:58.536845+00:00Get:16 http://archive.ubuntu.com/ubuntu noble-updates/restricted Sources [37.1 kB] 2025-03-26 15:12:58.538210+00:00Get:17 http://archive.ubuntu.com/ubuntu noble-updates/multiverse Sources [18.5 kB] 2025-03-26 15:12:58.539074+00:00Get:18 http://archive.ubuntu.com/ubuntu noble-updates/multiverse amd64 Packages [31.1 kB] 2025-03-26 15:12:58.539910+00:00Get:19 http://archive.ubuntu.com/ubuntu noble-updates/restricted amd64 Packages [1,050 kB] 2025-03-26 15:12:58.663800+00:00Get:20 http://archive.ubuntu.com/ubuntu noble-updates/universe amd64 Packages [1,355 kB] 2025-03-26 15:12:58.702136+00:00Get:21 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 Packages [1,209 kB] 2025-03-26 15:12:58.734276+00:00Get:22 http://archive.ubuntu.com/ubuntu noble-security/universe Sources [384 kB] 2025-03-26 15:12:58.745188+00:00Get:23 http://archive.ubuntu.com/ubuntu noble-security/main Sources [195 kB] 2025-03-26 15:12:58.750240+00:00Get:24 http://archive.ubuntu.com/ubuntu noble-security/restricted Sources [34.6 kB] 2025-03-26 15:12:58.751518+00:00Get:25 http://archive.ubuntu.com/ubuntu noble-security/multiverse Sources [11.8 kB] 2025-03-26 15:12:58.752247+00:00Get:26 http://archive.ubuntu.com/ubuntu noble-security/multiverse amd64 Packages [26.5 kB] 2025-03-26 15:12:58.753170+00:00Get:27 http://archive.ubuntu.com/ubuntu noble-security/main amd64 Packages [848 kB] 2025-03-26 15:12:58.802535+00:00Get:28 http://archive.ubuntu.com/ubuntu noble-security/restricted amd64 Packages [922 kB] 2025-03-26 15:12:58.828904+00:00Get:29 http://archive.ubuntu.com/ubuntu noble-security/universe amd64 Packages [1,062 kB] 2025-03-26 15:13:00.676807+00:00Fetched 56.7 MB in 6s (9,661 kB/s) 2025-03-26 15:13:01.814138+00:00Reading package lists... 2025-03-26 15:13:03.430863+00:00Reading package lists... 2025-03-26 15:13:03.648040+00:00Building dependency tree... 2025-03-26 15:13:03.648864+00:00Reading state information... 2025-03-26 15:13:03.891345+00:00The following additional packages will be installed: 2025-03-26 15:13:03.891681+00:00git-man libbabeltrace1 libdebuginfod-common libdebuginfod1t64 libdw1t64 2025-03-26 15:13:03.892400+00:00libelf1t64 liberror-perl libfile-slurp-perl libipt2 libpython3.12t64 2025-03-26 15:13:03.893031+00:00libsource-highlight-common libsource-highlight4t64 libstring-shellquote-perl 2025-03-26 15:13:03.894753+00:00Suggested packages: 2025-03-26 15:13:03.894781+00:00fonts-noto-cjk-extra gdb-doc gdbserver gettext-base git-daemon-run 2025-03-26 15:13:03.894814+00:00| git-daemon-sysvinit git-doc git-email git-gui gitk gitweb git-cvs 2025-03-26 15:13:03.894824+00:00git-mediawiki git-svn zip 2025-03-26 15:13:03.894832+00:00Recommended packages: 2025-03-26 15:13:03.894840+00:00libc-dbg patch less 2025-03-26 15:13:04.126336+00:00The following NEW packages will be installed: 2025-03-26 15:13:04.126639+00:00fonts-noto-cjk gdb git git-man libbabeltrace1 libdebuginfod-common 2025-03-26 15:13:04.126988+00:00libdebuginfod1t64 liberror-perl libfile-slurp-perl libfuse2t64 libipt2 2025-03-26 15:13:04.127428+00:00libpython3.12t64 libsource-highlight-common libsource-highlight4t64 2025-03-26 15:13:04.128162+00:00libstring-shellquote-perl libterm-readline-gnu-perl libui-dialog-perl unzip 2025-03-26 15:13:04.129120+00:00The following packages will be upgraded: 2025-03-26 15:13:04.130233+00:00libdw1t64 libelf1t64 2025-03-26 15:13:04.415078+00:002 upgraded, 18 newly installed, 0 to remove and 3 not upgraded. 2025-03-26 15:13:04.415146+00:00Need to get 73.8 MB of archives. 2025-03-26 15:13:04.415203+00:00After this operation, 143 MB of additional disk space will be used. 2025-03-26 15:13:04.415229+00:00Get:1 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdebuginfod-common all 0.190-1.1ubuntu0.1 [14.6 kB] 2025-03-26 15:13:04.669859+00:00Get:2 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdw1t64 amd64 0.190-1.1ubuntu0.1 [261 kB] 2025-03-26 15:13:05.138999+00:00Get:3 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libelf1t64 amd64 0.190-1.1ubuntu0.1 [57.8 kB] 2025-03-26 15:13:05.173705+00:00Get:4 http://archive.ubuntu.com/ubuntu noble/main amd64 fonts-noto-cjk all 1:20230817+repack1-3 [61.2 MB] 2025-03-26 15:13:07.675121+00:00Get:5 http://archive.ubuntu.com/ubuntu noble/main amd64 libbabeltrace1 amd64 1.5.11-3build3 [164 kB] 2025-03-26 15:13:07.681817+00:00Get:6 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdebuginfod1t64 amd64 0.190-1.1ubuntu0.1 [17.1 kB] 2025-03-26 15:13:07.682577+00:00Get:7 http://archive.ubuntu.com/ubuntu noble/main amd64 libipt2 amd64 2.0.6-1build1 [45.7 kB] 2025-03-26 15:13:07.684541+00:00Get:8 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libpython3.12t64 amd64 3.12.3-1ubuntu0.5 [2,339 kB] 2025-03-26 15:13:07.766554+00:00Get:9 http://archive.ubuntu.com/ubuntu noble/main amd64 libsource-highlight-common all 3.1.9-4.3build1 [64.2 kB] 2025-03-26 15:13:07.768696+00:00Get:10 http://archive.ubuntu.com/ubuntu noble/main amd64 libsource-highlight4t64 amd64 3.1.9-4.3build1 [258 kB] 2025-03-26 15:13:07.776683+00:00Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 gdb amd64 15.0.50.20240403-0ubuntu1 [4,010 kB] 2025-03-26 15:13:07.919690+00:00Get:12 http://archive.ubuntu.com/ubuntu noble/main amd64 liberror-perl all 0.17029-2 [25.6 kB] 2025-03-26 15:13:07.920519+00:00Get:13 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git-man all 1:2.43.0-1ubuntu7.2 [1,100 kB] 2025-03-26 15:13:07.963534+00:00Get:14 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git amd64 1:2.43.0-1ubuntu7.2 [3,679 kB] 2025-03-26 15:13:08.093209+00:00Get:15 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfile-slurp-perl all 9999.32-2 [21.7 kB] 2025-03-26 15:13:08.093850+00:00Get:16 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfuse2t64 amd64 2.9.9-8.1build1 [89.9 kB] 2025-03-26 15:13:08.096882+00:00Get:17 http://archive.ubuntu.com/ubuntu noble/main amd64 libstring-shellquote-perl all 1.04-3 [11.3 kB] 2025-03-26 15:13:08.097348+00:00Get:18 http://archive.ubuntu.com/ubuntu noble/universe amd64 libterm-readline-gnu-perl amd64 1.46-1build3 [89.9 kB] 2025-03-26 15:13:08.099755+00:00Get:19 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 unzip amd64 6.0-28ubuntu4.1 [174 kB] 2025-03-26 15:13:08.107164+00:00Get:20 http://archive.ubuntu.com/ubuntu noble/universe amd64 libui-dialog-perl all 1.21-0.1 [131 kB] 2025-03-26 15:13:10.198520+00:00Preconfiguring packages ... 2025-03-26 15:13:10.641297+00:00Fetched 73.8 MB in 4s (18.6 MB/s) 2025-03-26 15:13:10.965847+00:00Selecting previously unselected package libdebuginfod-common. 2025-03-26 15:13:11.032332+00:00(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 36109 files and directories currently installed.) 2025-03-26 15:13:11.034863+00:00Preparing to unpack .../00-libdebuginfod-common_0.190-1.1ubuntu0.1_all.deb ... 2025-03-26 15:13:11.059602+00:00Unpacking libdebuginfod-common (0.190-1.1ubuntu0.1) ... 2025-03-26 15:13:11.289523+00:00Preparing to unpack .../01-libdw1t64_0.190-1.1ubuntu0.1_amd64.deb ... 2025-03-26 15:13:11.340797+00:00Unpacking libdw1t64:amd64 (0.190-1.1ubuntu0.1) over (0.190-1.1build4.1) ... 2025-03-26 15:13:11.749526+00:00Preparing to unpack .../02-libelf1t64_0.190-1.1ubuntu0.1_amd64.deb ... 2025-03-26 15:13:11.787933+00:00Unpacking libelf1t64:amd64 (0.190-1.1ubuntu0.1) over (0.190-1.1build4.1) ... 2025-03-26 15:13:12.295571+00:00Selecting previously unselected package fonts-noto-cjk. 2025-03-26 15:13:12.302803+00:00Preparing to unpack .../03-fonts-noto-cjk_1%3a20230817+repack1-3_all.deb ... 2025-03-26 15:13:12.322935+00:00Unpacking fonts-noto-cjk (1:20230817+repack1-3) ... 2025-03-26 15:13:13.731636+00:00Selecting previously unselected package libbabeltrace1:amd64. 2025-03-26 15:13:13.738645+00:00Preparing to unpack .../04-libbabeltrace1_1.5.11-3build3_amd64.deb ... 2025-03-26 15:13:13.756361+00:00Unpacking libbabeltrace1:amd64 (1.5.11-3build3) ... 2025-03-26 15:13:13.896851+00:00Selecting previously unselected package libdebuginfod1t64:amd64. 2025-03-26 15:13:13.904298+00:00Preparing to unpack .../05-libdebuginfod1t64_0.190-1.1ubuntu0.1_amd64.deb ... 2025-03-26 15:13:13.912264+00:00Unpacking libdebuginfod1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 15:13:14.008763+00:00Selecting previously unselected package libipt2. 2025-03-26 15:13:14.013627+00:00Preparing to unpack .../06-libipt2_2.0.6-1build1_amd64.deb ... 2025-03-26 15:13:14.025224+00:00Unpacking libipt2 (2.0.6-1build1) ... 2025-03-26 15:13:14.158369+00:00Selecting previously unselected package libpython3.12t64:amd64. 2025-03-26 15:13:14.163389+00:00Preparing to unpack .../07-libpython3.12t64_3.12.3-1ubuntu0.5_amd64.deb ... 2025-03-26 15:13:14.182396+00:00Unpacking libpython3.12t64:amd64 (3.12.3-1ubuntu0.5) ... 2025-03-26 15:13:14.412097+00:00Selecting previously unselected package libsource-highlight-common. 2025-03-26 15:13:14.417925+00:00Preparing to unpack .../08-libsource-highlight-common_3.1.9-4.3build1_all.deb ... 2025-03-26 15:13:14.436568+00:00Unpacking libsource-highlight-common (3.1.9-4.3build1) ... 2025-03-26 15:13:14.586986+00:00Selecting previously unselected package libsource-highlight4t64:amd64. 2025-03-26 15:13:14.593885+00:00Preparing to unpack .../09-libsource-highlight4t64_3.1.9-4.3build1_amd64.deb ... 2025-03-26 15:13:14.604637+00:00Unpacking libsource-highlight4t64:amd64 (3.1.9-4.3build1) ... 2025-03-26 15:13:14.698556+00:00Selecting previously unselected package gdb. 2025-03-26 15:13:14.703778+00:00Preparing to unpack .../10-gdb_15.0.50.20240403-0ubuntu1_amd64.deb ... 2025-03-26 15:13:14.713458+00:00Unpacking gdb (15.0.50.20240403-0ubuntu1) ... 2025-03-26 15:13:14.949320+00:00Selecting previously unselected package liberror-perl. 2025-03-26 15:13:14.954392+00:00Preparing to unpack .../11-liberror-perl_0.17029-2_all.deb ... 2025-03-26 15:13:14.964730+00:00Unpacking liberror-perl (0.17029-2) ... 2025-03-26 15:13:15.044536+00:00Selecting previously unselected package git-man. 2025-03-26 15:13:15.050140+00:00Preparing to unpack .../12-git-man_1%3a2.43.0-1ubuntu7.2_all.deb ... 2025-03-26 15:13:15.060842+00:00Unpacking git-man (1:2.43.0-1ubuntu7.2) ... 2025-03-26 15:13:15.206103+00:00Selecting previously unselected package git. 2025-03-26 15:13:15.211770+00:00Preparing to unpack .../13-git_1%3a2.43.0-1ubuntu7.2_amd64.deb ... 2025-03-26 15:13:15.237313+00:00Unpacking git (1:2.43.0-1ubuntu7.2) ... 2025-03-26 15:13:15.603410+00:00Selecting previously unselected package libfile-slurp-perl. 2025-03-26 15:13:15.608566+00:00Preparing to unpack .../14-libfile-slurp-perl_9999.32-2_all.deb ... 2025-03-26 15:13:15.623097+00:00Unpacking libfile-slurp-perl (9999.32-2) ... 2025-03-26 15:13:15.739491+00:00Selecting previously unselected package libfuse2t64:amd64. 2025-03-26 15:13:15.746991+00:00Preparing to unpack .../15-libfuse2t64_2.9.9-8.1build1_amd64.deb ... 2025-03-26 15:13:15.760072+00:00Unpacking libfuse2t64:amd64 (2.9.9-8.1build1) ... 2025-03-26 15:13:15.899418+00:00Selecting previously unselected package libstring-shellquote-perl. 2025-03-26 15:13:15.906931+00:00Preparing to unpack .../16-libstring-shellquote-perl_1.04-3_all.deb ... 2025-03-26 15:13:15.920953+00:00Unpacking libstring-shellquote-perl (1.04-3) ... 2025-03-26 15:13:16.035558+00:00Selecting previously unselected package libterm-readline-gnu-perl. 2025-03-26 15:13:16.043375+00:00Preparing to unpack .../17-libterm-readline-gnu-perl_1.46-1build3_amd64.deb ... 2025-03-26 15:13:16.063761+00:00Unpacking libterm-readline-gnu-perl (1.46-1build3) ... 2025-03-26 15:13:16.231963+00:00Selecting previously unselected package unzip. 2025-03-26 15:13:16.236979+00:00Preparing to unpack .../18-unzip_6.0-28ubuntu4.1_amd64.deb ... 2025-03-26 15:13:16.254270+00:00Unpacking unzip (6.0-28ubuntu4.1) ... 2025-03-26 15:13:16.433918+00:00Selecting previously unselected package libui-dialog-perl. 2025-03-26 15:13:16.439035+00:00Preparing to unpack .../19-libui-dialog-perl_1.21-0.1_all.deb ... 2025-03-26 15:13:16.461819+00:00Unpacking libui-dialog-perl (1.21-0.1) ... 2025-03-26 15:13:16.723968+00:00Setting up libfile-slurp-perl (9999.32-2) ... 2025-03-26 15:13:16.771664+00:00Setting up libdebuginfod-common (0.190-1.1ubuntu0.1) ... 2025-03-26 15:13:17.022806+00:00Setting up unzip (6.0-28ubuntu4.1) ... 2025-03-26 15:13:17.100525+00:00Setting up fonts-noto-cjk (1:20230817+repack1-3) ... 2025-03-26 15:13:17.209618+00:00Setting up libterm-readline-gnu-perl (1.46-1build3) ... 2025-03-26 15:13:17.285397+00:00Setting up libstring-shellquote-perl (1.04-3) ... 2025-03-26 15:13:17.369005+00:00Setting up libsource-highlight-common (3.1.9-4.3build1) ... 2025-03-26 15:13:17.435527+00:00Setting up libelf1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 15:13:17.497512+00:00Setting up libdw1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 15:13:17.558065+00:00Setting up liberror-perl (0.17029-2) ... 2025-03-26 15:13:17.622078+00:00Setting up libpython3.12t64:amd64 (3.12.3-1ubuntu0.5) ... 2025-03-26 15:13:17.691395+00:00Setting up libipt2 (2.0.6-1build1) ... 2025-03-26 15:13:17.752954+00:00Setting up libbabeltrace1:amd64 (1.5.11-3build3) ... 2025-03-26 15:13:17.815839+00:00Setting up git-man (1:2.43.0-1ubuntu7.2) ... 2025-03-26 15:13:17.880508+00:00Setting up libui-dialog-perl (1.21-0.1) ... 2025-03-26 15:13:17.947227+00:00Setting up libfuse2t64:amd64 (2.9.9-8.1build1) ... 2025-03-26 15:13:18.010709+00:00Setting up libdebuginfod1t64:amd64 (0.190-1.1ubuntu0.1) ... 2025-03-26 15:13:18.077249+00:00Setting up libsource-highlight4t64:amd64 (3.1.9-4.3build1) ... 2025-03-26 15:13:18.168004+00:00Setting up gdb (15.0.50.20240403-0ubuntu1) ... 2025-03-26 15:13:18.262501+00:00Setting up git (1:2.43.0-1ubuntu7.2) ... 2025-03-26 15:13:18.370564+00:00Processing triggers for libc-bin (2.39-0ubuntu8.4) ... 2025-03-26 15:13:20.816635+00:00Processing triggers for man-db (2.12.0-4build2) ... 2025-03-26 15:13:24.150821+00:00Processing triggers for fontconfig (2.15.0-1.1ubuntu2) ... 2025-03-26 15:13:24.727715+00:00s6-rc: info: service init-mods-package-install successfully started 2025-03-26 15:13:24.727823+00:00s6-rc: info: service init-mods-end: starting 2025-03-26 15:13:24.730213+00:00s6-rc: info: service init-mods-end successfully started 2025-03-26 15:13:24.730442+00:00s6-rc: info: service init-custom-files: starting 2025-03-26 15:13:24.736270+00:00[custom-init] No custom files found, skipping... 2025-03-26 15:13:24.736800+00:00s6-rc: info: service init-custom-files successfully started 2025-03-26 15:13:24.737001+00:00s6-rc: info: service init-services: starting 2025-03-26 15:13:24.739056+00:00s6-rc: info: service init-services successfully started 2025-03-26 15:13:24.739195+00:00s6-rc: info: service svc-pulseaudio: starting 2025-03-26 15:13:24.739419+00:00s6-rc: info: service svc-cron: starting 2025-03-26 15:13:24.741434+00:00s6-rc: info: service svc-pulseaudio successfully started 2025-03-26 15:13:24.741623+00:00s6-rc: info: service svc-kasmvnc: starting 2025-03-26 15:13:24.742038+00:00s6-rc: info: service svc-cron successfully started 2025-03-26 15:13:24.744008+00:00s6-rc: info: service svc-kasmvnc successfully started 2025-03-26 15:13:24.744201+00:00s6-rc: info: service svc-kclient: starting 2025-03-26 15:13:24.746473+00:00s6-rc: info: service svc-kclient successfully started 2025-03-26 15:13:24.746682+00:00s6-rc: info: service svc-nginx: starting 2025-03-26 15:13:24.749145+00:00s6-rc: info: service svc-nginx successfully started 2025-03-26 15:13:24.749297+00:00s6-rc: info: service svc-de: starting 2025-03-26 15:13:24.751438+00:00s6-rc: info: service svc-de successfully started 2025-03-26 15:13:24.751595+00:00s6-rc: info: service svc-docker: starting 2025-03-26 15:13:24.753747+00:00s6-rc: info: service svc-docker successfully started 2025-03-26 15:13:24.753869+00:00s6-rc: info: service legacy-services: starting 2025-03-26 15:13:24.761833+00:00s6-rc: info: service legacy-services successfully started 2025-03-26 15:13:24.761930+00:00s6-rc: info: service ci-service-check: starting 2025-03-26 15:13:24.763640+00:00[ls.io-init] done. 2025-03-26 15:13:24.764060+00:00s6-rc: info: service ci-service-check successfully started 2025-03-26 15:13:24.842619+00:00Openbox-Message: Failed to open the display from the DISPLAY environment variable. 2025-03-26 15:13:24.877117+00:00_XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. 2025-03-26 15:13:24.877609+00:002025-03-26T15:13:24.877609479Z 2025-03-26 15:13:24.877637+00:00Xvnc KasmVNC 1.3.3 - built Mar 22 2025 19:06:40 2025-03-26 15:13:24.877647+00:00Copyright (C) 1999-2018 KasmVNC Team and many others (see README.me) 2025-03-26 15:13:24.877688+00:00See http://kasmweb.com for information on KasmVNC. 2025-03-26 15:13:24.877698+00:00Underlying X server release 12101012 2025-03-26 15:13:24.877705+00:002025-03-26T15:13:24.877705781Z 2025-03-26 15:13:24.938484+00:00The XKEYBOARD keymap compiler (xkbcomp) reports: 2025-03-26 15:13:24.938564+00:00> Warning: Could not resolve keysym XF86CameraAccessEnable 2025-03-26 15:13:24.938636+00:00> Warning: Could not resolve keysym XF86CameraAccessDisable 2025-03-26 15:13:24.938666+00:00> Warning: Could not resolve keysym XF86CameraAccessToggle 2025-03-26 15:13:24.938688+00:00> Warning: Could not resolve keysym XF86NextElement 2025-03-26 15:13:24.938761+00:00> Warning: Could not resolve keysym XF86PreviousElement 2025-03-26 15:13:24.938796+00:00> Warning: Could not resolve keysym XF86AutopilotEngageToggle 2025-03-26 15:13:24.938822+00:00> Warning: Could not resolve keysym XF86MarkWaypoint 2025-03-26 15:13:24.938849+00:00> Warning: Could not resolve keysym XF86Sos 2025-03-26 15:13:24.938902+00:00> Warning: Could not resolve keysym XF86NavChart 2025-03-26 15:13:24.938940+00:00> Warning: Could not resolve keysym XF86FishingChart 2025-03-26 15:13:24.938965+00:00> Warning: Could not resolve keysym XF86SingleRangeRadar 2025-03-26 15:13:24.938991+00:00> Warning: Could not resolve keysym XF86DualRangeRadar 2025-03-26 15:13:24.939047+00:00> Warning: Could not resolve keysym XF86RadarOverlay 2025-03-26 15:13:24.939080+00:00> Warning: Could not resolve keysym XF86TraditionalSonar 2025-03-26 15:13:24.939107+00:00> Warning: Could not resolve keysym XF86ClearvuSonar 2025-03-26 15:13:24.939132+00:00> Warning: Could not resolve keysym XF86SidevuSonar 2025-03-26 15:13:24.939206+00:00> Warning: Could not resolve keysym XF86NavInfo 2025-03-26 15:13:24.939728+00:00Errors from xkbcomp are not fatal to the X server 2025-03-26 15:13:24.942280+00:00[mi] mieq: warning: overriding existing handler (nil) with 0x55a06bff6930 for event 2 2025-03-26 15:13:24.942362+00:00[mi] mieq: warning: overriding existing handler (nil) with 0x55a06bff6930 for event 3 2025-03-26 15:13:25.274235+00:0019 2025-03-26 15:13:25.872863+00:00Obt-Message: Xinerama extension is not present on the server 2025-03-26 15:13:30.286846+00:00Traceback (most recent call last): 2025-03-26 15:13:30.286909+00:00File "calibre/gui2/ui.py", line 148, in init 2025-03-26 15:13:30.286967+00:00File "calibre/gui2/ui.py", line 166, in init_iaction 2025-03-26 15:13:30.286984+00:00File "calibre/customize/init.py", line 658, in load_actual_plugin 2025-03-26 15:13:30.286997+00:00File "importlib/init.py", line 126, in import_module 2025-03-26 15:13:30.287049+00:00File "", line 1204, in _gcd_import 2025-03-26 15:13:30.287117+00:00File "", line 1176, in _find_and_load 2025-03-26 15:13:30.287131+00:00File "", line 1147, in _find_and_load_unlocked 2025-03-26 15:13:30.287139+00:00File "", line 690, in _load_unlocked 2025-03-26 15:13:30.287172+00:00File "calibre/customize/zipplugin.py", line 203, in exec_module 2025-03-26 15:13:30.287193+00:00File "calibre/customize/zipplugin.py", line 199, in get_code 2025-03-26 15:13:30.287242+00:00File "calibre_plugins.savetoformat.savetoformataction", line 53 2025-03-26 15:13:30.287292+00:00print 'Default saving' 2025-03-26 15:13:30.287333+00:00^^^^^^^^^^^^^^^^^^^^^^ 2025-03-26 15:13:30.287355+00:00SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? 2025-03-26 15:13:30.332529+00:00time="2025-03-26T08:13:30.332332538-07:00" level=error msg="failed to mount overlay: invalid argument" storage-driver=overlay2 2025-03-26 15:13:32.839173+00:00Using QT6 2025-03-26 15:13:32.839248+00:00Ya existen las librerias mutagen y rarfile 2025-03-26 15:13:32.839265+00:00Textdiff: self.menu:

So that's very odd.. let me disable the flag to see if the delay returns..

Mar 26 '25 15:03 mrdmiller2

It seems your issue is intermittent which makes it much harder to diagnose.

But with the debug flag, you can see that there are about 5 different init steps between the video perm fixing and the mod package additions. If you can recreate the delay, we can at least see which init step is causing the delay and look into that one

Mar 26 '25 15:03 aptalca

Yeah, its very odd... with the S6_VERBOSITY=2 added, it boots right up.. no delay.. without the S6_VERBOSITY=2 flag added, it is consistently pausing..

So its not intermittent, but there is a variable at play that I don't understand.. (I don't get why a debug variable would actually IMPROVE performance).

Mar 26 '25 15:03 mrdmiller2

The debug variable does nothing other than print or hide log messages: https://github.com/just-containers/s6-overlay#:~:text=S6_VERBOSITY%20(default%20%3D%202,shouldn%27t%20need%20this.

Your issue may be time based. Maybe something else on your system is messing with those folder's permissions every once in a while and whenever that happens, calibre container needs to chown. It's just one guess.

Mar 26 '25 15:03 aptalca

The debug variable does nothing other than print or hide log messages: https://github.com/just-containers/s6-overlay#:~:text=S6_VERBOSITY%20(default%20%3D%202,shouldn%27t%20need%20this.

Your issue may be time based. Maybe something else on your system is messing with those folder's permissions every once in a while and whenever that happens, calibre container needs to chown. It's just one guess.

But that's just it.. its VERY consistent in its behaviour.. without the env option it is ALWAYS taking 15+ minutes to boot..(I've restarted the container like hundreds of times in the past year... I don't "automate" the restart because of the long pause it takes, otherwise I would have just had it "restart" every 24 hours to address the performance issue

With the flag, so far, I've restarted it 10 times, and its going straight in with zero pauses at that point.

There are no processes that are touching the calibre files.. (no permissions changes, its local, so no spinlocks or share delays, etc..).. its as close to "native" as one can possibly be, even and during this testing, I have quelled things like readarr and calibre-web specifically to prevent those from being variables..

Mar 26 '25 15:03 mrdmiller2

This issue has been automatically marked as stale because it has not had recent activity. This might be due to missing feedback from OP. It will be closed if no further activity occurs. Thank you for your contributions.

Apr 25 '25 20:04 LinuxServer-CI

This issue is locked due to inactivity

Jul 24 '25 20:07 LinuxServer-CI